ReportizFlow
Filtered by vendor
Subscriptions
Total
699 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-6985 | 1 Cesanta | 1 Mongoose | 2026-04-27 | 5.3 Medium |
| A weakness has been identified in Cesanta Mongoose up to 7.20. This vulnerability affects the function handle_opt of the file /src/net_builtin.c of the component TCP Option Handler. This manipulation of the argument optlen causes infinite loop. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 7.21 is able to resolve this issue. Upgrading the affected component is advised. VulDB has contacted the vendor early and they confirmed quickly, that this issue got fixed already. | ||||
| CVE-2026-5313 | 1 Nothings | 1 Stb | 2026-04-24 | 4.3 Medium |
| A vulnerability has been found in Nothings stb up to 2.30. This issue affects the function stbi__gif_load_next in the library stb_image.h of the component GIF Decoder. Such manipulation leads to denial of service. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-6042 | 1 Musl | 1 Libc | 2026-04-24 | 3.3 Low |
| A security flaw has been discovered in musl libc up to 1.2.6. Affected is the function iconv of the file src/locale/iconv.c of the component GB18030 4-byte Decoder. Performing a manipulation results in inefficient algorithmic complexity. The attack must be initiated from a local position. To fix this issue, it is recommended to deploy a patch. | ||||
| CVE-2026-4833 | 1 Orc | 1 Discount | 2026-04-24 | 3.3 Low |
| A weakness has been identified in Orc discount up to 3.0.1.2. This issue affects the function compile of the file markdown.c of the component Markdown Handler. This manipulation causes uncontrolled recursion. The attack is restricted to local execution. The exploit has been made available to the public and could be used for attacks. The project maintainer confirms: "[I]f you feed it an infinitely deep blockquote input it will crash. (...) [T]his is a duplicate of an old bug that I've been working on." | ||||
| CVE-2026-4531 | 1 Free5gc | 1 Free5gc | 2026-04-24 | 5.3 Medium |
| A weakness has been identified in Free5GC 4.1.0. Affected is the function HandleRegistrationComplete of the file internal/gmm/handler.go of the component AMF. Executing a manipulation can lead to denial of service. The attack may be performed from remote. This patch is called 52e9386401ce56ea773c5aa587d4cdf7d53da799. It is best practice to apply a patch to resolve this issue. | ||||
| CVE-2026-1875 | 1 Mitsubishi Electric Corporation | 1 Melsec Iq-f Series Fx5-eip Ethernet/ip Module Fx5-eip | 2026-04-24 | N/A |
| Improper Resource Shutdown or Release vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-EIP EtherNet/IP Module FX5-EIP versions 1.000 and prior allows a remote attacker to cause a denial-of-service (DoS) condition on the products by continuously sending UDP packets to the products. A system reset of the product is required for recovery. | ||||
| CVE-2026-4174 | 1 Radare | 1 Radare2 | 2026-04-23 | 3.3 Low |
| A vulnerability has been found in Radare2 5.9.9. This issue affects the function walk_exports_trie of the file libr/bin/format/mach0/mach0.c of the component Mach-O File Parser. Such manipulation leads to resource consumption. The attack can only be performed from a local environment. The exploit has been disclosed to the public and may be used. The existence of this vulnerability is still disputed at present. Upgrading to version 6.1.2 is capable of addressing this issue. The name of the patch is 4371ae84c99c46b48cb21badbbef06b30757aba0. You should upgrade the affected component. The code maintainer states that, "[he] wont consider this bug a DoS". | ||||
| CVE-2026-3465 | 1 Tuya | 2 App, Sdk | 2026-04-23 | 3.1 Low |
| A vulnerability was determined in Tuya App and SDK 24.07.11 on Android. Affected by this vulnerability is an unknown functionality of the component JSON Data Point Handler. This manipulation of the argument cruise_time causes denial of service. Remote exploitation of the attack is possible. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been publicly disclosed and may be utilized. There is ongoing doubt regarding the real existence of this vulnerability. The vendor disagrees with the conclusion of the finding: "The described vulnerability fails to prove its feasibility or exploitability by attackers. The issue essentially does not constitute a security vulnerability, aligning more closely with abnormal product functionality." These considerations are properly reflected within the CVSS vector. | ||||
| CVE-2026-6601 | 1 Lagom | 1 Whmcs Template | 2026-04-22 | 4.3 Medium |
| A vulnerability has been found in Lagom WHMCS Template up to 2.4.2. This impacts an unknown function of the component Datatables. The manipulation leads to resource consumption. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-6797 | 2 Publiccms, Sanluan | 2 Publiccms, Publiccms | 2026-04-22 | 4.3 Medium |
| A vulnerability was identified in Sanluan PublicCMS up to 6.202506.d. Affected by this vulnerability is the function ZipSecureFile.setMinflateRatio of the file common/src/main/java/com/publiccms/common/tools/DocToHtmlUtils.java. Such manipulation leads to resource consumption. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-6607 | 1 Lm-sys | 1 Fastchat | 2026-04-22 | 5.3 Medium |
| A security vulnerability has been detected in lm-sys fastchat up to 0.2.36. This issue affects the function api_generate of the component Worker API Endpoint. The manipulation leads to resource consumption. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The identifier of the patch is c9e84b89c91d45191dc24466888de526fa04cf33. It is suggested to install a patch to address this issue. Commit ff66426 patched this issue in api_generate of base_model_worker.py and did miss other entry points. | ||||
| CVE-2017-6627 | 1 Cisco | 2 Ios, Ios Xe | 2026-04-22 | 7.5 High |
| A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506. | ||||
| CVE-2025-43935 | 1 Dell | 1 Powerscale Onefs | 2026-04-21 | 4.4 Medium |
| Dell PowerScale OneFS, versions prior to 9.12.0.0, contains an improper resource shutdown or release vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to denial of service. | ||||
| CVE-2026-1587 | 1 Open5gs | 1 Open5gs | 2026-04-18 | 5.3 Medium |
| A vulnerability has been found in Open5GS up to 2.7.6. The affected element is the function sgwc_s11_handle_modify_bearer_request of the file /sgwc/s11-handler.c of the component SGWC. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Applying a patch is the recommended action to fix this issue. The issue report is flagged as already-fixed. | ||||
| CVE-2026-1171 | 1 Birkir | 1 Prime | 2026-04-18 | 5.3 Medium |
| A flaw has been found in birkir prime up to 0.4.0.beta.0. Impacted is an unknown function of the file /graphql of the component GraphQL Field Handler. Executing a manipulation can lead to denial of service. The attack may be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-1416 | 1 Gpac | 1 Gpac | 2026-04-18 | 3.3 Low |
| A security flaw has been discovered in GPAC up to 2.4.0. Affected by this vulnerability is the function DumpMovieInfo of the file applications/mp4box/filedump.c. The manipulation results in null pointer dereference. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. The patch is identified as d45c264c20addf0c1cc05124ede33f8ffa800e68. It is advisable to implement a patch to correct this issue. | ||||
| CVE-2026-23034 | 1 Linux | 1 Linux Kernel | 2026-04-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Fix fence reference leak on queue teardown v2 The user mode queue keeps a pointer to the most recent fence in userq->last_fence. This pointer holds an extra dma_fence reference. When the queue is destroyed, we free the fence driver and its xarray, but we forgot to drop the last_fence reference. Because of the missing dma_fence_put(), the last fence object can stay alive when the driver unloads. This leaves an allocated object in the amdgpu_userq_fence slab cache and triggers This is visible during driver unload as: BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown() kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects Call Trace: kmem_cache_destroy amdgpu_userq_fence_slab_fini amdgpu_exit __do_sys_delete_module Fix this by putting userq->last_fence and clearing the pointer during amdgpu_userq_fence_driver_free(). This makes sure the fence reference is released and the slab cache is empty when the module exits. v2: Update to only release userq->last_fence with dma_fence_put() (Christian) (cherry picked from commit 8e051e38a8d45caf6a866d4ff842105b577953bb) | ||||
| CVE-2026-1975 | 1 Free5gc | 1 Free5gc | 2026-04-18 | 5.3 Medium |
| A security flaw has been discovered in Free5GC up to 4.1.0. This impacts the function identityTriggerType of the file pfcp_reports.go. The manipulation results in null pointer dereference. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Applying a patch is advised to resolve this issue. | ||||
| CVE-2026-1991 | 1 Libuvc | 2 Libuvc, Uvc Descriptor Handler | 2026-04-18 | 3.3 Low |
| A vulnerability was detected in libuvc up to 0.0.7. Affected is the function uvc_scan_streaming of the file src/device.c of the component UVC Descriptor Handler. The manipulation results in null pointer dereference. The attack needs to be approached locally. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-2108 | 1 Jsbroks | 1 Coco Annotator | 2026-04-18 | 5.3 Medium |
| A vulnerability was determined in jsbroks COCO Annotator up to 0.11.1. This impacts an unknown function of the file /api/info/long_task of the component Endpoint. This manipulation causes denial of service. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||