Filtered by vendor Redhat Subscriptions
Total 22962 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2024-5535 2 Openssl, Redhat 7 Openssl, Enterprise Linux, Jboss Core Services and 4 more 2025-09-01 9.1 Critical
Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.
CVE-2025-6021 1 Redhat 11 Discovery, Enterprise Linux, Insights Proxy and 8 more 2025-08-31 7.5 High
A flaw was found in libxml2's xmlBuildQName function, where integer overflows in buffer size calculations can lead to a stack-based buffer overflow. This issue can result in memory corruption or a denial of service when processing crafted input.
CVE-2025-47711 2 Nbdkit Project, Redhat 4 Nbdkit, Advanced Virtualization, Enterprise Linux and 1 more 2025-08-31 4.3 Medium
There's a flaw in the nbdkit server when handling responses from its plugins regarding the status of data blocks. If a client makes a specific request for a very large data range, and a plugin responds with an even larger single block, the nbdkit server can encounter a critical internal error, leading to a denial-of-service.
CVE-2025-2842 1 Redhat 1 Openshift Distributed Tracing 2025-08-31 4.3 Medium
A flaw was found in the Tempo Operator. When the Jaeger UI Monitor Tab functionality is enabled in a Tempo instance managed by the Tempo Operator, the Operator creates a ClusterRoleBinding for the Service Account of the Tempo instance to grant the cluster-monitoring-view ClusterRole. This can be exploited if a user has 'create' permissions on TempoStack and 'get' permissions on Secret in a namespace (for example, a user has ClusterAdmin permissions for a specific namespace), as the user can read the token of the Tempo service account and therefore has access to see all cluster metrics.
CVE-2025-2786 1 Redhat 1 Openshift Distributed Tracing 2025-08-31 4.3 Medium
A flaw was found in Tempo Operator, where it creates a ServiceAccount, ClusterRole, and ClusterRoleBinding when a user deploys a TempoStack or TempoMonolithic instance. This flaw allows a user with full access to their namespace to extract the ServiceAccount token and use it to submit TokenReview and SubjectAccessReview requests, potentially revealing information about other users' permissions. While this does not allow privilege escalation or impersonation, it exposes information that could aid in gathering information for further attacks.
CVE-2025-7195 1 Redhat 12 Acm, Advanced Cluster Security, Apicurio Registry and 9 more 2025-08-31 5.2 Medium
Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images. In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.
CVE-2025-6395 1 Redhat 2 Enterprise Linux, Openshift 2025-08-31 6.5 Medium
A NULL pointer dereference flaw was found in the GnuTLS software in _gnutls_figure_common_ciphersuite().
CVE-2025-5318 2 Libssh, Redhat 4 Libssh, Enterprise Linux, Openshift and 1 more 2025-08-31 5.4 Medium
A flaw was found in the libssh library. An out-of-bounds read can be triggered in the sftp_handle function due to an incorrect comparison check that permits the function to access memory beyond the valid handle list and to return an invalid pointer, which is used in further processing. This vulnerability allows an authenticated remote attacker to potentially read unintended memory regions, exposing sensitive information or affect service behavior.
CVE-2025-32990 2 Gnu, Redhat 4 Gnutls, Enterprise Linux, Openshift and 1 more 2025-08-31 6.5 Medium
A heap-buffer-overflow (off-by-one) flaw was found in the GnuTLS software in the template parsing logic within the certtool utility. When it reads certain settings from a template file, it allows an attacker to cause an out-of-bounds (OOB) NULL pointer write, resulting in memory corruption and a denial-of-service (DoS) that could potentially crash the system.
CVE-2025-32989 2 Gnu, Redhat 4 Gnutls, Enterprise Linux, Openshift and 1 more 2025-08-31 5.3 Medium
A heap-buffer-overread vulnerability was found in GnuTLS in how it handles the Certificate Transparency (CT) Signed Certificate Timestamp (SCT) extension during X.509 certificate parsing. This flaw allows a malicious user to create a certificate containing a malformed SCT extension (OID 1.3.6.1.4.1.11129.2.4.2) that contains sensitive data. This issue leads to the exposure of confidential information when GnuTLS verifies certificates from certain websites when the certificate (SCT) is not checked correctly.
CVE-2025-32988 2 Gnu, Redhat 4 Gnutls, Enterprise Linux, Openshift and 1 more 2025-08-31 6.5 Medium
A flaw was found in GnuTLS. A double-free vulnerability exists in GnuTLS due to incorrect ownership handling in the export logic of Subject Alternative Name (SAN) entries containing an otherName. If the type-id OID is invalid or malformed, GnuTLS will call asn1_delete_structure() on an ASN.1 node it does not own, leading to a double-free condition when the parent function or caller later attempts to free the same structure. This vulnerability can be triggered using only public GnuTLS APIs and may result in denial of service or memory corruption, depending on allocator behavior.
CVE-2025-7345 1 Redhat 7 Enterprise Linux, Rhel Aus, Rhel E4s and 4 more 2025-08-31 7.5 High
A flaw exists in gdk‑pixbuf within the gdk_pixbuf__jpeg_image_load_increment function (io-jpeg.c) and in glib’s g_base64_encode_step (glib/gbase64.c). When processing maliciously crafted JPEG images, a heap buffer overflow can occur during Base64 encoding, allowing out-of-bounds reads from heap memory, potentially causing application crashes or arbitrary code execution.
CVE-2024-50312 1 Redhat 2 Openshift, Openshift Container Platform 2025-08-31 5.3 Medium
A vulnerability was found in GraphQL due to improper access controls on the GraphQL introspection query. This flaw allows unauthorized users to retrieve a comprehensive list of available queries and mutations. Exposure to this flaw increases the attack surface, as it can facilitate the discovery of flaws or errors specific to the application's GraphQL implementation.
CVE-2024-0567 5 Debian, Fedoraproject, Gnu and 2 more 9 Debian Linux, Fedora, Gnutls and 6 more 2025-08-31 7.5 High
A vulnerability was found in GnuTLS, where a cockpit (which uses gnuTLS) rejects a certificate chain with distributed trust. This issue occurs when validating a certificate chain with cockpit-certificate-ensure. This flaw allows an unauthenticated, remote client or attacker to initiate a denial of service attack.
CVE-2025-25209 1 Redhat 1 Connectivity Link 2025-08-31 5.7 Medium
The AuthPolicy metadata on Red Hat Connectivity Link contains an object which stores secretes, however it assumes those secretes are already in the kuadrant-system instead of copying it to the referred namespace. This creates space for a malicious actor with a developer persona access to leak those secrets over HTTP connection, as long the attacker knows the name of the targeted secrets and those secrets are limited to one line only.
CVE-2025-25208 1 Redhat 1 Connectivity Link 2025-08-31 5.7 Medium
A Developer persona can bring down the Authorino service, preventing the evaluation of all AuthPolicies on the cluster
CVE-2025-25207 1 Redhat 1 Connectivity Link 2025-08-31 5.7 Medium
The Authorino service in the Red Hat Connectivity Link is the authorization service for zero trust API security. Authorino allows the users with developer persona to add callbacks to be executed to HTTP endpoints once the authorization process is completed. It was found that an attacker with developer persona access can add a large number of those callbacks to be executed by Authorino and as the authentication policy is enforced by a single instance of the service, this leada to a Denial of Service in Authorino while processing the post-authorization callbacks.
CVE-2025-23367 1 Redhat 7 Build Keycloak, Jboss Data Grid, Jboss Enterprise Application Platform and 4 more 2025-08-31 6.5 Medium
A flaw was found in the Wildfly Server Role Based Access Control (RBAC) provider. When authorization to control management operations is secured using the Role Based Access Control provider, a user without the required privileges can suspend or resume the server. A user with a Monitor or Auditor role is supposed to have only read access permissions and should not be able to suspend the server. The vulnerability is caused by the Suspend and Resume handlers not performing authorization checks to validate whether the current user has the required permissions to proceed with the action.
CVE-2025-23366 1 Redhat 3 Jboss Data Grid, Jboss Enterprise Application Platform, Jbosseapxp 2025-08-31 6.5 Medium
A flaw was found in the HAL Console in the Wildfly component, which does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output used as a web page that is served to other users. The attacker must be authenticated as a user that belongs to management groups “SuperUser”, “Admin”, or “Maintainer”.
CVE-2025-6196 2 Gnome, Redhat 2 Libgepub, Enterprise Linux 2025-08-31 5.5 Medium
A flaw was found in libgepub, a library used to read EPUB files. The software mishandles file size calculations when opening specially crafted EPUB files, leading to incorrect memory allocations. This issue causes the application to crash. Known affected usage includes desktop services like Tumbler, which may process malicious files automatically when browsing directories. While no direct remote attack vectors are confirmed, any application using libgepub to parse user-supplied EPUB content could be vulnerable to a denial of service.