ReportizFlow
Filtered by vendor
Subscriptions
Total
28 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43244 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kcm: fix zero-frag skb in frag_list on partial sendmsg error Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data) | frag_list-+--> tskb +-----------+ +----------+ | frags[0] | (empty! copy failed before filling) +----------+ For SOCK_SEQPACKET with partial data already copied, the error path saves this message via partial_message for later completion. For SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a subsequent zero-length write(fd, NULL, 0) completes the message and queues it to sk_write_queue. kcm_write_msgs() then walks the frag_list and hits: WARN_ON(!skb_shinfo(skb)->nr_frags) TCP has a similar pattern where skbs are enqueued before data copy and cleaned up on failure via tcp_remove_empty_skb(). KCM was missing the equivalent cleanup. Fix this by tracking the predecessor skb (frag_prev) when allocating a new frag_list entry. On error, if the tail skb has zero frags, use frag_prev to unlink and free it in O(1) without walking the singly-linked frag_list. frag_prev is safe to dereference because the entire message chain is only held locally (or in kcm->seq_skb) and is not added to sk_write_queue until MSG_EOR, so the send path cannot free it underneath us. Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log if the condition is somehow hit repeatedly. There are currently no KCM selftests in the kernel tree; a simple reproducer is available at [1]. [1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa | ||||
| CVE-2026-43204 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6asm: drop DSP responses for closed data streams 'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses after closing")' attempted to ignore DSP responses arriving after a stream had been closed. However, those responses were still handled, causing lockups. Fix this by unconditionally dropping all DSP responses associated with closed data streams. | ||||
| CVE-2025-71289 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle attr_set_size() errors when truncating files If attr_set_size() fails while truncating down, the error is silently ignored and the inode may be left in an inconsistent state. | ||||
| CVE-2026-43045 | 1 Linux | 1 Linux Kernel | 2026-05-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Fix error handling in mshv_region_pin The current error handling has two issues: First, pin_user_pages_fast() can return a short pin count (less than requested but greater than zero) when it cannot pin all requested pages. This is treated as success, leading to partially pinned regions being used, which causes memory corruption. Second, when an error occurs mid-loop, already pinned pages from the current batch are not properly accounted for before calling mshv_region_invalidate_pages(), causing a page reference leak. Treat short pins as errors and fix partial batch accounting before cleanup. | ||||
| CVE-2026-31409 | 1 Linux | 1 Linux Kernel | 2026-04-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset conn->binding on failed binding request When a multichannel SMB2_SESSION_SETUP request with SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true but never clears it on the error path. This leaves the connection in a binding state where all subsequent ksmbd_session_lookup_all() calls fall back to the global sessions table. This fix it by clearing conn->binding = false in the error path. | ||||
| CVE-2024-12086 | 8 Almalinux, Archlinux, Gentoo and 5 more | 10 Almalinux, Arch Linux, Linux and 7 more | 2026-04-24 | 6.1 Medium |
| A flaw was found in rsync. It could allow a server to enumerate the contents of an arbitrary file from the client's machine. This issue occurs when files are being copied from a client to a server. During this process, the rsync server will send checksums of local data to the client to compare with in order to determine what data needs to be sent to the server. By sending specially constructed checksum values for arbitrary files, an attacker may be able to reconstruct the data of those files byte-by-byte based on the responses from the client. | ||||
| CVE-2026-23317 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Return the correct value in vmw_translate_ptr functions Before the referenced fixes these functions used a lookup function that returned a pointer. This was changed to another lookup function that returned an error code with the pointer becoming an out parameter. The error path when the lookup failed was not changed to reflect this change and the code continued to return the PTR_ERR of the now uninitialized pointer. This could cause the vmw_translate_ptr functions to return success when they actually failed causing further uninitialized and OOB accesses. | ||||
| CVE-2026-31439 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap init error handling devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL. Fix the error check and also fix the error message. Use the error code from ERR_PTR() instead of the wrong value in ret. | ||||
| CVE-2025-0029 | 1 Amd | 2 Epyc 9005 Series Processors, Epyc Embedded 9005 Series Processors | 2026-04-15 | N/A |
| Improper handling of error condition during host-induced faults can allow a local high-privileged attack to selectively drop guest DMA writes, potentially resulting in a loss of SEV-SNP guest memory integrity | ||||
| CVE-2025-25204 | 1 Github | 1 Cli | 2026-04-15 | 6.3 Medium |
| `gh` is GitHub’s official command line tool. Starting in version 2.49.0 and prior to version 2.67.0, under certain conditions, a bug in GitHub's Artifact Attestation cli tool `gh attestation verify` causes it to return a zero exit status when no attestations are present. This behavior is incorrect: When no attestations are present, `gh attestation verify` should return a non-zero exit status code, thereby signaling verification failure. An attacker can abuse this flaw to, for example, deploy malicious artifacts in any system that uses `gh attestation verify`'s exit codes to gatekeep deployments. Users are advised to update `gh` to patched version `v2.67.0` as soon as possible. | ||||
| CVE-2024-49841 | 1 Qualcomm | 346 Aqt1000, Aqt1000 Firmware, Ar8035 and 343 more | 2026-02-26 | 7.8 High |
| Memory corruption during memory assignment to headless peripheral VM due to incorrect error code handling. | ||||
| CVE-2025-27039 | 1 Qualcomm | 19 Fastconnect 6900, Fastconnect 6900 Firmware, Fastconnect 7800 and 16 more | 2026-02-26 | 6.6 Medium |
| Memory corruption may occur while processing IOCTL call for DMM/WARPNCC CONFIG request. | ||||
| CVE-2025-46367 | 1 Dell | 1 Alienware Command Center | 2026-02-26 | 7.8 High |
| Dell Alienware Command Center 6.x (AWCC), versions prior to 6.10.15.0, contain a Detection of Error Condition Without Action vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Arbitrary Code Execution. | ||||
| CVE-2025-26465 | 4 Debian, Netapp, Openbsd and 1 more | 9 Debian Linux, Active Iq Unified Manager, Ontap and 6 more | 2026-01-29 | 6.8 Medium |
| A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high. | ||||
| CVE-2024-30255 | 2 Envoyproxy, Redhat | 3 Envoy, Rhmt, Service Mesh | 2025-11-04 | 5.3 Medium |
| Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the END_HEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections. | ||||
| CVE-2024-28182 | 4 Debian, Fedoraproject, Nghttp2 and 1 more | 9 Debian Linux, Fedora, Nghttp2 and 6 more | 2025-11-04 | 5.3 Medium |
| nghttp2 is an implementation of the Hypertext Transfer Protocol version 2 in C. The nghttp2 library prior to version 1.61.0 keeps reading the unbounded number of HTTP/2 CONTINUATION frames even after a stream is reset to keep HPACK context in sync. This causes excessive CPU usage to decode HPACK stream. nghttp2 v1.61.0 mitigates this vulnerability by limiting the number of CONTINUATION frames it accepts per stream. There is no workaround for this vulnerability. | ||||
| CVE-2024-27919 | 1 Envoyproxy | 1 Envoy | 2025-11-04 | 7.5 High |
| Envoy is a cloud-native, open-source edge and service proxy. In versions 1.29.0 and 1.29.1, theEnvoy HTTP/2 protocol stack is vulnerable to the flood of CONTINUATION frames. Envoy's HTTP/2 codec does not reset a request when header map limits have been exceeded. This allows an attacker to send an sequence of CONTINUATION frames without the END_HEADERS bit set causing unlimited memory consumption. This can lead to denial of service through memory exhaustion. Users should upgrade to versions 1.29.2 to mitigate the effects of the CONTINUATION flood. Note that this vulnerability is a regression in Envoy version 1.29.0 and 1.29.1 only. As a workaround, downgrade to version 1.28.1 or earlier or disable HTTP/2 protocol for downstream connections. | ||||
| CVE-2024-50284 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix the missing xa_store error check xa_store() can fail, it return xa_err(-EINVAL) if the entry cannot be stored in an XArray, or xa_err(-ENOMEM) if memory allocation failed, so check error for xa_store() to fix it. | ||||
| CVE-2024-20316 | 1 Cisco | 1 Ios Xe | 2025-07-30 | 5.8 Medium |
| A vulnerability in the data model interface (DMI) services of Cisco IOS XE Software could allow an unauthenticated, remote attacker to access resources that should have been protected by a configured IPv4 access control list (ACL). This vulnerability is due to improper handling of error conditions when a successfully authorized device administrator updates an IPv4 ACL using the NETCONF or RESTCONF protocol, and the update would reorder access control entries (ACEs) in the updated ACL. An attacker could exploit this vulnerability by accessing resources that should have been protected across an affected device. | ||||
| CVE-2024-11942 | 1 Drupal | 2 Drupal, Drupal Core | 2025-06-02 | 5.9 Medium |
| A vulnerability in Drupal Core allows File Manipulation.This issue affects Drupal Core: from 10.0.0 before 10.2.10. | ||||