ReportizFlow
Filtered by vendor
Subscriptions
Total
7496 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-49991 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer Pass pointer reference to amdgpu_bo_unref to clear the correct pointer, otherwise amdgpu_bo_unref clear the local variable, the original pointer not set to NULL, this could cause use-after-free bug. | ||||
| CVE-2024-49986 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors x86_android_tablet_remove() frees the pdevs[] array, so it should not be used after calling x86_android_tablet_remove(). When platform_device_register() fails, store the pdevs[x] PTR_ERR() value into the local ret variable before calling x86_android_tablet_remove() to avoid using pdevs[] after it has been freed. | ||||
| CVE-2024-49982 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue. | ||||
| CVE-2024-49981 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free bug in venus_remove due to race condition in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. | ||||
| CVE-2024-49966 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: cancel dqi_sync_work before freeing oinfo ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the end, if error occurs after successfully reading global quota, it will trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled: ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c This reports that there is an active delayed work when freeing oinfo in error handling, so cancel dqi_sync_work first. BTW, return status instead of -1 when .read_file_info fails. | ||||
| CVE-2024-49960 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix timer use-after-free on failed mount Syzbot has found an ODEBUG bug in ext4_fill_super The del_timer_sync function cancels the s_err_report timer, which reminds about filesystem errors daily. We should guarantee the timer is no longer active before kfree(sbi). When filesystem mounting fails, the flow goes to failed_mount3, where an error occurs when ext4_stop_mmpd is called, causing a read I/O failure. This triggers the ext4_handle_error function that ultimately re-arms the timer, leaving the s_err_report timer active before kfree(sbi) is called. Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd. | ||||
| CVE-2024-49950 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix uaf in l2cap_connect [Syzbot reported] BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54 CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci2 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline] l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825 l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514 hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline] hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 ... Freed by task 5245: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object+0xf7/0x160 mm/kasan/common.c:240 __kasan_slab_free+0x32/0x50 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x12a/0x3b0 mm/slub.c:4598 l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline] l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802 l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241 hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline] hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265 hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583 abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917 hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 | ||||
| CVE-2024-49936 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/xen-netback: prevent UAF in xenvif_flush_hash() During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe. | ||||
| CVE-2024-49855 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nbd: fix race between timeout and normal completion If request timetout is handled by nbd_requeue_cmd(), normal completion has to be stopped for avoiding to complete this requeued request, other use-after-free can be triggered. Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime make sure that cmd->lock is grabbed for clearing the flag and the requeue. | ||||
| CVE-2024-49854 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for accessing waker_bfqq after splitting After commit 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()"), if the current procress is the last holder of bfqq, the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq may in the merge chain of bfqq, hence just recored waker_bfqq is still not safe. Fix the problem by adding a helper bfq_waker_bfqq() to check if bfqq->waker_bfqq is in the merge chain, and current procress is the only holder. | ||||
| CVE-2024-49852 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: elx: libefc: Fix potential use after free in efc_nport_vport_del() The kref_put() function will call nport->release if the refcount drops to zero. The nport->release release function is _efc_nport_free() which frees "nport". But then we dereference "nport" on the next line which is a use after free. Re-order these lines to avoid the use after free. | ||||
| CVE-2024-47750 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix Use-After-Free of rsv_qp on HIP08 Currently rsv_qp is freed before ib_unregister_device() is called on HIP08. During the time interval, users can still dereg MR and rsv_qp will be used in this process, leading to a UAF. Move the release of rsv_qp after calling ib_unregister_device() to fix it. | ||||
| CVE-2024-47748 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost_vdpa: assign irq bypass producer token correctly We used to call irq_bypass_unregister_producer() in vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the token pointer is still valid or not. Actually, we use the eventfd_ctx as the token so the life cycle of the token should be bound to the VHOST_SET_VRING_CALL instead of vhost_vdpa_setup_vq_irq() which could be called by set_status(). Fixing this by setting up irq bypass producer's token when handling VHOST_SET_VRING_CALL and un-registering the producer before calling vhost_vring_ioctl() to prevent a possible use after free as eventfd could have been released in vhost_vring_ioctl(). And such registering and unregistering will only be done if DRIVER_OK is set. | ||||
| CVE-2024-46846 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: rockchip: Resolve unbalanced runtime PM / system PM handling Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and simply disabled clocks unconditionally when suspending the system. This causes problems when the device is already runtime suspended when we go to sleep -- in which case we double-disable clocks and produce a WARNing. Switch back to pm_runtime_force_{suspend,resume}(), because that still seems like the right thing to do, and the aforementioned commit makes no explanation why it stopped using it. Also, refactor some of the resume() error handling, because it's not actually a good idea to re-disable clocks on failure. | ||||
| CVE-2024-46800 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sch/netem: fix use after free in netem_dequeue If netem_dequeue() enqueues packet to inner qdisc and that qdisc returns __NET_XMIT_STOLEN. The packet is dropped but qdisc_tree_reduce_backlog() is not called to update the parent's q.qlen, leading to the similar use-after-free as Commit e04991a48dbaf382 ("netem: fix return value if duplicate enqueue fails") Commands to trigger KASAN UaF: ip link add type dummy ip link set lo up ip link set dummy0 up tc qdisc add dev lo parent root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2: handle 3: drr tc filter add dev lo parent 3: basic classid 3:1 action mirred egress redirect dev dummy0 tc class add dev lo classid 3:1 drr ping -c1 -W0.01 localhost # Trigger bug tc class del dev lo classid 1:1 tc class add dev lo classid 1:1 drr ping -c1 -W0.01 localhost # UaF | ||||
| CVE-2024-46798 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object When using kernel with the following extra config, - CONFIG_KASAN=y - CONFIG_KASAN_GENERIC=y - CONFIG_KASAN_INLINE=y - CONFIG_KASAN_VMALLOC=y - CONFIG_FRAME_WARN=4096 kernel detects that snd_pcm_suspend_all() access a freed 'snd_soc_pcm_runtime' object when the system is suspended, which leads to a use-after-free bug: [ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270 [ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330 [ 52.047785] Call trace: [ 52.047787] dump_backtrace+0x0/0x3c0 [ 52.047794] show_stack+0x34/0x50 [ 52.047797] dump_stack_lvl+0x68/0x8c [ 52.047802] print_address_description.constprop.0+0x74/0x2c0 [ 52.047809] kasan_report+0x210/0x230 [ 52.047815] __asan_report_load1_noabort+0x3c/0x50 [ 52.047820] snd_pcm_suspend_all+0x1a8/0x270 [ 52.047824] snd_soc_suspend+0x19c/0x4e0 The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before making any access. So we need to always set 'substream->runtime' to NULL everytime we kfree() it. | ||||
| CVE-2024-46782 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ila: call nf_unregister_net_hooks() sooner syzbot found an use-after-free Read in ila_nf_input [1] Issue here is that ila_xlat_exit_net() frees the rhashtable, then call nf_unregister_net_hooks(). It should be done in the reverse way, with a synchronize_rcu(). This is a good match for a pre_exit() method. [1] BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline] BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline] BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16 CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline] ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline] ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:928 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: 0xbfffffff(buddy) raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000 raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493 prep_new_page mm/page_alloc.c:1501 [inline] get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103 __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130 __do_kmalloc_node mm/slub.c:4146 [inline] __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164 __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071 ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613 ops_ini ---truncated--- | ||||
| CVE-2024-46781 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix missing cleanup on rollforward recovery error In an error injection test of a routine for mount-time recovery, KASAN found a use-after-free bug. It turned out that if data recovery was performed using partial logs created by dsync writes, but an error occurred before starting the log writer to create a recovered checkpoint, the inodes whose data had been recovered were left in the ns_dirty_files list of the nilfs object and were not freed. Fix this issue by cleaning up inodes that have read the recovery data if the recovery routine fails midway before the log writer starts. | ||||
| CVE-2024-46771 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: Remove proc entry when dev is unregistered. syzkaller reported a warning in bcm_connect() below. [0] The repro calls connect() to vxcan1, removes vxcan1, and calls connect() with ifindex == 0. Calling connect() for a BCM socket allocates a proc entry. Then, bcm_sk(sk)->bound is set to 1 to prevent further connect(). However, removing the bound device resets bcm_sk(sk)->bound to 0 in bcm_notify(). The 2nd connect() tries to allocate a proc entry with the same name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the original proc entry. Since the proc entry is available only for connect()ed sockets, let's clean up the entry when the bound netdev is unregistered. [0]: proc_dir_entry 'can-bcm/2456' already registered WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375 Modules linked in: CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375 Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48 RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246 RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0 R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220 bcm_connect+0x472/0x840 net/can/bcm.c:1673 __sys_connect_file net/socket.c:2049 [inline] __sys_connect+0x5d2/0x690 net/socket.c:2066 __do_sys_connect net/socket.c:2076 [inline] __se_sys_connect net/socket.c:2073 [inline] __x64_sys_connect+0x8f/0x100 net/socket.c:2073 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fbd708b0e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040 R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098 R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000 </TASK> remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456' | ||||
| CVE-2024-46740 | 1 Linux | 1 Linux Kernel | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF caused by offsets overwrite Binder objects are processed and copied individually into the target buffer during transactions. Any raw data in-between these objects is copied as well. However, this raw data copy lacks an out-of-bounds check. If the raw data exceeds the data section size then the copy overwrites the offsets section. This eventually triggers an error that attempts to unwind the processed objects. However, at this point the offsets used to index these objects are now corrupted. Unwinding with corrupted offsets can result in decrements of arbitrary nodes and lead to their premature release. Other users of such nodes are left with a dangling pointer triggering a use-after-free. This issue is made evident by the following KASAN report (trimmed): ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff47fc91598f04 by task binder-util/743 CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_free_buf+0x128/0x434 binder_thread_write+0x8a4/0x3260 binder_ioctl+0x18f0/0x258c [...] Allocated by task 743: __kmalloc_cache_noprof+0x110/0x270 binder_new_node+0x50/0x700 binder_transaction+0x413c/0x6da8 binder_thread_write+0x978/0x3260 binder_ioctl+0x18f0/0x258c [...] Freed by task 745: kfree+0xbc/0x208 binder_thread_read+0x1c5c/0x37d4 binder_ioctl+0x16d8/0x258c [...] ================================================================== To avoid this issue, let's check that the raw data copy is within the boundaries of the data section. | ||||