ReportizFlow
Filtered by vendor
Subscriptions
Total
3299 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49197 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_netlink: Fix shift out of bounds in group mask calculation When a netlink message is received, netlink_recvmsg() fills in the address of the sender. One of the fields is the 32-bit bitfield nl_groups, which carries the multicast group on which the message was received. The least significant bit corresponds to group 1, and therefore the highest group that the field can represent is 32. Above that, the UB sanitizer flags the out-of-bounds shift attempts. Which bits end up being set in such case is implementation defined, but it's either going to be a wrong non-zero value, or zero, which is at least not misleading. Make the latter choice deterministic by always setting to 0 for higher-numbered multicast groups. To get information about membership in groups >= 32, userspace is expected to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO socket option. [0] https://lwn.net/Articles/147608/ The way to trigger this issue is e.g. through monitoring the BRVLAN group: # bridge monitor vlan & # ip link add name br type bridge Which produces the following citation: UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19 shift exponent 32 is too large for 32-bit type 'int' | ||||
| CVE-2022-49222 | 1 Linux | 1 Linux Kernel | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: anx7625: Fix overflow issue on reading EDID The length of EDID block can be longer than 256 bytes, so we should use `int` instead of `u8` for the `edid_pos` variable. | ||||
| CVE-2025-7985 | 1 Ashlar | 1 Cobalt | 2025-09-22 | N/A |
| Ashlar-Vellum Cobalt VC6 File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Ashlar-Vellum Cobalt. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of VC6 files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-25704. | ||||
| CVE-2025-7982 | 1 Ashlar | 1 Cobalt | 2025-09-22 | N/A |
| Ashlar-Vellum Cobalt LI File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Ashlar-Vellum Cobalt. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of LI files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-25476. | ||||
| CVE-2022-49320 | 1 Linux | 1 Linux Kernel | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: zynqmp_dma: In struct zynqmp_dma_chan fix desc_size data type In zynqmp_dma_alloc/free_chan_resources functions there is a potential overflow in the below expressions. dma_alloc_coherent(chan->dev, (2 * chan->desc_size * ZYNQMP_DMA_NUM_DESCS), &chan->desc_pool_p, GFP_KERNEL); dma_free_coherent(chan->dev,(2 * ZYNQMP_DMA_DESC_SIZE(chan) * ZYNQMP_DMA_NUM_DESCS), chan->desc_pool_v, chan->desc_pool_p); The arguments desc_size and ZYNQMP_DMA_NUM_DESCS were 32 bit. Though this overflow condition is not observed but it is a potential problem in the case of 32-bit multiplication. Hence fix it by changing the desc_size data type to size_t. In addition to coverity fix it also reuse ZYNQMP_DMA_DESC_SIZE macro in dma_alloc_coherent API argument. Addresses-Coverity: Event overflow_before_widen. | ||||
| CVE-2022-49289 | 1 Linux | 1 Linux Kernel | 2025-09-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: uaccess: fix integer overflow on access_ok() Three architectures check the end of a user access against the address limit without taking a possible overflow into account. Passing a negative length or another overflow in here returns success when it should not. Use the most common correct implementation here, which optimizes for a constant 'size' argument, and turns the common case into a single comparison. | ||||
| CVE-2024-53880 | 3 Linux, Microsoft, Nvidia | 3 Linux Kernel, Windows, Triton Inference Server | 2025-09-22 | 4.9 Medium |
| NVIDIA Triton Inference Server contains a vulnerability in the model loading API, where a user could cause an integer overflow or wraparound error by loading a model with an extra-large file size that overflows an internal variable. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2025-58749 | 1 Bytecodealliance | 1 Webassembly Micro Runtime | 2025-09-20 | 5.3 Medium |
| WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. In WAMR versions prior to 2.4.2, when running in LLVM-JIT mode, the runtime cannot exit normally when executing WebAssembly programs containing a memory.fill instruction where the first operand (memory address pointer) is greater than or equal to 2147483648 bytes (2GiB). This causes the runtime to hang in release builds or crash in debug builds due to accessing an invalid pointer. The issue does not occur in FAST-JIT mode or other runtime tools. This has been fixed in version 2.4.2. | ||||
| CVE-2025-10533 | 2 Mozilla, Redhat | 4 Firefox, Firefox Esr, Thunderbird and 1 more | 2025-09-19 | 8.8 High |
| This vulnerability affects Firefox < 143, Firefox ESR < 115.28, Firefox ESR < 140.3, Thunderbird < 143, and Thunderbird < 140.3. | ||||
| CVE-2025-55068 | 1 Doverfuelingsolutions | 1 Progauge Maglink Lx Console | 2025-09-19 | 8.2 High |
| Dover Fueling Solutions ProGauge MagLink LX4 Devices fail to handle Unix time values beyond a certain point. An attacker can manually change the system time to exploit this limitation, potentially causing errors in authentication and leading to a denial-of-service condition. | ||||
| CVE-2022-48665 | 1 Linux | 1 Linux Kernel | 2025-09-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix overflow for large capacity partition Using int type for sector index, there will be overflow in a large capacity partition. For example, if storage with sector size of 512 bytes and partition capacity is larger than 2TB, there will be overflow. | ||||
| CVE-2025-23016 | 1 Fastcgi | 1 Fcgi | 2025-09-19 | 9.3 Critical |
| FastCGI fcgi2 (aka fcgi) 2.x through 2.4.4 has an integer overflow (and resultant heap-based buffer overflow) via crafted nameLen or valueLen values in data to the IPC socket. This occurs in ReadParams in fcgiapp.c. | ||||
| CVE-2024-36918 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check bloom filter map value size This patch adds a missing check to bloom filter creating, rejecting values above KMALLOC_MAX_SIZE. This brings the bloom map in line with many other map types. The lack of this protection can cause kernel crashes for value sizes that overflow int's. Such a crash was caught by syzkaller. The next patch adds more guard-rails at a lower level. | ||||
| CVE-2024-36917 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix overflow in blk_ioctl_discard() There is no check for overflow of 'start + len' in blk_ioctl_discard(). Hung task occurs if submit an discard ioctl with the following param: start = 0x80000000000ff000, len = 0x8000000000fff000; Add the overflow validation now. | ||||
| CVE-2024-37356 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). In dctcp_update_alpha(), we use a module parameter dctcp_shift_g as follows: alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g); ... delivered_ce <<= (10 - dctcp_shift_g); It seems syzkaller started fuzzing module parameters and triggered shift-out-of-bounds [0] by setting 100 to dctcp_shift_g: memcpy((void*)0x20000080, "/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47); res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul, /*flags=*/2ul, /*mode=*/0ul); memcpy((void*)0x20000000, "100\000", 4); syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul); Let's limit the max value of dctcp_shift_g by param_set_uint_minmax(). With this patch: # echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g # cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g 10 # echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g -bash: echo: write error: Invalid argument [0]: UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12 shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468 dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143 tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline] tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948 tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711 tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937 sk_backlog_rcv include/net/sock.h:1106 [inline] __release_sock+0x20f/0x350 net/core/sock.c:2983 release_sock+0x61/0x1f0 net/core/sock.c:3549 mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907 mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976 __mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072 mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127 inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:659 [inline] sock_close+0xc0/0x240 net/socket.c:1421 __fput+0x41b/0x890 fs/file_table.c:422 task_work_run+0x23b/0x300 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x9c8/0x2540 kernel/exit.c:878 do_group_exit+0x201/0x2b0 kernel/exit.c:1027 __do_sys_exit_group kernel/exit.c:1038 [inline] __se_sys_exit_group kernel/exit.c:1036 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f6c2b5005b6 Code: Unable to access opcode bytes at 0x7f6c2b50058c. RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6 RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> | ||||
| CVE-2024-26817 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-09-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: amdkfd: use calloc instead of kzalloc to avoid integer overflow This uses calloc instead of doing the multiplication which might overflow. | ||||
| CVE-2025-6035 | 2 Gimp, Redhat | 2 Gimp, Enterprise Linux | 2025-09-12 | 6.6 Medium |
| A flaw was found in GIMP. An integer overflow vulnerability exists in the GIMP "Despeckle" plug-in. The issue occurs due to unchecked multiplication of image dimensions, such as width, height, and bytes-per-pixel (img_bpp), which can result in allocating insufficient memory and subsequently performing out-of-bounds writes. This issue could lead to heap corruption, a potential denial of service (DoS), or arbitrary code execution in certain scenarios. | ||||
| CVE-2025-54259 | 1 Adobe | 1 Substance 3d Modeler | 2025-09-12 | 7.8 High |
| Substance3D - Modeler versions 1.22.2 and earlier are affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. Scope is unchanged. | ||||
| CVE-2025-21338 | 1 Microsoft | 16 Office, Windows 10 1507, Windows 10 1607 and 13 more | 2025-09-10 | 7.8 High |
| GDI+ Remote Code Execution Vulnerability | ||||
| CVE-2025-21172 | 4 Apple, Linux, Microsoft and 1 more | 9 Macos, Linux Kernel, .net and 6 more | 2025-09-10 | 7.5 High |
| .NET and Visual Studio Remote Code Execution Vulnerability | ||||