Filtered by CWE-416
Filtered by vendor Subscriptions
Total 7446 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2023-53636 1 Linux 1 Linux Kernel 2026-02-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: clk: microchip: fix potential UAF in auxdev release callback Similar to commit 1c11289b34ab ("peci: cpu: Fix use-after-free in adev_release()"), the auxiliary device is not torn down in the correct order. If auxiliary_device_add() fails, the release callback will be called twice, resulting in a UAF. Due to timing, the auxdev code in this driver "took inspiration" from the aforementioned commit, and thus its bugs too! Moving auxiliary_device_uninit() to the unregister callback instead avoids the issue.
CVE-2023-53638 1 Linux 1 Linux Kernel 2026-02-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: octeon_ep: cancel queued works in probe error path If it fails to get the devices's MAC address, octep_probe exits while leaving the delayed work intr_poll_task queued. When the work later runs, it's a use after free. Move the cancelation of intr_poll_task from octep_remove into octep_device_cleanup. This does not change anything in the octep_remove flow, but octep_device_cleanup is called also in the octep_probe error path, where the cancelation is needed. Note that the cancelation of ctrl_mbox_task has to follow intr_poll_task's, because the ctrl_mbox_task may be queued by intr_poll_task.
CVE-2023-53640 1 Linux 1 Linux Kernel 2026-02-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: ASoC: lpass: Fix for KASAN use_after_free out of bounds When we run syzkaller we get below Out of Bounds error. "KASAN: slab-out-of-bounds Read in regcache_flat_read" Below is the backtrace of the issue: BUG: KASAN: slab-out-of-bounds in regcache_flat_read+0x10c/0x110 Read of size 4 at addr ffffff8088fbf714 by task syz-executor.4/14144 CPU: 6 PID: 14144 Comm: syz-executor.4 Tainted: G W Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT) Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c print_address_description+0x30/0x2d8 kasan_report+0x178/0x1e4 __asan_report_load4_noabort+0x44/0x50 regcache_flat_read+0x10c/0x110 regcache_read+0xf8/0x5a0 _regmap_read+0x45c/0x86c _regmap_update_bits+0x128/0x290 regmap_update_bits_base+0xc0/0x15c snd_soc_component_update_bits+0xa8/0x22c snd_soc_component_write_field+0x68/0xd4 tx_macro_put_dec_enum+0x1d0/0x268 snd_ctl_elem_write+0x288/0x474 By Error checking and checking valid values issue gets rectifies.
CVE-2023-53645 1 Linux 1 Linux Kernel 2026-02-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: bpf: Make bpf_refcount_acquire fallible for non-owning refs This patch fixes an incorrect assumption made in the original bpf_refcount series [0], specifically that the BPF program calling bpf_refcount_acquire on some node can always guarantee that the node is alive. In that series, the patch adding failure behavior to rbtree_add and list_push_{front, back} breaks this assumption for non-owning references. Consider the following program: n = bpf_kptr_xchg(&mapval, NULL); /* skip error checking */ bpf_spin_lock(&l); if(bpf_rbtree_add(&t, &n->rb, less)) { bpf_refcount_acquire(n); /* Failed to add, do something else with the node */ } bpf_spin_unlock(&l); It's incorrect to assume that bpf_refcount_acquire will always succeed in this scenario. bpf_refcount_acquire is being called in a critical section here, but the lock being held is associated with rbtree t, which isn't necessarily the lock associated with the tree that the node is already in. So after bpf_rbtree_add fails to add the node and calls bpf_obj_drop in it, the program has no ownership of the node's lifetime. Therefore the node's refcount can be decr'd to 0 at any time after the failing rbtree_add. If this happens before the refcount_acquire above, the node might be free'd, and regardless refcount_acquire will be incrementing a 0 refcount. Later patches in the series exercise this scenario, resulting in the expected complaint from the kernel (without this patch's changes): refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 207 at lib/refcount.c:25 refcount_warn_saturate+0xbc/0x110 Modules linked in: bpf_testmod(O) CPU: 1 PID: 207 Comm: test_progs Tainted: G O 6.3.0-rc7-02231-g723de1a718a2-dirty #371 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0xbc/0x110 Code: 6f 64 f6 02 01 e8 84 a3 5c ff 0f 0b eb 9d 80 3d 5e 64 f6 02 00 75 94 48 c7 c7 e0 13 d2 82 c6 05 4e 64 f6 02 01 e8 64 a3 5c ff <0f> 0b e9 7a ff ff ff 80 3d 38 64 f6 02 00 0f 85 6d ff ff ff 48 c7 RSP: 0018:ffff88810b9179b0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000202 RSI: 0000000000000008 RDI: ffffffff857c3680 RBP: ffff88810027d3c0 R08: ffffffff8125f2a4 R09: ffff88810b9176e7 R10: ffffed1021722edc R11: 746e756f63666572 R12: ffff88810027d388 R13: ffff88810027d3c0 R14: ffffc900005fe030 R15: ffffc900005fe048 FS: 00007fee0584a700(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005634a96f6c58 CR3: 0000000108ce9002 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> bpf_refcount_acquire_impl+0xb5/0xc0 (rest of output snipped) The patch addresses this by changing bpf_refcount_acquire_impl to use refcount_inc_not_zero instead of refcount_inc and marking bpf_refcount_acquire KF_RET_NULL. For owning references, though, we know the above scenario is not possible and thus that bpf_refcount_acquire will always succeed. Some verifier bookkeeping is added to track "is input owning ref?" for bpf_refcount_acquire calls and return false from is_kfunc_ret_null for bpf_refcount_acquire on owning refs despite it being marked KF_RET_NULL. Existing selftests using bpf_refcount_acquire are modified where necessary to NULL-check its return value. [0]: https://lore.kernel.org/bpf/[email protected]/
CVE-2023-53629 1 Linux 1 Linux Kernel 2026-02-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: fs: dlm: fix use after free in midcomms commit While working on processing dlm message in softirq context I experienced the following KASAN use-after-free warning: [ 151.760477] ================================================================== [ 151.761803] BUG: KASAN: use-after-free in dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.763414] Read of size 4 at addr ffff88811a980c60 by task lock_torture/1347 [ 151.765284] CPU: 7 PID: 1347 Comm: lock_torture Not tainted 6.1.0-rc4+ #2828 [ 151.766778] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+16134+e5908aa2 04/01/2014 [ 151.768726] Call Trace: [ 151.769277] <TASK> [ 151.769748] dump_stack_lvl+0x5b/0x86 [ 151.770556] print_report+0x180/0x4c8 [ 151.771378] ? kasan_complete_mode_report_info+0x7c/0x1e0 [ 151.772241] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.773069] kasan_report+0x93/0x1a0 [ 151.773668] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.774514] __asan_load4+0x7e/0xa0 [ 151.775089] dlm_midcomms_commit_mhandle+0x19d/0x4b0 [ 151.775890] ? create_message.isra.29.constprop.64+0x57/0xc0 [ 151.776770] send_common+0x19f/0x1b0 [ 151.777342] ? remove_from_waiters+0x60/0x60 [ 151.778017] ? lock_downgrade+0x410/0x410 [ 151.778648] ? __this_cpu_preempt_check+0x13/0x20 [ 151.779421] ? rcu_lockdep_current_cpu_online+0x88/0xc0 [ 151.780292] _convert_lock+0x46/0x150 [ 151.780893] convert_lock+0x7b/0xc0 [ 151.781459] dlm_lock+0x3ac/0x580 [ 151.781993] ? 0xffffffffc0540000 [ 151.782522] ? torture_stop+0x120/0x120 [dlm_locktorture] [ 151.783379] ? dlm_scan_rsbs+0xa70/0xa70 [ 151.784003] ? preempt_count_sub+0xd6/0x130 [ 151.784661] ? is_module_address+0x47/0x70 [ 151.785309] ? torture_stop+0x120/0x120 [dlm_locktorture] [ 151.786166] ? 0xffffffffc0540000 [ 151.786693] ? lockdep_init_map_type+0xc3/0x360 [ 151.787414] ? 0xffffffffc0540000 [ 151.787947] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture] [ 151.789004] ? torture_stop+0x120/0x120 [dlm_locktorture] [ 151.789858] ? 0xffffffffc0540000 [ 151.790392] ? lock_torture_cleanup+0x20/0x20 [dlm_locktorture] [ 151.791347] ? delay_tsc+0x94/0xc0 [ 151.791898] torture_ex_iter+0xc3/0xea [dlm_locktorture] [ 151.792735] ? torture_start+0x30/0x30 [dlm_locktorture] [ 151.793606] lock_torture+0x177/0x270 [dlm_locktorture] [ 151.794448] ? torture_dlm_lock_sync.isra.3+0x150/0x150 [dlm_locktorture] [ 151.795539] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 151.796476] ? do_raw_spin_lock+0x11e/0x1e0 [ 151.797152] ? mark_held_locks+0x34/0xb0 [ 151.797784] ? _raw_spin_unlock_irqrestore+0x30/0x70 [ 151.798581] ? __kthread_parkme+0x79/0x110 [ 151.799246] ? trace_preempt_on+0x2a/0xf0 [ 151.799902] ? __kthread_parkme+0x79/0x110 [ 151.800579] ? preempt_count_sub+0xd6/0x130 [ 151.801271] ? __kasan_check_read+0x11/0x20 [ 151.801963] ? __kthread_parkme+0xec/0x110 [ 151.802630] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 151.803569] kthread+0x192/0x1d0 [ 151.804104] ? kthread_complete_and_exit+0x30/0x30 [ 151.804881] ret_from_fork+0x1f/0x30 [ 151.805480] </TASK> [ 151.806111] Allocated by task 1347: [ 151.806681] kasan_save_stack+0x26/0x50 [ 151.807308] kasan_set_track+0x25/0x30 [ 151.807920] kasan_save_alloc_info+0x1e/0x30 [ 151.808609] __kasan_slab_alloc+0x63/0x80 [ 151.809263] kmem_cache_alloc+0x1ad/0x830 [ 151.809916] dlm_allocate_mhandle+0x17/0x20 [ 151.810590] dlm_midcomms_get_mhandle+0x96/0x260 [ 151.811344] _create_message+0x95/0x180 [ 151.811994] create_message.isra.29.constprop.64+0x57/0xc0 [ 151.812880] send_common+0x129/0x1b0 [ 151.813467] _convert_lock+0x46/0x150 [ 151.814074] convert_lock+0x7b/0xc0 [ 151.814648] dlm_lock+0x3ac/0x580 [ 151.815199] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture] [ 151.816258] torture_ex_iter+0xc3/0xea [dlm_locktorture] [ 151.817129] lock_t ---truncated---
CVE-2025-62408 1 C-ares 1 C-ares 2026-02-02 5.9 Medium
c-ares is an asynchronous resolver library. Versions 1.32.3 through 1.34.5 terminate a query after maximum attempts when using read_answer() and process_answer(), which can cause a Denial of Service. This issue is fixed in version 1.34.6.
CVE-2025-48752 1 Forestryks 1 Process-sync 2026-01-31 2.9 Low
In the process-sync crate 0.2.2 for Rust, the drop function lacks a check for whether the pthread_mutex is unlocked.
CVE-2025-59946 1 Emqx 1 Nanomq 2026-01-31 7.5 High
NanoMQ MQTT Broker (NanoMQ) is an Edge Messaging Platform. Prior to version 0.24.2, there is a classical data racing issue about sub info list which could result in heap use after free crash. This issue has been patched in version 0.24.2.
CVE-2025-10865 1 Imaginationtech 2 Ddk, Graphics Ddk 2026-01-30 7.8 High
Software installed and run as a non-privileged user may conduct improper GPU system calls to cause mismanagement of reference counting to cause a potential use after free. Improper reference counting on an internal resource caused scenario where potential for use after free was present.
CVE-2025-58411 1 Imaginationtech 2 Ddk, Graphics Ddk 2026-01-30 8.8 High
Software installed and run as a non-privileged user may conduct improper GPU system calls to cause mismanagement of resources reference counting creating a potential use after free scenario. Improper resource management and reference counting on an internal resource caused scenario where potential write use after free was present.
CVE-2025-13952 1 Imaginationtech 2 Ddk, Graphics Ddk 2026-01-28 9.8 Critical
A web page that contains unusual GPU shader code is loaded from the Internet into the GPU compiler process triggers a write use-after-free crash in the GPU shader compiler library. On certain platforms, when the compiler process has system privileges this could enable further exploits on the device. The shader code contained in the web page executes a path in the compiler that held onto an out of date pointer, pointing to a freed memory object.
CVE-2025-27063 1 Qualcomm 223 Csra6620, Csra6620 Firmware, Csra6640 and 220 more 2026-01-28 7.8 High
Memory corruption during video playback when video session open fails with time out error.
CVE-2025-47322 1 Qualcomm 223 Ar8031, Ar8031 Firmware, Ar8035 and 220 more 2026-01-28 7.8 High
Memory corruption while handling IOCTL calls to set mode.
CVE-2025-47333 1 Qualcomm 479 Aqt1000, Aqt1000 Firmware, Ar8031 and 476 more 2026-01-28 6.6 Medium
Memory corruption while handling buffer mapping operations in the cryptographic driver.
CVE-2025-47336 1 Qualcomm 37 Fastconnect 7800, Fastconnect 7800 Firmware, Qmp1000 and 34 more 2026-01-28 6.7 Medium
Memory corruption while performing sensor register read operations.
CVE-2025-47337 1 Qualcomm 129 Fastconnect 6700, Fastconnect 6700 Firmware, Fastconnect 6900 and 126 more 2026-01-28 6.7 Medium
Memory corruption while accessing a synchronization object during concurrent operations.
CVE-2025-47339 1 Qualcomm 371 Ar8035, Ar8035 Firmware, Ar9380 and 368 more 2026-01-28 7.8 High
Memory corruption while deinitializing a HDCP session.
CVE-2023-3019 2 Qemu, Redhat 4 Qemu, Advanced Virtualization, Enterprise Linux and 1 more 2026-01-27 6 Medium
A DMA reentrancy issue leading to a use-after-free error was found in the e1000e NIC emulation code in QEMU. This issue could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
CVE-2022-0699 1 Osgeo 1 Shapelib 2026-01-25 9.8 Critical
A double-free condition exists in contrib/shpsort.c of shapelib 1.5.0 and older releases. This issue may allow an attacker to cause a denial of service or have other unspecified impact via control over malloc.
CVE-2025-39945 1 Linux 1 Linux Kernel 2026-01-23 7.8 High
In the Linux kernel, the following vulnerability has been resolved: cnic: Fix use-after-free bugs in cnic_delete_task The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(), which does not guarantee that the delayed work item 'delete_task' has fully completed if it was already running. Additionally, the delayed work item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after the cyclic work items have finished executing, a delayed work item may still exist in the workqueue. This leads to use-after-free scenarios where the cnic_dev is deallocated by cnic_free_dev(), while delete_task remains active and attempt to dereference cnic_dev in cnic_delete_task(). A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) cnic_netdev_event() | cnic_stop_hw() | cnic_delete_task() cnic_cm_stop_bnx2x_hw() | ... cancel_delayed_work() | /* the queue_delayed_work() flush_workqueue() | executes after flush_workqueue()*/ | queue_delayed_work() cnic_free_dev(dev)//free | cnic_delete_task() //new instance | dev = cp->dev; //use Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the cyclic delayed work item is properly canceled and that any ongoing execution of the work item completes before the cnic_dev is deallocated. Furthermore, since cancel_delayed_work_sync() uses __flush_work(work, true) to synchronously wait for any currently executing instance of the work item to finish, the flush_workqueue() becomes redundant and should be removed. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated the cnic PCI device in QEMU and introduced intentional delays — such as inserting calls to ssleep() within the cnic_delete_task() function — to increase the likelihood of triggering the bug.