ReportizFlow
Filtered by vendor
Subscriptions
Total
995 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-27560 | 1 Intel | 1 Intel Platforms | 2026-04-15 | 6 Medium |
| Loop with unreachable exit condition ('infinite loop') for some Intel(R) Platform within Ring 0: Kernel may allow a denial of service. System software adversary with a privileged user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | ||||
| CVE-2025-20136 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense Software | 2026-04-15 | 8.6 High |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. | ||||
| CVE-2025-30187 | 1 Powerdns | 1 Dnsdist | 2026-04-15 | 3.7 Low |
| In some circumstances, when DNSdist is configured to use the nghttp2 library to process incoming DNS over HTTPS queries, an attacker might be able to cause a denial of service by crafting a DoH exchange that triggers an unbounded I/O read loop, causing an unexpected consumption of CPU resources. | ||||
| CVE-2024-44337 | 1 Gomarkdown | 1 Markdown | 2026-04-15 | 5.1 Medium |
| The package `github.com/gomarkdown/markdown` is a Go library for parsing Markdown text and rendering as HTML. Prior to pseudoversion `v0.0.0-20240729232818-a2a9c4f`, which corresponds with commit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252`, there was a logical problem in the paragraph function of the parser/block.go file, which allowed a remote attacker to cause a denial of service (DoS) condition by providing a tailor-made input that caused an infinite loop, causing the program to hang and consume resources indefinitely. Submit `a2a9c4f76ef5a5c32108e36f7c47f8d310322252` contains fixes to this problem. | ||||
| CVE-2025-20217 | 1 Cisco | 1 Firepower Threat Defense Software | 2026-04-15 | 8.6 High |
| A vulnerability in the packet inspection functionality of the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incorrect processing of traffic that is inspected by an affected device. An attacker could exploit this vulnerability by sending crafted traffic through the affected device. A successful exploit could allow the attacker to cause the affected device to enter an infinite loop while inspecting traffic, resulting in a DoS condition. The system watchdog will restart the Snort process automatically. | ||||
| CVE-2024-24788 | 1 Redhat | 15 Ansible Automation Platform, Ceph Storage, Cost Management and 12 more | 2026-04-15 | 5.9 Medium |
| A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop. | ||||
| CVE-2025-23221 | 1 Dahlia | 1 Fedify | 2026-04-15 | 5.4 Medium |
| Fedify is a TypeScript library for building federated server apps powered by ActivityPub and other standards. This vulnerability allows a user to maneuver the Webfinger mechanism to perform a GET request to any internal resource on any Host, Port, URL combination regardless of present security mechanisms, and forcing the victim’s server into an infinite loop causing Denial of Service. Moreover, this issue can also be maneuvered into performing a Blind SSRF attack. This vulnerability is fixed in 1.0.14, 1.1.11, 1.2.11, and 1.3.4. | ||||
| CVE-2024-8088 | 2 Python Software Foundation, Redhat | 2 Cpython, Enterprise Linux | 2026-04-15 | 5.3 Medium |
| There is a HIGH severity vulnerability affecting the CPython "zipfile" module affecting "zipfile.Path". Note that the more common API "zipfile.ZipFile" class is unaffected. When iterating over names of entries in a zip archive (for example, methods of "zipfile.Path" like "namelist()", "iterdir()", etc) the process can be put into an infinite loop with a maliciously crafted zip archive. This defect applies when reading only metadata or extracting the contents of the zip archive. Programs that are not handling user-controlled zip archives are not affected. | ||||
| CVE-2024-10821 | 2026-04-15 | N/A | ||
| A Denial of Service (DoS) vulnerability in the multipart request boundary processing mechanism of the Invoke-AI server (version v5.0.1) allows unauthenticated attackers to cause excessive resource consumption. The server fails to handle excessive characters appended to the end of multipart boundaries, leading to an infinite loop and a complete denial of service for all users. The affected endpoint is `/api/v1/images/upload`. | ||||
| CVE-2024-2397 | 2026-04-15 | 6.2 Medium | ||
| Due to a bug in packet data buffers management, the PPP printer in tcpdump can enter an infinite loop when reading a crafted DLT_PPP_SERIAL .pcap savefile. This problem does not affect any tcpdump release, but it affected the git master branch from 2023-06-05 to 2024-03-21. | ||||
| CVE-2025-55118 | 1 Bmc | 1 Control-m/agent | 2026-04-15 | 8.9 High |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured. The issue occurs in the following cases: * Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n"; * Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" | ||||
| CVE-2024-32886 | 1 Vitessio | 1 Vitess | 2026-04-15 | 4.9 Medium |
| Vitess is a database clustering system for horizontal scaling of MySQL. When executing the following simple query, the `vtgate` will go into an endless loop that also keeps consuming memory and eventually will run out of memory. This vulnerability is fixed in 19.0.4, 18.0.5, and 17.0.7. | ||||
| CVE-2023-50763 | 1 Siemens | 8 Simatic Cp 1542sp-1, Simatic Cp 1542sp-1 Irc, Simatic Cp 1543sp-1 and 5 more | 2026-04-15 | 4.9 Medium |
| A vulnerability has been identified in SIMATIC CP 1542SP-1 (6GK7542-6UX00-0XE0) (All versions < V2.3), SIMATIC CP 1542SP-1 IRC (6GK7542-6VX00-0XE0) (All versions < V2.3), SIMATIC CP 1543SP-1 (6GK7543-6WX00-0XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1542SP-1 IRC TX RAIL (6AG2542-6VX00-4XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC (6AG1543-6WX00-7XE0) (All versions < V2.3), SIPLUS ET 200SP CP 1543SP-1 ISEC TX RAIL (6AG2543-6WX00-4XE0) (All versions < V2.3), SIPLUS TIM 1531 IRC (6AG1543-1MX00-7XE0) (All versions < V2.4.8), TIM 1531 IRC (6GK7543-1MX00-0XE0) (All versions < V2.4.8). The web server of affected products, if configured to allow the import of PKCS12 containers, could end up in an infinite loop when processing incomplete certificate chains. This could allow an authenticated remote attacker to create a denial of service condition by importing specially crafted PKCS12 containers. | ||||
| CVE-2025-42954 | 2026-04-15 | 2.7 Low | ||
| SAP NetWeaver Business Warehouse CCAW application allows a privileged attacker to cause a high CPU load by executing a RFC enabled function modules without any input parameters, which results in reduced performance or interrupted operation of the affected resource. This leads to low impact on availability of the application, there is no impact on confidentiality and integrity. | ||||
| CVE-2025-3857 | 2026-04-15 | 7.5 High | ||
| When reading binary Ion data through Amazon.IonDotnet using the RawBinaryReader class, Amazon.IonDotnet does not check the number of bytes read from the underlying stream while deserializing the binary format. If the Ion data is malformed or truncated, this triggers an infinite loop condition that could potentially result in a denial of service. Users should upgrade to Amazon.IonDotnet version 1.3.1 and ensure any forked or derivative code is patched to incorporate the new fixes. | ||||
| CVE-2025-29776 | 2026-04-15 | N/A | ||
| Azle is a WebAssembly runtime for TypeScript and JavaScript on ICP. Calling `setTimer` in Azle versions `0.27.0`, `0.28.0`, and `0.29.0` causes an immediate infinite loop of timers to be executed on the canister, each timer attempting to clean up the global state of the previous timer. The infinite loop will occur with any valid invocation of `setTimer`. The problem has been fixed as of Azle version `0.30.0`. As a workaround, if a canister is caught in this infinite loop after calling `setTimer`, the canister can be upgraded and the timers will all be cleared, thus ending the loop. | ||||
| CVE-2022-0778 | 8 Debian, Fedoraproject, Mariadb and 5 more | 25 Debian Linux, Fedora, Mariadb and 22 more | 2026-04-14 | 7.5 High |
| The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). | ||||
| CVE-2026-23276 | 1 Linux | 1 Linux Kernel | 2026-04-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: add xmit recursion limit to tunnel xmit functions Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own recursion limit. When a bond device in broadcast mode has GRE tap interfaces as slaves, and those GRE tunnels route back through the bond, multicast/broadcast traffic triggers infinite recursion between bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing kernel stack overflow. The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not sufficient because tunnel recursion involves route lookups and full IP output, consuming much more stack per level. Use a lower limit of 4 (IP_TUNNEL_RECURSION_LIMIT) to prevent overflow. Add recursion detection using dev_xmit_recursion helpers directly in iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.). Move dev_xmit_recursion helpers from net/core/dev.h to public header include/linux/netdevice.h so they can be used by tunnel code. BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160 Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11 Workqueue: mld mld_ifc_work Call Trace: <TASK> __build_flow_key.constprop.0 (net/ipv4/route.c:515) ip_rt_update_pmtu (net/ipv4/route.c:1073) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) mld_sendpack mld_ifc_work process_one_work worker_thread </TASK> | ||||
| CVE-2026-39934 | 1 Wikimedia | 1 Mediawiki-growthexperiments Extension | 2026-04-09 | N/A |
| Loop with unreachable exit condition ('infinite loop') vulnerability in The Wikimedia Foundation Mediawiki - GrowthExperiments Extension allows Leveraging Time-of-Check and Time-of-Use (TOCTOU) Race Conditions. This issue was remediated only on the `master` branch. | ||||
| CVE-2026-33891 | 1 Digitalbazaar | 1 Forge | 2026-04-08 | 7.5 High |
| Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, a Denial of Service (DoS) vulnerability exists in the node-forge library due to an infinite loop in the BigInteger.modInverse() function (inherited from the bundled jsbn library). When modInverse() is called with a zero value as input, the internal Extended Euclidean Algorithm enters an unreachable exit condition, causing the process to hang indefinitely and consume 100% CPU. Version 1.4.0 patches the issue. | ||||