ReportizFlow
Filtered by vendor
Subscriptions
Total
346 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-43878 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix input error path memory access When there is a misconfiguration of input state slow path KASAN report error. Fix this error. west login: [ 52.987278] eth1: renamed from veth11 [ 53.078814] eth1: renamed from veth21 [ 53.181355] eth1: renamed from veth31 [ 54.921702] ================================================================== [ 54.922602] BUG: KASAN: wild-memory-access in xfrmi_rcv_cb+0x2d/0x295 [ 54.923393] Read of size 8 at addr 6b6b6b6b00000000 by task ping/512 [ 54.924169] [ 54.924386] CPU: 0 PID: 512 Comm: ping Not tainted 6.9.0-08574-gcd29a4313a1b #25 [ 54.925290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 54.926401] Call Trace: [ 54.926731] <IRQ> [ 54.927009] dump_stack_lvl+0x2a/0x3b [ 54.927478] kasan_report+0x84/0xa6 [ 54.927930] ? xfrmi_rcv_cb+0x2d/0x295 [ 54.928410] xfrmi_rcv_cb+0x2d/0x295 [ 54.928872] ? xfrm4_rcv_cb+0x3d/0x5e [ 54.929354] xfrm4_rcv_cb+0x46/0x5e [ 54.929804] xfrm_rcv_cb+0x7e/0xa1 [ 54.930240] xfrm_input+0x1b3a/0x1b96 [ 54.930715] ? xfrm_offload+0x41/0x41 [ 54.931182] ? raw_rcv+0x292/0x292 [ 54.931617] ? nf_conntrack_confirm+0xa2/0xa2 [ 54.932158] ? skb_sec_path+0xd/0x3f [ 54.932610] ? xfrmi_input+0x90/0xce [ 54.933066] xfrm4_esp_rcv+0x33/0x54 [ 54.933521] ip_protocol_deliver_rcu+0xd7/0x1b2 [ 54.934089] ip_local_deliver_finish+0x110/0x120 [ 54.934659] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.935248] NF_HOOK.constprop.0+0xf8/0x138 [ 54.935767] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.936317] ? secure_tcpv6_ts_off+0x23/0x168 [ 54.936859] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.937454] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.938135] NF_HOOK.constprop.0+0xf8/0x138 [ 54.938663] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.939220] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.939904] ? ip_local_deliver_finish+0x120/0x120 [ 54.940497] __netif_receive_skb_one_core+0xc9/0x107 [ 54.941121] ? __netif_receive_skb_list_core+0x1c2/0x1c2 [ 54.941771] ? blk_mq_start_stopped_hw_queues+0xc7/0xf9 [ 54.942413] ? blk_mq_start_stopped_hw_queue+0x38/0x38 [ 54.943044] ? virtqueue_get_buf_ctx+0x295/0x46b [ 54.943618] process_backlog+0xb3/0x187 [ 54.944102] __napi_poll.constprop.0+0x57/0x1a7 [ 54.944669] net_rx_action+0x1cb/0x380 [ 54.945150] ? __napi_poll.constprop.0+0x1a7/0x1a7 [ 54.945744] ? vring_new_virtqueue+0x17a/0x17a [ 54.946300] ? note_interrupt+0x2cd/0x367 [ 54.946805] handle_softirqs+0x13c/0x2c9 [ 54.947300] do_softirq+0x5f/0x7d [ 54.947727] </IRQ> [ 54.948014] <TASK> [ 54.948300] __local_bh_enable_ip+0x48/0x62 [ 54.948832] __neigh_event_send+0x3fd/0x4ca [ 54.949361] neigh_resolve_output+0x1e/0x210 [ 54.949896] ip_finish_output2+0x4bf/0x4f0 [ 54.950410] ? __ip_finish_output+0x171/0x1b8 [ 54.950956] ip_send_skb+0x25/0x57 [ 54.951390] raw_sendmsg+0xf95/0x10c0 [ 54.951850] ? check_new_pages+0x45/0x71 [ 54.952343] ? raw_hash_sk+0x21b/0x21b [ 54.952815] ? kernel_init_pages+0x42/0x51 [ 54.953337] ? prep_new_page+0x44/0x51 [ 54.953811] ? get_page_from_freelist+0x72b/0x915 [ 54.954390] ? signal_pending_state+0x77/0x77 [ 54.954936] ? preempt_count_sub+0x14/0xb3 [ 54.955450] ? __might_resched+0x8a/0x240 [ 54.955951] ? __might_sleep+0x25/0xa0 [ 54.956424] ? first_zones_zonelist+0x2c/0x43 [ 54.956977] ? __rcu_read_lock+0x2d/0x3a [ 54.957476] ? __pte_offset_map+0x32/0xa4 [ 54.957980] ? __might_resched+0x8a/0x240 [ 54.958483] ? __might_sleep+0x25/0xa0 [ 54.958963] ? inet_send_prepare+0x54/0x54 [ 54.959478] ? sock_sendmsg_nosec+0x42/0x6c [ 54.960000] sock_sendmsg_nosec+0x42/0x6c [ 54.960502] __sys_sendto+0x15d/0x1cc [ 54.960966] ? __x64_sys_getpeername+0x44/0x44 [ 54.961522] ? __handle_mm_fault+0x679/0xae4 [ 54.962068] ? find_vma+0x6b/0x ---truncated--- | ||||
| CVE-2023-52871 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: llcc: Handle a second device without data corruption Usually there is only one llcc device. But if there were a second, even a failed probe call would modify the global drv_data pointer. So check if drv_data is valid before overwriting it. | ||||
| CVE-2023-52839 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Do not broadcast to other cpus when starting a counter This command: $ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000 gives rise to this kernel warning: [ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436 [ 444.364515] Modules linked in: [ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73 [ 444.364771] Hardware name: riscv-virtio,qemu (DT) [ 444.364868] epc : smp_call_function_many_cond+0x42c/0x436 [ 444.364917] ra : on_each_cpu_cond_mask+0x20/0x32 [ 444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800 [ 444.364966] gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0 [ 444.364982] t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0 [ 444.364998] s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000 [ 444.365013] a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100 [ 444.365029] a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000 [ 444.365044] s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98 [ 444.365060] s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000 [ 444.365075] s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001 [ 444.365090] s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6 [ 444.365104] t5 : 0000000400000000 t6 : ff60000002e010d0 [ 444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436 [ 444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32 [ 444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa [ 444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66 [ 444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac [ 444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c [ 444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e [ 444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96 [ 444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52 [ 444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98 [ 444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a [ 444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da [ 444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a [ 444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114 [ 444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a [ 444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46 [ 444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74 [ 444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e [ 444.365796] ---[ end trace 0000000000000000 ]--- That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic in riscv SBI mmap support") was wrong since there is no need to broadcast to other cpus when starting a counter, that's only needed in mmap when the counters could have already been started on other cpus, so simply remove this broadcast. | ||||
| CVE-2023-52787 | 1 Linux | 1 Linux Kernel | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: make sure active queue usage is held for bio_integrity_prep() blk_integrity_unregister() can come if queue usage counter isn't held for one bio with integrity prepared, so this request may be completed with calling profile->complete_fn, then kernel panic. Another constraint is that bio_integrity_prep() needs to be called before bio merge. Fix the issue by: - call bio_integrity_prep() with one queue usage counter grabbed reliably - call bio_integrity_prep() before bio merge | ||||
| CVE-2024-41030 | 1 Linux | 1 Linux Kernel | 2025-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: discard write access to the directory open may_open() does not allow a directory to be opened with the write access. However, some writing flags set by client result in adding write access on server, making ksmbd incompatible with FUSE file system. Simply, let's discard the write access when opening a directory. list_add corruption. next is NULL. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:26! pc : __list_add_valid+0x88/0xbc lr : __list_add_valid+0x88/0xbc Call trace: __list_add_valid+0x88/0xbc fuse_finish_open+0x11c/0x170 fuse_open_common+0x284/0x5e8 fuse_dir_open+0x14/0x24 do_dentry_open+0x2a4/0x4e0 dentry_open+0x50/0x80 smb2_open+0xbe4/0x15a4 handle_ksmbd_work+0x478/0x5ec process_one_work+0x1b4/0x448 worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 | ||||
| CVE-2024-41003 | 1 Linux | 1 Linux Kernel | 2025-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix reg_set_min_max corruption of fake_reg Juan reported that after doing some changes to buzzer [0] and implementing a new fuzzing strategy guided by coverage, they noticed the following in one of the probes: [...] 13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar() 14: (b7) r0 = 0 ; R0_w=0 15: (b4) w0 = -1 ; R0_w=0xffffffff 16: (74) w0 >>= 1 ; R0_w=0x7fffffff 17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff)) 18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd)) 19: (56) if w6 != 0x7ffffffd goto pc+1 REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0) 19: R6_w=0x7fffffff 20: (95) exit from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd)) 22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd)) 23: (95) exit from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: (14) w6 -= 14 ; R6_w=0 [...] What can be seen here is a register invariant violation on line 19. After the binary-or in line 18, the verifier knows that bit 2 is set but knows nothing about the rest of the content which was loaded from a map value, meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in line 19 the verifier analyzes the branch, it splits the register states in reg_set_min_max() into the registers of the true branch (true_reg1, true_reg2) and the registers of the false branch (false_reg1, false_reg2). Since the test is w6 != 0x7ffffffd, the src_reg is a known constant. Internally, the verifier creates a "fake" register initialized as scalar to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now, for line 19, it is mathematically impossible to take the false branch of this program, yet the verifier analyzes it. It is impossible because the second bit of r6 will be set due to the prior or operation and the constant in the condition has that bit unset (hex(fd) == binary(1111 1101). When the verifier first analyzes the false / fall-through branch, it will compute an intersection between the var_off of r6 and of the constant. This is because the verifier creates a "fake" register initialized to the value of the constant. The intersection result later refines both registers in regs_refine_cond_op(): [...] t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off)); reg1->var_o ---truncated--- | ||||
| CVE-2023-52743 | 1 Linux | 1 Linux Kernel | 2025-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: Do not use WQ_MEM_RECLAIM flag for workqueue When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_r ---truncated--- | ||||
| CVE-2023-52750 | 1 Linux | 1 Linux Kernel | 2025-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly byte-swap NOP when compiling for big-endian, and the resulting series of bytes happened to match the encoding of FNMADD S21, S30, S0, S0. This went unnoticed until commit: 34f66c4c4d5518c1 ("arm64: Use a positive cpucap for FP/SIMD") Prior to that commit, the kernel would always enable the use of FPSIMD early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of FNMADD within the kernel was not detected, but could result in the corruption of user or kernel FPSIMD state. After that commit, the instructions happen to trap during boot prior to FPSIMD being detected and enabled, e.g. | Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __pi_strcmp+0x1c/0x150 | lr : populate_properties+0xe4/0x254 | sp : ffffd014173d3ad0 | x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000 | x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008 | x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044 | x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005 | x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000 | x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000 | x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000 | x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a | x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8 | Kernel panic - not syncing: Unhandled exception | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0xec/0x108 | show_stack+0x18/0x2c | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | panic+0x13c/0x340 | el1t_64_irq_handler+0x0/0x1c | el1_abort+0x0/0x5c | el1h_64_sync+0x64/0x68 | __pi_strcmp+0x1c/0x150 | unflatten_dt_nodes+0x1e8/0x2d8 | __unflatten_device_tree+0x5c/0x15c | unflatten_device_tree+0x38/0x50 | setup_arch+0x164/0x1e0 | start_kernel+0x64/0x38c | __primary_switched+0xbc/0xc4 Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked commit. | ||||
| CVE-2023-52778 | 1 Linux | 1 Linux Kernel | 2025-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: deal with large GSO size After the blamed commit below, the TCP sockets (and the MPTCP subflows) can build egress packets larger than 64K. That exceeds the maximum DSS data size, the length being misrepresent on the wire and the stream being corrupted, as later observed on the receiver: WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0 CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705 RSP: 0018:ffffc90000006e80 EFLAGS: 00010246 RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908 RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908 R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29 FS: 00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <IRQ> mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819 subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409 tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151 tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098 tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483 tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749 ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438 ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483 ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304 __netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532 process_backlog+0x353/0x660 net/core/dev.c:5974 __napi_poll+0xc6/0x5a0 net/core/dev.c:6536 net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603 __do_softirq+0x184/0x524 kernel/softirq.c:553 do_softirq+0xdd/0x130 kernel/softirq.c:454 Address the issue explicitly bounding the maximum GSO size to what MPTCP actually allows. | ||||
| CVE-2023-52784 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: stop the device in bond_setup_by_slave() Commit 9eed321cde22 ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec225765 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_ ---truncated--- | ||||
| CVE-2021-47429 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix unrecoverable MCE calling async handler from NMI The machine check handler is not considered NMI on 64s. The early handler is the true NMI handler, and then it schedules the machine_check_exception handler to run when interrupts are enabled. This works fine except the case of an unrecoverable MCE, where the true NMI is taken when MSR[RI] is clear, it can not recover, so it calls machine_check_exception directly so something might be done about it. Calling an async handler from NMI context can result in irq state and other things getting corrupted. This can also trigger the BUG at arch/powerpc/include/asm/interrupt.h:168 BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); Fix this by making an _async version of the handler which is called in the normal case, and a NMI version that is called for unrecoverable interrupts. | ||||
| CVE-2024-57806 | 1 Linux | 1 Linux Kernel | 2025-09-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction atomicity bug when enabling simple quotas Set squota incompat bit before committing the transaction that enables the feature. With the config CONFIG_BTRFS_ASSERT enabled, an assertion failure occurs regarding the simple quota feature. [5.596534] assertion failed: btrfs_fs_incompat(fs_info, SIMPLE_QUOTA), in fs/btrfs/qgroup.c:365 [5.597098] ------------[ cut here ]------------ [5.597371] kernel BUG at fs/btrfs/qgroup.c:365! [5.597946] CPU: 1 UID: 0 PID: 268 Comm: mount Not tainted 6.13.0-rc2-00031-gf92f4749861b #146 [5.598450] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [5.599008] RIP: 0010:btrfs_read_qgroup_config+0x74d/0x7a0 [5.604303] <TASK> [5.605230] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.605538] ? exc_invalid_op+0x56/0x70 [5.605775] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606066] ? asm_exc_invalid_op+0x1f/0x30 [5.606441] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606741] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.607038] ? try_to_wake_up+0x317/0x760 [5.607286] open_ctree+0xd9c/0x1710 [5.607509] btrfs_get_tree+0x58a/0x7e0 [5.608002] vfs_get_tree+0x2e/0x100 [5.608224] fc_mount+0x16/0x60 [5.608420] btrfs_get_tree+0x2f8/0x7e0 [5.608897] vfs_get_tree+0x2e/0x100 [5.609121] path_mount+0x4c8/0xbc0 [5.609538] __x64_sys_mount+0x10d/0x150 The issue can be easily reproduced using the following reproducer: root@q:linux# cat repro.sh set -e mkfs.btrfs -q -f /dev/sdb mount /dev/sdb /mnt/btrfs btrfs quota enable -s /mnt/btrfs umount /mnt/btrfs mount /dev/sdb /mnt/btrfs The issue is that when enabling quotas, at btrfs_quota_enable(), we set BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE at fs_info->qgroup_flags and persist it in the quota root in the item with the key BTRFS_QGROUP_STATUS_KEY, but we only set the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA after we commit the transaction used to enable simple quotas. This means that if after that transaction commit we unmount the filesystem without starting and committing any other transaction, or we have a power failure, the next time we mount the filesystem we will find the flag BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE set in the item with the key BTRFS_QGROUP_STATUS_KEY but we will not find the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA set in the superblock, triggering an assertion failure at: btrfs_read_qgroup_config() -> qgroup_read_enable_gen() To fix this issue, set the BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA flag immediately after setting the BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE. This ensures that both flags are flushed to disk within the same transaction. | ||||
| CVE-2021-47468 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-09-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: Fix sleeping function called from invalid context The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250 | ||||
| CVE-2021-47450 | 1 Linux | 1 Linux Kernel | 2025-09-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix host stage-2 PGD refcount The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact(). | ||||
| CVE-2023-52836 | 1 Linux | 1 Linux Kernel | 2025-09-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: locking/ww_mutex/test: Fix potential workqueue corruption In some cases running with the test-ww_mutex code, I was seeing odd behavior where sometimes it seemed flush_workqueue was returning before all the work threads were finished. Often this would cause strange crashes as the mutexes would be freed while they were being used. Looking at the code, there is a lifetime problem as the controlling thread that spawns the work allocates the "struct stress" structures that are passed to the workqueue threads. Then when the workqueue threads are finished, they free the stress struct that was passed to them. Unfortunately the workqueue work_struct node is in the stress struct. Which means the work_struct is freed before the work thread returns and while flush_workqueue is waiting. It seems like a better idea to have the controlling thread both allocate and free the stress structures, so that we can be sure we don't corrupt the workqueue by freeing the structure prematurely. So this patch reworks the test to do so, and with this change I no longer see the early flush_workqueue returns. | ||||
| CVE-2023-52831 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Don't offline the last non-isolated CPU If a system has isolated CPUs via the "isolcpus=" command line parameter, then an attempt to offline the last housekeeping CPU will result in a WARN_ON() when rebuilding the scheduler domains and a subsequent panic due to and unhandled empty CPU mas in partition_sched_domains_locked(). cpuset_hotplug_workfn() rebuild_sched_domains_locked() ndoms = generate_sched_domains(&doms, &attr); cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN)); Thus results in an empty CPU mask which triggers the warning and then the subsequent crash: WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408 Call trace: build_sched_domains+0x120c/0x1408 partition_sched_domains_locked+0x234/0x880 rebuild_sched_domains_locked+0x37c/0x798 rebuild_sched_domains+0x30/0x58 cpuset_hotplug_workfn+0x2a8/0x930 Unable to handle kernel paging request at virtual address fffe80027ab37080 partition_sched_domains_locked+0x318/0x880 rebuild_sched_domains_locked+0x37c/0x798 Aside of the resulting crash, it does not make any sense to offline the last last housekeeping CPU. Prevent this by masking out the non-housekeeping CPUs when selecting a target CPU for initiating the CPU unplug operation via the work queue. | ||||
| CVE-2023-52754 | 1 Linux | 1 Linux Kernel | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: imon: fix access to invalid resource for the second interface imon driver probes two USB interfaces, and at the probe of the second interface, the driver assumes blindly that the first interface got bound with the same imon driver. It's usually true, but it's still possible that the first interface is bound with another driver via a malformed descriptor. Then it may lead to a memory corruption, as spotted by syzkaller; imon driver accesses the data from drvdata as struct imon_context object although it's a completely different one that was assigned by another driver. This patch adds a sanity check -- whether the first interface is really bound with the imon driver or not -- for avoiding the problem above at the probe time. | ||||
| CVE-2022-49171 | 1 Linux | 1 Linux Kernel | 2025-09-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't BUG if someone dirty pages without asking ext4 first [un]pin_user_pages_remote is dirtying pages without properly warning the file system in advance. A related race was noted by Jan Kara in 2018[1]; however, more recently instead of it being a very hard-to-hit race, it could be reliably triggered by process_vm_writev(2) which was discovered by Syzbot[2]. This is technically a bug in mm/gup.c, but arguably ext4 is fragile in that if some other kernel subsystem dirty pages without properly notifying the file system using page_mkwrite(), ext4 will BUG, while other file systems will not BUG (although data will still be lost). So instead of crashing with a BUG, issue a warning (since there may be potential data loss) and just mark the page as clean to avoid unprivileged denial of service attacks until the problem can be properly fixed. More discussion and background can be found in the thread starting at [2]. [1] https://lore.kernel.org/linux-mm/[email protected] [2] https://lore.kernel.org/r/[email protected] | ||||
| CVE-2022-49325 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: add accessors to read/set tp->snd_cwnd We had various bugs over the years with code breaking the assumption that tp->snd_cwnd is greater than zero. Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction") can trigger, and without a repro we would have to spend considerable time finding the bug. Instead of complaining too late, we want to catch where and when tp->snd_cwnd is set to an illegal value. | ||||
| CVE-2022-49345 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: xfrm: unexport __init-annotated xfrm4_protocol_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, net/ipv4/xfrm4_policy.c is never compiled as modular. (CONFIG_XFRM is boolean) | ||||