ReportizFlow
Filtered by vendor
Subscriptions
Total
12613 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40836 | 1 Ericsson | 2 Indoor Connect 8855, Indoor Connect 8855 Firmware | 2025-10-02 | 9.8 Critical |
| Ericsson Indoor Connect 8855 contains an improper input validation vulnerability which if exploited can allow an attacker to execute commands with escalated privileges. | ||||
| CVE-2024-33659 | 1 Ami | 1 Aptio V | 2025-10-02 | 8.8 High |
| AMI APTIOV contains a vulnerability in BIOS where an attacker may cause an Improper Input Validation by a local attacker. Successful exploitation of these vulnerabilities may lead to overwriting arbitrary memory and execute arbitrary code at SMM level, also impacting Confidentiality, Integrity, and Availability. | ||||
| CVE-2025-33043 | 1 Ami | 1 Aptio V | 2025-10-02 | 5.8 Medium |
| APTIOV contains a vulnerability in BIOS where an attacker may cause an Improper Input Validation locally. Successful exploitation of this vulnerability can potentially impact of integrity. | ||||
| CVE-2024-29039 | 3 Redhat, Tpm2-tools Project, Tpm2 Software | 3 Enterprise Linux, Tpm2-tools, Tpm2 Tools | 2025-10-02 | 9.1 Critical |
| tpm2 is the source repository for the Trusted Platform Module (TPM2.0) tools. This vulnerability allows attackers to manipulate tpm2_checkquote outputs by altering the TPML_PCR_SELECTION in the PCR input file. As a result, digest values are incorrectly mapped to PCR slots and banks, providing a misleading picture of the TPM state. This issue has been patched in version 5.7. | ||||
| CVE-2024-53225 | 1 Linux | 1 Linux Kernel | 2025-10-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift When configuring a kernel with PAGE_SIZE=4KB, depending on its setting of CONFIG_CMA_ALIGNMENT, VCMDQ_LOG2SIZE_MAX=19 could fail the alignment test and trigger a WARN_ON: WARNING: at drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:3646 Call trace: arm_smmu_init_one_queue+0x15c/0x210 tegra241_cmdqv_init_structures+0x114/0x338 arm_smmu_device_probe+0xb48/0x1d90 Fix it by capping max_n_shift to CMDQ_MAX_SZ_SHIFT as SMMUv3 CMDQ does. | ||||
| CVE-2024-53094 | 1 Linux | 1 Linux Kernel | 2025-10-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES While running ISER over SIW, the initiator machine encounters a warning from skb_splice_from_iter() indicating that a slab page is being used in send_page. To address this, it is better to add a sendpage_ok() check within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag should be disabled before entering the network stack. A similar issue has been discussed for NVMe in this thread: https://lore.kernel.org/all/[email protected]/ WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320 Call Trace: tcp_sendmsg_locked+0x368/0xe40 siw_tx_hdt+0x695/0xa40 [siw] siw_qp_sq_process+0x102/0xb00 [siw] siw_sq_resume+0x39/0x110 [siw] siw_run_sq+0x74/0x160 [siw] kthread+0xd2/0x100 ret_from_fork+0x34/0x40 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2024-53072 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Detect when STB is not available Loading the amd_pmc module as: amd_pmc enable_stb=1 ...can result in the following messages in the kernel ring buffer: amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340 Further debugging reveals that this occurs when the requests for S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0, indicating that the STB is inaccessible. To prevent the ioremap warning and provide clarity to the user, handle the invalid address and display an error message. | ||||
| CVE-2024-50185 | 1 Linux | 1 Linux Kernel | 2025-10-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: handle consistently DSS corruption Bugged peer implementation can send corrupted DSS options, consistently hitting a few warning in the data path. Use DEBUG_NET assertions, to avoid the splat on some builds and handle consistently the error, dumping related MIBs and performing fallback and/or reset according to the subflow type. | ||||
| CVE-2024-50182 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: secretmem: disable memfd_secret() if arch cannot set direct map Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This is the case for example on some arm64 configurations, where marking 4k PTEs in the direct map not present can only be done if the direct map is set up at 4k granularity in the first place (as ARM's break-before-make semantics do not easily allow breaking apart large/gigantic pages). More precisely, on arm64 systems with !can_set_direct_map(), set_direct_map_invalid_noflush() is a no-op, however it returns success (0) instead of an error. This means that memfd_secret will seemingly "work" (e.g. syscall succeeds, you can mmap the fd and fault in pages), but it does not actually achieve its goal of removing its memory from the direct map. Note that with this patch, memfd_secret() will start erroring on systems where can_set_direct_map() returns false (arm64 with CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and CONFIG_KFENCE=n), but that still seems better than the current silent failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most arm64 systems actually have a working memfd_secret() and aren't be affected. From going through the iterations of the original memfd_secret patch series, it seems that disabling the syscall in these scenarios was the intended behavior [1] (preferred over having set_direct_map_invalid_noflush return an error as that would result in SIGBUSes at page-fault time), however the check for it got dropped between v16 [2] and v17 [3], when secretmem moved away from CMA allocations. [1]: https://lore.kernel.org/lkml/[email protected]/ [2]: https://lore.kernel.org/lkml/[email protected]/#t [3]: https://lore.kernel.org/lkml/[email protected]/ | ||||
| CVE-2024-50163 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Make sure internal and UAPI bpf_redirect flags don't overlap The bpf_redirect_info is shared between the SKB and XDP redirect paths, and the two paths use the same numeric flag values in the ri->flags field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that if skb bpf_redirect_neigh() is used with a non-NULL params argument and, subsequently, an XDP redirect is performed using the same bpf_redirect_info struct, the XDP path will get confused and end up crashing, which syzbot managed to trigger. With the stack-allocated bpf_redirect_info, the structure is no longer shared between the SKB and XDP paths, so the crash doesn't happen anymore. However, different code paths using identically-numbered flag values in the same struct field still seems like a bit of a mess, so this patch cleans that up by moving the flag definitions together and redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make sure the overlap is not re-introduced by mistake. | ||||
| CVE-2024-50142 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-10-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: validate new SA's prefixlen using SA family when sel.family is unset This expands the validation introduced in commit 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.") syzbot created an SA with usersa.sel.family = AF_UNSPEC usersa.sel.prefixlen_s = 128 usersa.family = AF_INET Because of the AF_UNSPEC selector, verify_newsa_info doesn't put limits on prefixlen_{s,d}. But then copy_from_user_state sets x->sel.family to usersa.family (AF_INET). Do the same conversion in verify_newsa_info before validating prefixlen_{s,d}, since that's how prefixlen is going to be used later on. | ||||
| CVE-2024-50092 | 1 Linux | 1 Linux Kernel | 2025-10-02 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: netconsole: fix wrong warning A warning is triggered when there is insufficient space in the buffer for userdata. However, this is not an issue since userdata will be sent in the next iteration. Current warning message: ------------[ cut here ]------------ WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0 ? write_ext_msg+0x3b6/0x3d0 console_flush_all+0x1e9/0x330 The code incorrectly issues a warning when this_chunk is zero, which is a valid scenario. The warning should only be triggered when this_chunk is negative. | ||||
| CVE-2024-50081 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: setup queue ->tag_set before initializing hctx Commit 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx") needs to check queue mapping via tag set in hctx's cpuhp handler. However, q->tag_set may not be setup yet when the cpuhp handler is enabled, then kernel oops is triggered. Fix the issue by setup queue tag_set before initializing hctx. | ||||
| CVE-2025-21696 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: clear uffd-wp PTE/PMD state on mremap() When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths. | ||||
| CVE-2024-58084 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool() Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization") introduced a write barrier in probe function to store global '__scm' variable. We all known barriers are paired (see memory-barriers.txt: "Note that write barriers should normally be paired with read or address-dependency barriers"), therefore accessing it from concurrent contexts requires read barrier. Previous commit added such barrier in qcom_scm_is_available(), so let's use that directly. Lack of this read barrier can result in fetching stale '__scm' variable value, NULL, and dereferencing it. Note that barrier in qcom_scm_is_available() satisfies here the control dependency. | ||||
| CVE-2024-57952 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "libfs: fix infinite directory reads for offset dir" The current directory offset allocator (based on mtree_alloc_cyclic) stores the next offset value to return in octx->next_offset. This mechanism typically returns values that increase monotonically over time. Eventually, though, the newly allocated offset value wraps back to a low number (say, 2) which is smaller than other already- allocated offset values. Yu Kuai <[email protected]> reports that, after commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir"), if a directory's offset allocator wraps, existing entries are no longer visible via readdir/getdents because offset_readdir() stops listing entries once an entry's offset is larger than octx->next_offset. These entries vanish persistently -- they can be looked up, but will never again appear in readdir(3) output. The reason for this is that the commit treats directory offsets as monotonically increasing integer values rather than opaque cookies, and introduces this comparison: if (dentry2offset(dentry) >= last_index) { On 64-bit platforms, the directory offset value upper bound is 2^63 - 1. Directory offsets will monotonically increase for millions of years without wrapping. On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator can wrap after only a few weeks (at worst). Revert commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir") to prepare for a fix that can work properly on 32-bit systems and might apply to recent LTS kernels where shmem employs the simple_offset mechanism. | ||||
| CVE-2024-57951 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hrtimers: Handle CPU state correctly on hotplug Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to CPUHP_ONLINE: Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set to 1 throughout. However, during a CPU unplug operation, the tick and the clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online state, for instance CFS incorrectly assumes that the hrtick is already active, and the chance of the clockevent device to transition to oneshot mode is also lost forever for the CPU, unless it goes back to a lower state than CPUHP_HRTIMERS_PREPARE once. This round-trip reveals another issue; cpu_base.online is not set to 1 after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer(). Aside of that, the bulk of the per CPU state is not reset either, which means there are dangling pointers in the worst case. Address this by adding a corresponding startup() callback, which resets the stale per CPU state and sets the online flag. [ tglx: Make the new callback unconditionally available, remove the online modification in the prepare() callback and clear the remaining state in the starting callback instead of the prepare callback ] | ||||
| CVE-2024-56768 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP On x86-64 calling bpf_get_smp_processor_id() in a kernel with CONFIG_SMP disabled can trigger the following bug, as pcpu_hot is unavailable: [ 8.471774] BUG: unable to handle page fault for address: 00000000936a290c [ 8.471849] #PF: supervisor read access in kernel mode [ 8.471881] #PF: error_code(0x0000) - not-present page Fix by inlining a return 0 in the !CONFIG_SMP case. | ||||
| CVE-2024-56659 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: lapb: increase LAPB_HEADER_LEN It is unclear if net/lapb code is supposed to be ready for 8021q. We can at least avoid crashes like the following : skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282 RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60 R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140 R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016 FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 nr_header+0x36/0x320 net/netrom/nr_dev.c:69 dev_hard_header include/linux/netdevice.h:3148 [inline] vlan_dev_hard_header+0x359/0x480 net/8021q/vlan_dev.c:83 dev_hard_header include/linux/netdevice.h:3148 [inline] lapbeth_data_transmit+0x1f6/0x2a0 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x91/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x168/0x1f0 net/lapb/lapb_out.c:149 lapb_establish_data_link+0x84/0xd0 lapb_device_event+0x4e0/0x670 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:8922 devinet_ioctl+0xa4e/0x1aa0 net/ipv4/devinet.c:1188 inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x158/0x460 net/socket.c:1227 sock_ioctl+0x626/0x8e0 net/socket.c:1346 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 | ||||
| CVE-2024-53219 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtiofs: use pages instead of pointer for kernel direct IO When trying to insert a 10MB kernel module kept in a virtio-fs with cache disabled, the following warning was reported: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ...... Modules linked in: CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:__alloc_pages+0x2bf/0x380 ...... Call Trace: <TASK> ? __warn+0x8e/0x150 ? __alloc_pages+0x2bf/0x380 __kmalloc_large_node+0x86/0x160 __kmalloc+0x33c/0x480 virtio_fs_enqueue_req+0x240/0x6d0 virtio_fs_wake_pending_and_unlock+0x7f/0x190 queue_request_and_unlock+0x55/0x60 fuse_simple_request+0x152/0x2b0 fuse_direct_io+0x5d2/0x8c0 fuse_file_read_iter+0x121/0x160 __kernel_read+0x151/0x2d0 kernel_read+0x45/0x50 kernel_read_file+0x1a9/0x2a0 init_module_from_file+0x6a/0xe0 idempotent_init_module+0x175/0x230 __x64_sys_finit_module+0x5d/0xb0 x64_sys_call+0x1c3/0x9e0 do_syscall_64+0x3d/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ...... </TASK> ---[ end trace 0000000000000000 ]--- The warning is triggered as follows: 1) syscall finit_module() handles the module insertion and it invokes kernel_read_file() to read the content of the module first. 2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and passes it to kernel_read(). kernel_read() constructs a kvec iter by using iov_iter_kvec() and passes it to fuse_file_read_iter(). 3) virtio-fs disables the cache, so fuse_file_read_iter() invokes fuse_direct_io(). As for now, the maximal read size for kvec iter is only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so fuse_direct_io() doesn't split the 10MB buffer. It saves the address and the size of the 10MB-sized buffer in out_args[0] of a fuse request and passes the fuse request to virtio_fs_wake_pending_and_unlock(). 4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to queue the request. Because virtiofs need DMA-able address, so virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for all fuse args, copies these args into the bounce buffer and passed the physical address of the bounce buffer to virtiofsd. The total length of these fuse args for the passed fuse request is about 10MB, so copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and it triggers the warning in __alloc_pages(): if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)) return NULL; 5) virtio_fs_enqueue_req() will retry the memory allocation in a kworker, but it won't help, because kmalloc() will always return NULL due to the abnormal size and finit_module() will hang forever. A feasible solution is to limit the value of max_read for virtio-fs, so the length passed to kmalloc() will be limited. However it will affect the maximal read size for normal read. And for virtio-fs write initiated from kernel, it has the similar problem but now there is no way to limit fc->max_write in kernel. So instead of limiting both the values of max_read and max_write in kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use pages instead of pointer to pass the KVEC_IO data. After switching to pages for KVEC_IO data, these pages will be used for DMA through virtio-fs. If these pages are backed by vmalloc(), {flush|invalidate}_kernel_vmap_range() are necessary to flush or invalidate the cache before the DMA operation. So add two new fields in fuse_args_pages to record the base address of vmalloc area and the condition indicating whether invalidation is needed. Perform the flush in fuse_get_user_pages() for write operations and the invalidation in fuse_release_user_pages() for read operations. It may seem necessary to introduce another fie ---truncated--- | ||||