Filtered by vendor Redhat Subscriptions
Total 23421 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2024-46713 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: perf/aux: Fix AUX buffer serialization Ole reported that event->mmap_mutex is strictly insufficient to serialize the AUX buffer, add a per RB mutex to fully serialize it. Note that in the lock order comment the perf_event::mmap_mutex order was already wrong, that is, it nesting under mmap_lock is not new with this patch.
CVE-2024-46711 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix ID 0 endp usage after multiple re-creations 'local_addr_used' and 'add_addr_accepted' are decremented for addresses not related to the initial subflow (ID0), because the source and destination addresses of the initial subflows are known from the beginning: they don't count as "additional local address being used" or "ADD_ADDR being accepted". It is then required not to increment them when the entrypoint used by the initial subflow is removed and re-added during a connection. Without this modification, this entrypoint cannot be removed and re-added more than once.
CVE-2024-46695 2 Linux, Redhat 3 Linux Kernel, Enterprise Linux, Rhel Eus 2025-11-04 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: selinux,smack: don't bypass permissions check in inode_setsecctx hook Marek Gresko reports that the root user on an NFS client is able to change the security labels on files on an NFS filesystem that is exported with root squashing enabled. The end of the kerneldoc comment for __vfs_setxattr_noperm() states: * This function requires the caller to lock the inode's i_mutex before it * is executed. It also assumes that the caller will make the appropriate * permission checks. nfsd_setattr() does do permissions checking via fh_verify() and nfsd_permission(), but those don't do all the same permissions checks that are done by security_inode_setxattr() and its related LSM hooks do. Since nfsd_setattr() is the only consumer of security_inode_setsecctx(), simplest solution appears to be to replace the call to __vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This fixes the above issue and has the added benefit of causing nfsd to recall conflicting delegations on a file when a client tries to change its security label.
CVE-2024-46673 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: scsi: aacraid: Fix double-free on probe failure aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free.
CVE-2024-45026 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error recovery leading to data corruption on ESE devices Extent Space Efficient (ESE) or thin provisioned volumes need to be formatted on demand during usual IO processing. The dasd_ese_needs_format function checks for error codes that signal the non existence of a proper track format. The check for incorrect length is to imprecise since other error cases leading to transport of insufficient data also have this flag set. This might lead to data corruption in certain error cases for example during a storage server warmstart. Fix by removing the check for incorrect length and replacing by explicitly checking for invalid track format in transport mode. Also remove the check for file protected since this is not a valid ESE handling case.
CVE-2024-45022 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0 The __vmap_pages_range_noflush() assumes its argument pages** contains pages with the same page shift. However, since commit e9c3cda4d86e ("mm, vmalloc: fix high order __GFP_NOFAIL allocations"), if gfp_flags includes __GFP_NOFAIL with high order in vm_area_alloc_pages() and page allocation failed for high order, the pages** may contain two different page shifts (high order and order-0). This could lead __vmap_pages_range_noflush() to perform incorrect mappings, potentially resulting in memory corruption. Users might encounter this as follows (vmap_allow_huge = true, 2M is for PMD_SIZE): kvmalloc(2M, __GFP_NOFAIL|GFP_X) __vmalloc_node_range_noprof(vm_flags=VM_ALLOW_HUGE_VMAP) vm_area_alloc_pages(order=9) ---> order-9 allocation failed and fallback to order-0 vmap_pages_range() vmap_pages_range_noflush() __vmap_pages_range_noflush(page_shift = 21) ----> wrong mapping happens We can remove the fallback code because if a high-order allocation fails, __vmalloc_node_range_noprof() will retry with order-0. Therefore, it is unnecessary to fallback to order-0 here. Therefore, fix this by removing the fallback code.
CVE-2024-45010 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only mark 'subflow' endp as available Adding the following warning ... WARN_ON_ONCE(msk->pm.local_addr_used == 0) ... before decrementing the local_addr_used counter helped to find a bug when running the "remove single address" subtest from the mptcp_join.sh selftests. Removing a 'signal' endpoint will trigger the removal of all subflows linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used counter, which is wrong in this case because this counter is linked to 'subflow' endpoints, and here it is a 'signal' endpoint that is being removed. Now, the counter is decremented, only if the ID is being used outside of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and if the ID is not 0 -- local_addr_used is not taking into account these ones. This marking of the ID as being available, and the decrement is done no matter if a subflow using this ID is currently available, because the subflow could have been closed before.
CVE-2024-45009 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: only decrement add_addr_accepted for MPJ req Adding the following warning ... WARN_ON_ONCE(msk->pm.add_addr_accepted == 0) ... before decrementing the add_addr_accepted counter helped to find a bug when running the "remove single subflow" subtest from the mptcp_join.sh selftest. Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the subflow closure. Before this patch, and upon the reception of the RM_ADDR, the other peer will then try to decrement this add_addr_accepted. That's not correct because the attached subflows have not been created upon the reception of an ADD_ADDR. A way to solve that is to decrement the counter only if the attached subflow was an MP_JOIN to a remote id that was not 0, and initiated by the host receiving the RM_ADDR.
CVE-2024-45000 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: fs/netfs/fscache_cookie: add missing "n_accesses" check This fixes a NULL pointer dereference bug due to a data race which looks like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_rreq_write_to_cache_work RIP: 0010:cachefiles_prepare_write+0x30/0xa0 Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10 RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286 RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000 RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438 RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001 R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68 R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00 FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x15d/0x440 ? search_module_extables+0xe/0x40 ? fixup_exception+0x22/0x2f0 ? exc_page_fault+0x5f/0x100 ? asm_exc_page_fault+0x22/0x30 ? cachefiles_prepare_write+0x30/0xa0 netfs_rreq_write_to_cache_work+0x135/0x2e0 process_one_work+0x137/0x2c0 worker_thread+0x2e9/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- This happened because fscache_cookie_state_machine() was slow and was still running while another process invoked fscache_unuse_cookie(); this led to a fscache_cookie_lru_do_one() call, setting the FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by fscache_cookie_state_machine(), withdrawing the cookie via cachefiles_withdraw_cookie(), clearing cookie->cache_priv. At the same time, yet another process invoked cachefiles_prepare_write(), which found a NULL pointer in this code line: struct cachefiles_object *object = cachefiles_cres_object(cres); The next line crashes, obviously: struct cachefiles_cache *cache = object->volume->cache; During cachefiles_prepare_write(), the "n_accesses" counter is non-zero (via fscache_begin_operation()). The cookie must not be withdrawn until it drops to zero. The counter is checked by fscache_cookie_state_machine() before switching to FSCACHE_COOKIE_STATE_RELINQUISHING and FSCACHE_COOKIE_STATE_WITHDRAWING (in "case FSCACHE_COOKIE_STATE_FAILED"), but not for FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case FSCACHE_COOKIE_STATE_ACTIVE"). This patch adds the missing check. With a non-zero access counter, the function returns and the next fscache_end_cookie_access() call will queue another fscache_cookie_state_machine() call to handle the still-pending FSCACHE_COOKIE_DO_LRU_DISCARD.
CVE-2024-44970 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: SHAMPO, Fix invalid WQ linked list unlink When all the strides in a WQE have been consumed, the WQE is unlinked from the WQ linked list (mlx5_wq_ll_pop()). For SHAMPO, it is possible to receive CQEs with 0 consumed strides for the same WQE even after the WQE is fully consumed and unlinked. This triggers an additional unlink for the same wqe which corrupts the linked list. Fix this scenario by accepting 0 sized consumed strides without unlinking the WQE again.
CVE-2024-44965 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix pti_clone_pgtable() alignment assumption Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a 'short' clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions.
CVE-2024-44958 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: sched/smt: Fix unbalance sched_smt_present dec/inc I got the following warn report while doing stress test: jump label: negative count! WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0 Call Trace: <TASK> __static_key_slow_dec_cpuslocked+0x16/0x70 sched_cpu_deactivate+0x26e/0x2a0 cpuhp_invoke_callback+0x3ad/0x10d0 cpuhp_thread_fun+0x3f5/0x680 smpboot_thread_fn+0x56d/0x8d0 kthread+0x309/0x400 ret_from_fork+0x41/0x70 ret_from_fork_asm+0x1b/0x30 </TASK> Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(), the cpu offline failed, but sched_smt_present is decremented before calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so fix it by incrementing sched_smt_present in the error path.
CVE-2024-44947 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter).
CVE-2024-44934 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: wait for previous gc cycles when removing port syzbot hit a use-after-free[1] which is caused because the bridge doesn't make sure that all previous garbage has been collected when removing a port. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still running Make sure all previous gc cycles have finished by using flush_work before freeing the port. [1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437
CVE-2025-27610 2 Rack, Redhat 4 Rack, Logging, Satellite and 1 more 2025-11-04 7.5 High
Rack provides an interface for developing web applications in Ruby. Prior to versions 2.2.13, 3.0.14, and 3.1.12, `Rack::Static` can serve files under the specified `root:` even if `urls:` are provided, which may expose other files under the specified `root:` unexpectedly. The vulnerability occurs because `Rack::Static` does not properly sanitize user-supplied paths before serving files. Specifically, encoded path traversal sequences are not correctly validated, allowing attackers to access files outside the designated static file directory. By exploiting this vulnerability, an attacker can gain access to all files under the specified `root:` directory, provided they are able to determine then path of the file. Versions 2.2.13, 3.0.14, and 3.1.12 contain a patch for the issue. Other mitigations include removing usage of `Rack::Static`, or ensuring that `root:` points at a directory path which only contains files which should be accessed publicly. It is likely that a CDN or similar static file server would also mitigate the issue.
CVE-2025-27221 2 Redhat, Ruby-lang 2 Enterprise Linux, Uri 2025-11-04 3.2 Low
In the URI gem before 1.0.3 for Ruby, the URI handling methods (URI.join, URI#merge, URI#+) have an inadvertent leakage of authentication credentials because userinfo is retained even after changing the host.
CVE-2025-27220 2 Redhat, Ruby-lang 3 Enterprise Linux, Cgi, Ruby 2025-11-04 4 Medium
In the CGI gem before 0.4.2 for Ruby, a Regular Expression Denial of Service (ReDoS) vulnerability exists in the Util#escapeElement method.
CVE-2025-27219 2 Redhat, Ruby-lang 2 Enterprise Linux, Cgi 2025-11-04 5.8 Medium
In the CGI gem before 0.4.2 for Ruby, the CGI::Cookie.parse method in the CGI library contains a potential Denial of Service (DoS) vulnerability. The method does not impose any limit on the length of the raw cookie value it processes. This oversight can lead to excessive resource consumption when parsing extremely large cookies.
CVE-2025-25184 2 Rack, Redhat 3 Rack, Enterprise Linux, Logging 2025-11-04 6.5 Medium
Rack provides an interface for developing web applications in Ruby. Prior to versions 2.2.11, 3.0.12, and 3.1.10, Rack::CommonLogger can be exploited by crafting input that includes newline characters to manipulate log entries. The supplied proof-of-concept demonstrates injecting malicious content into logs. When a user provides the authorization credentials via Rack::Auth::Basic, if success, the username will be put in env['REMOTE_USER'] and later be used by Rack::CommonLogger for logging purposes. The issue occurs when a server intentionally or unintentionally allows a user creation with the username contain CRLF and white space characters, or the server just want to log every login attempts. If an attacker enters a username with CRLF character, the logger will log the malicious username with CRLF characters into the logfile. Attackers can break log formats or insert fraudulent entries, potentially obscuring real activity or injecting malicious data into log files. Versions 2.2.11, 3.0.12, and 3.1.10 contain a fix.
CVE-2024-43911 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2025-11-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL dereference at band check in starting tx ba session In MLD connection, link_data/link_conf are dynamically allocated. They don't point to vif->bss_conf. So, there will be no chanreq assigned to vif->bss_conf and then the chan will be NULL. Tweak the code to check ht_supported/vht_supported/has_he/has_eht on sta deflink. Crash log (with rtw89 version under MLO development): [ 9890.526087] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 9890.526102] #PF: supervisor read access in kernel mode [ 9890.526105] #PF: error_code(0x0000) - not-present page [ 9890.526109] PGD 0 P4D 0 [ 9890.526114] Oops: 0000 [#1] PREEMPT SMP PTI [ 9890.526119] CPU: 2 PID: 6367 Comm: kworker/u16:2 Kdump: loaded Tainted: G OE 6.9.0 #1 [ 9890.526123] Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018 [ 9890.526126] Workqueue: phy2 rtw89_core_ba_work [rtw89_core] [ 9890.526203] RIP: 0010:ieee80211_start_tx_ba_session (net/mac80211/agg-tx.c:618 (discriminator 1)) mac80211 [ 9890.526279] Code: f7 e8 d5 93 3e ea 48 83 c4 28 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 49 8b 84 24 e0 f1 ff ff 48 8b 80 90 1b 00 00 <83> 38 03 0f 84 37 fe ff ff bb ea ff ff ff eb cc 49 8b 84 24 10 f3 All code ======== 0: f7 e8 imul %eax 2: d5 (bad) 3: 93 xchg %eax,%ebx 4: 3e ea ds (bad) 6: 48 83 c4 28 add $0x28,%rsp a: 89 d8 mov %ebx,%eax c: 5b pop %rbx d: 41 5c pop %r12 f: 41 5d pop %r13 11: 41 5e pop %r14 13: 41 5f pop %r15 15: 5d pop %rbp 16: c3 retq 17: cc int3 18: cc int3 19: cc int3 1a: cc int3 1b: 49 8b 84 24 e0 f1 ff mov -0xe20(%r12),%rax 22: ff 23: 48 8b 80 90 1b 00 00 mov 0x1b90(%rax),%rax 2a:* 83 38 03 cmpl $0x3,(%rax) <-- trapping instruction 2d: 0f 84 37 fe ff ff je 0xfffffffffffffe6a 33: bb ea ff ff ff mov $0xffffffea,%ebx 38: eb cc jmp 0x6 3a: 49 rex.WB 3b: 8b .byte 0x8b 3c: 84 24 10 test %ah,(%rax,%rdx,1) 3f: f3 repz Code starting with the faulting instruction =========================================== 0: 83 38 03 cmpl $0x3,(%rax) 3: 0f 84 37 fe ff ff je 0xfffffffffffffe40 9: bb ea ff ff ff mov $0xffffffea,%ebx e: eb cc jmp 0xffffffffffffffdc 10: 49 rex.WB 11: 8b .byte 0x8b 12: 84 24 10 test %ah,(%rax,%rdx,1) 15: f3 repz [ 9890.526285] RSP: 0018:ffffb8db09013d68 EFLAGS: 00010246 [ 9890.526291] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9308e0d656c8 [ 9890.526295] RDX: 0000000000000000 RSI: ffffffffab99460b RDI: ffffffffab9a7685 [ 9890.526300] RBP: ffffb8db09013db8 R08: 0000000000000000 R09: 0000000000000873 [ 9890.526304] R10: ffff9308e0d64800 R11: 0000000000000002 R12: ffff9308e5ff6e70 [ 9890.526308] R13: ffff930952500e20 R14: ffff9309192a8c00 R15: 0000000000000000 [ 9890.526313] FS: 0000000000000000(0000) GS:ffff930b4e700000(0000) knlGS:0000000000000000 [ 9890.526316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9890.526318] CR2: 0000000000000000 CR3: 0000000391c58005 CR4: 00000000001706f0 [ 9890.526321] Call Trace: [ 9890.526324] <TASK> [ 9890.526327] ? show_regs (arch/x86/kernel/dumpstack.c:479) [ 9890.526335] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 9890.526340] ? page_fault_oops (arch/x86/mm/fault.c:713) [ 9890.526347] ? search_module_extables (kernel/module/main.c:3256 (discriminator ---truncated---