Filtered by CWE-416
Filtered by vendor Subscriptions
Total 7464 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2024-1848 2026-04-15 7.8 High
Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file.
CVE-2025-59734 1 Ffmpeg 1 Ffmpeg 2026-04-15 6.5 Medium
It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2. When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0.  This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false. A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again. Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer. Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb. GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata. This issue can be triggered just by probing whether a file has the sanm format. We recommend upgrading to version 8.0 or beyond.
CVE-2025-0835 2026-04-15 7.8 High
Software installed and run as a non-privileged user may conduct improper GPU system calls to corrupt kernel heap memory.
CVE-2024-46971 2026-04-15 7.8 High
Software installed and run as a non-privileged user may conduct GPU system calls to read and write freed physical memory from the GPU.
CVE-2025-50518 1 Libcoap 1 Libcoap 2026-04-15 9.8 Critical
A use-after-free vulnerability exists in the coap_delete_pdu_lkd function within coap_pdu.c of the libcoap library. This issue occurs due to improper handling of memory after the freeing of a PDU object, leading to potential memory corruption or the possibility of executing arbitrary code. NOTE: this is disputed by the Supplier because it only occurs when an application uses libcoap incorrectly.
CVE-2025-6972 2026-04-15 7.8 High
Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file.
CVE-2025-7042 2026-04-15 7.8 High
Use After Free vulnerability exists in the IPT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted IPT file.
CVE-2025-33220 1 Nvidia 6 Geforce, Quadro, Rtx and 3 more 2026-04-15 7.8 High
NVIDIA vGPU software contains a vulnerability in the Virtual GPU Manager, where a malicious guest could cause heap memory access after the memory is freed. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, or information disclosure.
CVE-2011-10034 1 Irai 1 Automgen 2026-04-15 N/A
AUTOMGEN versions up to and including 8.0.0.7 (also referenced as 8.022) contain a vulnerability in that project file handling frees an object and subsequently dereferences the stale pointer when processing certain malformed fields. The dangling-pointer use enables an attacker to influence an indirect call through attacker-controlled memory, resulting in denial-of-service. In some conditions, remote code execution may be possible.
CVE-2024-31083 1 Redhat 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more 2026-04-15 7.8 High
A use-after-free vulnerability was found in the ProcRenderAddGlyphs() function of Xorg servers. This issue occurs when AllocateGlyph() is called to store new glyphs sent by the client to the X server, potentially resulting in multiple entries pointing to the same non-refcounted glyphs. Consequently, ProcRenderAddGlyphs() may free a glyph, leading to a use-after-free scenario when the same glyph pointer is subsequently accessed. This flaw allows an authenticated attacker to execute arbitrary code on the system by sending a specially crafted request.
CVE-2024-0147 1 Nvidia 1 Gpu Display Driver 2026-04-15 5.5 Medium
NVIDIA GPU display driver for Windows and Linux contains a vulnerability where referencing memory after it has been freed can lead to denial of service or data tampering.
CVE-2024-36353 2026-04-15 6.5 Medium
Insufficient clearing of GPU global memory could allow a malicious process running on the same GPU to read left over memory values potentially leading to loss of confidentiality.
CVE-2024-3187 1 Embedthis 1 Goahead 2026-04-15 5.9 Medium
This issue tracks two CWE-416 Use After Free (UAF) and one CWE-415 Double Free vulnerabilities in Goahead versions <= 6.0.0. These are caused by JST values not being nulled when freed during parsing of JST templates. If the ME_GOAHEAD_JAVASCRIPT flag is enabled, a remote attacker with the privileges to modify JavaScript template (JST) files could exploit this by providing malicious templates. This may lead to memory corruption, potentially causing a Denial of Service (DoS) or, in rare cases, code execution, though the latter is highly context-dependent.
CVE-2025-10729 1 Qt 1 Qt 2026-04-15 8.6 High
The module will parse a <pattern> node which is not a child of a structural node. The node will be deleted after creation but might be accessed later leading to a use after free.
CVE-2025-36854 1 Microsoft 1 .net 2026-04-15 8.1 High
A vulnerability ( CVE-2024-38229 https://www.cve.org/CVERecord ) exists in EOL ASP.NET when closing an HTTP/3 stream while application code is writing to the response body, a race condition may lead to use-after-free, resulting in Remote Code Execution. Per CWE-416: Use After Free https://cwe.mitre.org/data/definitions/416.html , Use After Free is when a product reuses or references memory after it has been freed. At some point afterward, the memory may be allocated again and saved in another pointer, while the original pointer references a location somewhere within the new allocation. Any operations using the original pointer are no longer valid because the memory "belongs" to the code that operates on the new pointer. This issue affects EOL ASP.NET 6.0.0 <= 6.0.36 as represented in this CVE, as well as 8.0.0 <= 8.0.8, 9.0.0-preview.1.24081.5 <= 9.0.0.RC.1 as represented in  CVE-2024-38229 https://www.cve.org/CVERecord . Additionally, if you've deployed self-contained applications https://docs.microsoft.com/dotnet/core/deploying/#self-contained-deployments-scd  targeting any of the impacted versions, these applications are also vulnerable and must be recompiled and redeployed. NOTE: This CVE only represents End Of Life (EOL) software components. The vendor, Microsoft, has indicated there will be no future updates nor support provided upon inquiry.
CVE-2025-48798 1 Redhat 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more 2026-04-15 7.3 High
A flaw was found in GIMP when processing XCF image files. If a user opens one of these image files that has been specially crafted by an attacker, GIMP can be tricked into making serious memory errors, potentially leading to crashes and causing use-after-free issues.
CVE-2025-31115 1 Redhat 1 Enterprise Linux 2026-04-15 7.5 High
XZ Utils provide a general-purpose data-compression library plus command-line tools. In XZ Utils 5.3.3alpha to 5.8.0, the multithreaded .xz decoder in liblzma has a bug where invalid input can at least result in a crash. The effects include heap use after free and writing to an address based on the null pointer plus an offset. Applications and libraries that use the lzma_stream_decoder_mt function are affected. The bug has been fixed in XZ Utils 5.8.1, and the fix has been committed to the v5.4, v5.6, v5.8, and master branches in the xz Git repository. No new release packages will be made from the old stable branches, but a standalone patch is available that applies to all affected releases.
CVE-2023-49676 2026-04-15 5.5 Medium
An unauthenticated local attacker may trick a user to open corrupted project files to crash the system due to use after free vulnerability.
CVE-2024-43703 1 Imaginationtech 1 Ddk 2026-04-15 8.1 High
Software installed and run as a non-privileged user may conduct improper GPU system calls to achieve unauthorised reads and writes of physical memory from the GPU HW.
CVE-2025-3416 1 Redhat 5 Directory Server, Enterprise Linux, Openshift and 2 more 2026-04-15 3.7 Low
A flaw was found in OpenSSL's handling of the properties argument in certain functions. This vulnerability can allow use-after-free exploitation, which may result in undefined behavior or incorrect property parsing, leading to OpenSSL treating the input as an empty string.