ReportizFlow
Filtered by vendor
Subscriptions
Total
3806 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2018-5738 | 2 Canonical, Isc | 2 Ubuntu Linux, Bind | 2024-11-21 | N/A |
| Change #4777 (introduced in October 2017) introduced an unforeseen issue in releases which were issued after that date, affecting which clients are permitted to make recursive queries to a BIND nameserver. The intended (and documented) behavior is that if an operator has not specified a value for the "allow-recursion" setting, it SHOULD default to one of the following: none, if "recursion no;" is set in named.conf; a value inherited from the "allow-query-cache" or "allow-query" settings IF "recursion yes;" (the default for that setting) AND match lists are explicitly set for "allow-query-cache" or "allow-query" (see the BIND9 Administrative Reference Manual section 6.2 for more details); or the intended default of "allow-recursion {localhost; localnets;};" if "recursion yes;" is in effect and no values are explicitly set for "allow-query-cache" or "allow-query". However, because of the regression introduced by change #4777, it is possible when "recursion yes;" is in effect and no match list values are provided for "allow-query-cache" or "allow-query" for the setting of "allow-recursion" to inherit a setting of all hosts from the "allow-query" setting default, improperly permitting recursion to all clients. Affects BIND 9.9.12, 9.10.7, 9.11.3, 9.12.0->9.12.1-P2, the development release 9.13.0, and also releases 9.9.12-S1, 9.10.7-S1, 9.11.3-S1, and 9.11.3-S2 from BIND 9 Supported Preview Edition. | ||||
| CVE-2018-5406 | 1 Quest | 2 Kace Systems Management Appliance, Kace Systems Management Appliance Firmware | 2024-11-21 | 8.8 High |
| The Quest Kace K1000 Appliance, versions prior to 9.0.270, allows a remote attacker to exploit the misconfigured Cross-Origin Resource Sharing (CORS) mechanism. An unauthenticated, remote attacker could exploit this vulnerability to perform sensitive actions such as adding a new administrator account or changing the appliance’s settings. A malicious internal user could also gain administrator privileges of this appliance and use it to visit a malicious link that exploits this vulnerability. This could cause the application to perform sensitive actions such as adding a new administrator account or changing the appliance’s settings. An unauthenticated, remote attacker could add an administrator-level account or change the appliance's settings. | ||||
| CVE-2018-5264 | 1 Ui | 2 Unifi 52, Unifi Firmware | 2024-11-21 | N/A |
| Ubiquiti UniFi 52 devices, when Hotspot mode is used, allow remote attackers to bypass intended restrictions on "free time" Wi-Fi usage by sending a /guest/s/default/ request to obtain a cookie, and then using this cookie in a /guest/s/default/login request with the byfree parameter. | ||||
| CVE-2018-4858 | 1 Siemens | 11 Digsi 4, Digsi 4 Firmware, Digsi 5 and 8 more | 2024-11-21 | 7.8 High |
| A vulnerability has been identified in IEC 61850 system configurator (All versions < V5.80), DIGSI 5 (affected as IEC 61850 system configurator is incorporated) (All versions < V7.80), DIGSI 4 (All versions < V4.93), SICAM PAS/PQS (All versions < V8.11), SICAM PQ Analyzer (All versions < V3.11), SICAM SCC (All versions < V9.02 HF3). A service of the affected products listening on all of the host's network interfaces on either port 4884/TCP, 5885/TCP, or port 5886/TCP could allow an attacker to either exfiltrate limited data from the system or to execute code with Microsoft Windows user permissions. Successful exploitation requires an attacker to be able to send a specially crafted network request to the vulnerable service and a user interacting with the service's client application on the host. In order to execute arbitrary code with Microsoft Windows user permissions, an attacker must be able to plant the code in advance on the host by other means. The vulnerability has limited impact to confidentiality and integrity of the affected system. At the time of advisory publication no public exploitation of this security vulnerability was known. Siemens confirms the security vulnerability and provides mitigations to resolve the security issue. | ||||
| CVE-2018-4845 | 1 Siemens | 6 Rapidlab 1200, Rapidlab 1200 Firmware, Rapidpoint 400 and 3 more | 2024-11-21 | 8.8 High |
| A vulnerability has been identified in RAPIDLab 1200 systems / RAPIDPoint 400 systems / RAPIDPoint 500 systems (All versions_without_ use of Siemens Healthineers Informatics products), RAPIDLab 1200 Series (All versions < V3.3 _with_ Siemens Healthineers Informatics products), RAPIDPoint 500 systems (All versions >= V3.0 _with_ Siemens Healthineers Informatics products), RAPIDPoint 500 systems (V2.4.X_with_ Siemens Healthineers Informatics products), RAPIDPoint 500 systems (All versions =< V2.3 _with_ Siemens Healthineers Informatics products), RAPIDPoint 400 systems (All versions _with_ Siemens Healthineers Informatics products). Remote attackers with either local or remote credentialed access to the "Remote View" feature might be able to elevate their privileges, compromising confidentiality, integrity, and availability of the system. No special skills or user interaction are required to perform this attack. At the time of advisory publication, no public exploitation of this security vulnerability is known. Siemens Healthineers confirms the security vulnerability and provides mitigations to resolve the security issue. | ||||
| CVE-2018-4844 | 1 Siemens | 1 Simatic Wincc Oa Ui | 2024-11-21 | 6.7 Medium |
| A vulnerability has been identified in SIMATIC WinCC OA UI for Android (All versions < V3.15.10), SIMATIC WinCC OA UI for iOS (All versions < V3.15.10). Insufficient limitation of CONTROL script capabilities could allow read and write access from one HMI project cache folder to other HMI project cache folders within the app's sandbox on the same mobile device. This includes HMI project cache folders of other configured WinCC OA servers. The security vulnerability could be exploited by an attacker who tricks an app user to connect to an attacker-controlled WinCC OA server. Successful exploitation requires user interaction and read/write access to the app's folder on a mobile device. The vulnerability could allow reading data from and writing data to the app's folder. At the time of advisory publication no public exploitation of this security vulnerability was known. Siemens confirms the security vulnerability and provides mitigations to resolve the security issue. | ||||
| CVE-2018-3762 | 1 Nextcloud | 1 Nextcloud Server | 2024-11-21 | 4.3 Medium |
| Nextcloud Server before 12.0.8 and 13.0.3 suffers from improper checks of dropped permissions for incoming shares allowing a user to still request previews for files it should not have access to. | ||||
| CVE-2018-3183 | 5 Canonical, Debian, Hp and 2 more | 18 Ubuntu Linux, Debian Linux, Xp7 Command View and 15 more | 2024-11-21 | 9.0 Critical |
| Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: Scripting). Supported versions that are affected are Java SE: 8u182 and 11; Java SE Embedded: 8u181; JRockit: R28.3.19. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded, JRockit. While the vulnerability is in Java SE, Java SE Embedded, JRockit, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Java SE, Java SE Embedded, JRockit. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets (in Java SE 8), that load and run untrusted code (e.g. code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g. through a web service which supplies data to the APIs. CVSS 3.0 Base Score 9.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:H/A:H). | ||||
| CVE-2018-3169 | 5 Canonical, Debian, Hp and 2 more | 17 Ubuntu Linux, Debian Linux, Xp7 Command View and 14 more | 2024-11-21 | 8.3 High |
| Vulnerability in the Java SE, Java SE Embedded component of Oracle Java SE (subcomponent: Hotspot). Supported versions that are affected are Java SE: 7u191, 8u182 and 11; Java SE Embedded: 8u181. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Java SE, Java SE Embedded, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in takeover of Java SE, Java SE Embedded. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets (in Java SE 8), that load and run untrusted code (e.g. code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g. code installed by an administrator). CVSS 3.0 Base Score 8.3 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:R/S:C/C:H/I:H/A:H). | ||||
| CVE-2018-2634 | 6 Canonical, Debian, Hp and 3 more | 19 Ubuntu Linux, Debian Linux, Xp7 Command View and 16 more | 2024-11-21 | 6.8 Medium |
| Vulnerability in the Java SE, Java SE Embedded component of Oracle Java SE (subcomponent: JGSS). Supported versions that are affected are Java SE: 7u161, 8u152 and 9.0.1; Java SE Embedded: 8u151. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded. While the vulnerability is in Java SE, Java SE Embedded, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Java SE, Java SE Embedded accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.0 Base Score 6.8 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:N/A:N). | ||||
| CVE-2018-25093 | 1 Vaerys-dawn | 1 Discordsailv2 | 2024-11-21 | 5.5 Medium |
| A vulnerability was found in Vaerys-Dawn DiscordSailv2 up to 2.10.2. It has been rated as critical. Affected by this issue is some unknown functionality of the component Tag Handler. The manipulation leads to improper access controls. Upgrading to version 2.10.3 is able to address this issue. The name of the patch is cc12e0be82a5d05d9f359ed8e56088f4f8b8eb69. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-244484. | ||||
| CVE-2018-25092 | 1 Vaerys-dawn | 1 Discordsailv2 | 2024-11-21 | 5.5 Medium |
| A vulnerability was found in Vaerys-Dawn DiscordSailv2 up to 2.10.2. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component Command Mention Handler. The manipulation leads to improper access controls. Upgrading to version 2.10.3 is able to address this issue. The patch is named cc12e0be82a5d05d9f359ed8e56088f4f8b8eb69. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-244483. | ||||
| CVE-2018-21007 | 1 Wisetr | 1 User Email Verification For Woocommerce | 2024-11-21 | N/A |
| The woo-confirmation-email plugin before 3.2.0 for WordPress has no blocking of direct access to supportive xl folders inside uploads. | ||||
| CVE-2018-20957 | 1 Tapplock | 2 One\+, One\+ Firmware | 2024-11-21 | N/A |
| The Bluetooth Low Energy (BLE) subsystem on Tapplock devices before 2018-06-12 allows replay attacks. | ||||
| CVE-2018-20938 | 1 Cpanel | 1 Cpanel | 2024-11-21 | N/A |
| cPanel before 68.0.27 does not enforce ownership during addpkgext and delpkgext WHM API calls (SEC-324). | ||||
| CVE-2018-20930 | 1 Cpanel | 1 Cpanel | 2024-11-21 | N/A |
| cPanel before 70.0.23 allows .htaccess restrictions bypass when Htaccess Optimization is enabled (SEC-401). | ||||
| CVE-2018-20890 | 1 Cpanel | 1 Cpanel | 2024-11-21 | N/A |
| cPanel before 74.0.0 allows arbitrary zone file modifications during record edits (SEC-426). | ||||
| CVE-2018-1305 | 5 Apache, Canonical, Debian and 2 more | 10 Tomcat, Ubuntu Linux, Debian Linux and 7 more | 2024-11-21 | N/A |
| Security constraints defined by annotations of Servlets in Apache Tomcat 9.0.0.M1 to 9.0.4, 8.5.0 to 8.5.27, 8.0.0.RC1 to 8.0.49 and 7.0.0 to 7.0.84 were only applied once a Servlet had been loaded. Because security constraints defined in this way apply to the URL pattern and any URLs below that point, it was possible - depending on the order Servlets were loaded - for some security constraints not to be applied. This could have exposed resources to users who were not authorised to access them. | ||||
| CVE-2018-1304 | 5 Apache, Canonical, Debian and 2 more | 13 Tomcat, Ubuntu Linux, Debian Linux and 10 more | 2024-11-21 | N/A |
| The URL pattern of "" (the empty string) which exactly maps to the context root was not correctly handled in Apache Tomcat 9.0.0.M1 to 9.0.4, 8.5.0 to 8.5.27, 8.0.0.RC1 to 8.0.49 and 7.0.0 to 7.0.84 when used as part of a security constraint definition. This caused the constraint to be ignored. It was, therefore, possible for unauthorised users to gain access to web application resources that should have been protected. Only security constraints with a URL pattern of the empty string were affected. | ||||
| CVE-2018-1168 | 1 Hitachienergy | 2 Sys600, Sys600 Firmware | 2024-11-21 | N/A |
| This vulnerability allows local attackers to escalate privileges on vulnerable installations of ABB MicroSCADA 9.3 with FP 1-2-3. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the configuration of the access controls for the installed product files. The installation procedure leaves critical files open to manipulation by any authenticated user. An attacker can leverage this vulnerability to escalate privileges to SYSTEM. Was ZDI-CAN-5097. | ||||