In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE (256-byte) bounce buffer obtained from dma_pool_alloc(), which does not zero the allocation. They initialize only a few leading bytes before handing the buffer to qla2x00_write_sfp(). qla2x00_write_sfp() can override the transfer length with a user-supplied value: if (len == 1) opt |= BIT_0; if (opt & BIT_0) len = *sfp; *sfp is the first byte of the (user-controlled) payload, so len can grow up to 255. The device then DMA-reads len bytes from the 256-byte pool buffer. Since only a small prefix was written (e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU status register), the hardware reads past the initialized region and writes up to ~219 bytes of stale DMA-pool heap memory to the device flash. Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers so any bytes beyond the initialized data are zero rather than stale heap contents.
History

Wed, 16 Sep 2026 10:45:00 +0000

Type Values Removed Values Added
Description In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE (256-byte) bounce buffer obtained from dma_pool_alloc(), which does not zero the allocation. They initialize only a few leading bytes before handing the buffer to qla2x00_write_sfp(). qla2x00_write_sfp() can override the transfer length with a user-supplied value: if (len == 1) opt |= BIT_0; if (opt & BIT_0) len = *sfp; *sfp is the first byte of the (user-controlled) payload, so len can grow up to 255. The device then DMA-reads len bytes from the 256-byte pool buffer. Since only a small prefix was written (e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU status register), the hardware reads past the initialized region and writes up to ~219 bytes of stale DMA-pool heap memory to the device flash. Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers so any bytes beyond the initialized data are zero rather than stale heap contents.
Title scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers
First Time appeared Linux
Linux linux Kernel
CPEs cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
Vendors & Products Linux
Linux linux Kernel
References

cve-icon MITRE

Status: PUBLISHED

Assigner: Linux

Published: 2026-09-16T10:31:35.758Z

Updated: 2026-10-19T08:53:58.579Z

Reserved: 2026-09-11T19:38:34.771Z

Link: CVE-2026-89865

cve-icon Vulnrichment

No data.

cve-icon NVD

Status : Received

Published: 2026-09-16T11:16:54.610

Modified: 2026-10-19T09:18:31.147

Link: CVE-2026-89865

cve-icon Redhat

No data.