In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: fix invalid FIFO access with special register set
When enabling access to the special register set, Receiver time-out and
RHR interrupts can happen. In this case, the IRQ handler will try to read
from the FIFO thru the RHR register at address 0x00, but address 0x00 is
mapped to DLL register, resulting in erroneous FIFO reading.
Call graph example:
sc16is7xx_startup(): entry
sc16is7xx_ms_proc(): entry
sc16is7xx_set_termios(): entry
sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set
sc16is7xx_port_irq() entry --> IIR is 0x0C
sc16is7xx_handle_rx() entry
sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is
mapped to DLL (LCR=LCR_CONF_MODE_A)
sc16is7xx_set_baud(): exit --> Restore access to general register set
Fix the problem by claiming the efr_lock mutex when accessing the Special
register set.
Metrics
Affected Vendors & Products
References
History
Sat, 14 Dec 2024 21:00:00 +0000
Type | Values Removed | Values Added |
---|---|---|
References |
|
Mon, 09 Dec 2024 10:45:00 +0000
Type | Values Removed | Values Added |
---|---|---|
References |
|
Wed, 09 Oct 2024 14:45:00 +0000
Type | Values Removed | Values Added |
---|---|---|
First Time appeared |
Linux
Linux linux Kernel |
|
Weaknesses | CWE-668 NVD-CWE-noinfo |
|
CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* cpe:2.3:o:linux:linux_kernel:6.11:rc1:*:*:*:*:*:* cpe:2.3:o:linux:linux_kernel:6.11:rc2:*:*:*:*:*:* |
|
Vendors & Products |
Linux
Linux linux Kernel |
Wed, 11 Sep 2024 13:30:00 +0000
Type | Values Removed | Values Added |
---|---|---|
Metrics |
ssvc
|
Wed, 04 Sep 2024 23:30:00 +0000
Type | Values Removed | Values Added |
---|---|---|
References |
| |
Metrics |
threat_severity
|
cvssV3_1
|
Wed, 04 Sep 2024 18:45:00 +0000
Type | Values Removed | Values Added |
---|---|---|
Description | In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entry sc16is7xx_set_termios(): entry sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set sc16is7xx_port_irq() entry --> IIR is 0x0C sc16is7xx_handle_rx() entry sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is mapped to DLL (LCR=LCR_CONF_MODE_A) sc16is7xx_set_baud(): exit --> Restore access to general register set Fix the problem by claiming the efr_lock mutex when accessing the Special register set. | |
Title | serial: sc16is7xx: fix invalid FIFO access with special register set | |
References |
|
MITRE
Status: PUBLISHED
Assigner: Linux
Published: 2024-09-04T18:35:50.602Z
Updated: 2024-12-19T09:18:59.037Z
Reserved: 2024-08-21T05:34:56.665Z
Link: CVE-2024-44950
Vulnrichment
Updated: 2024-09-11T12:42:27.682Z
NVD
Status : Modified
Published: 2024-09-04T19:15:30.100
Modified: 2024-12-14T21:15:24.140
Link: CVE-2024-44950
Redhat