{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2021-47393", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-05-21T14:58:30.814Z", "datePublished": "2024-05-21T15:03:50.844Z", "dateUpdated": "2024-12-19T07:41:08.499Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2024-12-19T07:41:08.499Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nhwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs\n\nFan speed minimum can be enforced from sysfs. For example, setting\ncurrent fan speed to 20 is used to enforce fan speed to be at 100%\nspeed, 19 - to be not below 90% speed, etcetera. This feature provides\nability to limit fan speed according to some system wise\nconsiderations, like absence of some replaceable units or high system\nambient temperature.\n\nRequest for changing fan minimum speed is configuration request and can\nbe set only through 'sysfs' write procedure. In this situation value of\nargument 'state' is above nominal fan speed maximum.\n\nReturn non-zero code in this case to avoid\nthermal_cooling_device_stats_update() call, because in this case\nstatistics update violates thermal statistics table range.\nThe issues is observed in case kernel is configured with option\nCONFIG_THERMAL_STATISTICS.\n\nHere is the trace from KASAN:\n[ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0\n[ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444\n[ 159.545625] Call Trace:\n[ 159.548366] dump_stack+0x92/0xc1\n[ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0\n[ 159.635869] thermal_zone_device_update+0x345/0x780\n[ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0\n[ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core]\n[ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core]\n[ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core]\n[ 160.070233] RIP: 0033:0x7fd995909970\n[ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ..\n[ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001\n[ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970\n[ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001\n[ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700\n[ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013\n[ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013\n[ 160.143671]\n[ 160.145338] Allocated by task 2924:\n[ 160.149242] kasan_save_stack+0x19/0x40\n[ 160.153541] __kasan_kmalloc+0x7f/0xa0\n[ 160.157743] __kmalloc+0x1a2/0x2b0\n[ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0\n[ 160.167687] __thermal_cooling_device_register+0x1b5/0x500\n[ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0\n[ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan]\n[ 160.248140]\n[ 160.249807] The buggy address belongs to the object at ffff888116163400\n[ 160.249807] which belongs to the cache kmalloc-1k of size 1024\n[ 160.263814] The buggy address is located 64 bytes to the right of\n[ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800)\n[ 160.277536] The buggy address belongs to the page:\n[ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160\n[ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0\n[ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2)\n[ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0\n[ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000\n[ 160.327033] page dumped because: kasan: bad access detected\n[ 160.333270]\n[ 160.334937] Memory state around the buggy address:\n[ 160.356469] >ffff888116163800: fc .."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/hwmon/mlxreg-fan.c"], "versions": [{"version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "5c6e0bce647d9cb32a17d58ffa669b3421fcc6ca", "status": "affected", "versionType": "git"}, {"version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "a6c42ae1530f94724d3c42cf91fe3d3c5e394f8a", "status": "affected", "versionType": "git"}, {"version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "76bbb482d33bfcd7e9070ecf594c9ec73e01c930", "status": "affected", "versionType": "git"}, {"version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "aa85fb7bde558bb2e364e85976b14b259c8b6fe8", "status": "affected", "versionType": "git"}, {"version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "e6fab7af6ba1bc77c78713a83876f60ca7a4a064", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/hwmon/mlxreg-fan.c"], "versions": [{"version": "4.19", "status": "affected"}, {"version": "0", "lessThan": "4.19", "status": "unaffected", "versionType": "semver"}, {"version": "4.19.209", "lessThanOrEqual": "4.19.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.4.151", "lessThanOrEqual": "5.4.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.10.71", "lessThanOrEqual": "5.10.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.14.10", "lessThanOrEqual": "5.14.*", "status": "unaffected", "versionType": "semver"}, {"version": "5.15", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "references": [{"url": "https://git.kernel.org/stable/c/5c6e0bce647d9cb32a17d58ffa669b3421fcc6ca"}, {"url": "https://git.kernel.org/stable/c/a6c42ae1530f94724d3c42cf91fe3d3c5e394f8a"}, {"url": "https://git.kernel.org/stable/c/76bbb482d33bfcd7e9070ecf594c9ec73e01c930"}, {"url": "https://git.kernel.org/stable/c/aa85fb7bde558bb2e364e85976b14b259c8b6fe8"}, {"url": "https://git.kernel.org/stable/c/e6fab7af6ba1bc77c78713a83876f60ca7a4a064"}], "title": "hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs", "x_generator": {"engine": "bippy-5f407fcff5a0"}}, "adp": [{"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2021-47393", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-05-21T18:20:58.398559Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-06-04T17:13:55.155Z"}}, {"providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-04T05:39:59.728Z"}, "title": "CVE Program Container", "references": [{"url": "https://git.kernel.org/stable/c/5c6e0bce647d9cb32a17d58ffa669b3421fcc6ca", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/a6c42ae1530f94724d3c42cf91fe3d3c5e394f8a", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/76bbb482d33bfcd7e9070ecf594c9ec73e01c930", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/aa85fb7bde558bb2e364e85976b14b259c8b6fe8", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/e6fab7af6ba1bc77c78713a83876f60ca7a4a064", "tags": ["x_transferred"]}]}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CVE Program Container", "references": [{"url": "https://git.kernel.org/stable/c/5c6e0bce647d9cb32a17d58ffa669b3421fcc6ca", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/a6c42ae1530f94724d3c42cf91fe3d3c5e394f8a", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/76bbb482d33bfcd7e9070ecf594c9ec73e01c930", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/aa85fb7bde558bb2e364e85976b14b259c8b6fe8", "tags": ["x_transferred"]}, {"url": "https://git.kernel.org/stable/c/e6fab7af6ba1bc77c78713a83876f60ca7a4a064", "tags": ["x_transferred"]}], "providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-04T05:39:59.728Z"}}, {"metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2021-47393", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-05-21T18:20:58.398559Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-05-23T19:01:25.411Z"}, "title": "CISA ADP Vulnrichment"}], "cna": {"title": "hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs", "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "5c6e0bce647d9cb32a17d58ffa669b3421fcc6ca", "versionType": "git"}, {"status": "affected", "version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "a6c42ae1530f94724d3c42cf91fe3d3c5e394f8a", "versionType": "git"}, {"status": "affected", "version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "76bbb482d33bfcd7e9070ecf594c9ec73e01c930", "versionType": "git"}, {"status": "affected", "version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "aa85fb7bde558bb2e364e85976b14b259c8b6fe8", "versionType": "git"}, {"status": "affected", "version": "65afb4c8e7e4e7e74b28efa1df62da503ca3e7a6", "lessThan": "e6fab7af6ba1bc77c78713a83876f60ca7a4a064", "versionType": "git"}], "programFiles": ["drivers/hwmon/mlxreg-fan.c"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "4.19"}, {"status": "unaffected", "version": "0", "lessThan": "4.19", "versionType": "semver"}, {"status": "unaffected", "version": "4.19.209", "versionType": "semver", "lessThanOrEqual": "4.19.*"}, {"status": "unaffected", "version": "5.4.151", "versionType": "semver", "lessThanOrEqual": "5.4.*"}, {"status": "unaffected", "version": "5.10.71", "versionType": "semver", "lessThanOrEqual": "5.10.*"}, {"status": "unaffected", "version": "5.14.10", "versionType": "semver", "lessThanOrEqual": "5.14.*"}, {"status": "unaffected", "version": "5.15", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["drivers/hwmon/mlxreg-fan.c"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/5c6e0bce647d9cb32a17d58ffa669b3421fcc6ca"}, {"url": "https://git.kernel.org/stable/c/a6c42ae1530f94724d3c42cf91fe3d3c5e394f8a"}, {"url": "https://git.kernel.org/stable/c/76bbb482d33bfcd7e9070ecf594c9ec73e01c930"}, {"url": "https://git.kernel.org/stable/c/aa85fb7bde558bb2e364e85976b14b259c8b6fe8"}, {"url": "https://git.kernel.org/stable/c/e6fab7af6ba1bc77c78713a83876f60ca7a4a064"}], "x_generator": {"engine": "bippy-5f407fcff5a0"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nhwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs\n\nFan speed minimum can be enforced from sysfs. For example, setting\ncurrent fan speed to 20 is used to enforce fan speed to be at 100%\nspeed, 19 - to be not below 90% speed, etcetera. This feature provides\nability to limit fan speed according to some system wise\nconsiderations, like absence of some replaceable units or high system\nambient temperature.\n\nRequest for changing fan minimum speed is configuration request and can\nbe set only through 'sysfs' write procedure. In this situation value of\nargument 'state' is above nominal fan speed maximum.\n\nReturn non-zero code in this case to avoid\nthermal_cooling_device_stats_update() call, because in this case\nstatistics update violates thermal statistics table range.\nThe issues is observed in case kernel is configured with option\nCONFIG_THERMAL_STATISTICS.\n\nHere is the trace from KASAN:\n[ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0\n[ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444\n[ 159.545625] Call Trace:\n[ 159.548366] dump_stack+0x92/0xc1\n[ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0\n[ 159.635869] thermal_zone_device_update+0x345/0x780\n[ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0\n[ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core]\n[ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core]\n[ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core]\n[ 160.070233] RIP: 0033:0x7fd995909970\n[ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ..\n[ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001\n[ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970\n[ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001\n[ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700\n[ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013\n[ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013\n[ 160.143671]\n[ 160.145338] Allocated by task 2924:\n[ 160.149242] kasan_save_stack+0x19/0x40\n[ 160.153541] __kasan_kmalloc+0x7f/0xa0\n[ 160.157743] __kmalloc+0x1a2/0x2b0\n[ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0\n[ 160.167687] __thermal_cooling_device_register+0x1b5/0x500\n[ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0\n[ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan]\n[ 160.248140]\n[ 160.249807] The buggy address belongs to the object at ffff888116163400\n[ 160.249807] which belongs to the cache kmalloc-1k of size 1024\n[ 160.263814] The buggy address is located 64 bytes to the right of\n[ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800)\n[ 160.277536] The buggy address belongs to the page:\n[ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160\n[ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0\n[ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2)\n[ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0\n[ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000\n[ 160.327033] page dumped because: kasan: bad access detected\n[ 160.333270]\n[ 160.334937] Memory state around the buggy address:\n[ 160.356469] >ffff888116163800: fc .."}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2024-12-19T07:41:08.499Z"}}}, "cveMetadata": {"cveId": "CVE-2021-47393", "state": "PUBLISHED", "dateUpdated": "2024-12-19T07:41:08.499Z", "dateReserved": "2024-05-21T14:58:30.814Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2024-05-21T15:03:50.844Z", "assignerShortName": "Linux"}, "dataVersion": "5.1"}

{"descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nhwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs\n\nFan speed minimum can be enforced from sysfs. For example, setting\ncurrent fan speed to 20 is used to enforce fan speed to be at 100%\nspeed, 19 - to be not below 90% speed, etcetera. This feature provides\nability to limit fan speed according to some system wise\nconsiderations, like absence of some replaceable units or high system\nambient temperature.\n\nRequest for changing fan minimum speed is configuration request and can\nbe set only through 'sysfs' write procedure. In this situation value of\nargument 'state' is above nominal fan speed maximum.\n\nReturn non-zero code in this case to avoid\nthermal_cooling_device_stats_update() call, because in this case\nstatistics update violates thermal statistics table range.\nThe issues is observed in case kernel is configured with option\nCONFIG_THERMAL_STATISTICS.\n\nHere is the trace from KASAN:\n[ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0\n[ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444\n[ 159.545625] Call Trace:\n[ 159.548366] dump_stack+0x92/0xc1\n[ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0\n[ 159.635869] thermal_zone_device_update+0x345/0x780\n[ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0\n[ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core]\n[ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core]\n[ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core]\n[ 160.070233] RIP: 0033:0x7fd995909970\n[ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ..\n[ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001\n[ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970\n[ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001\n[ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700\n[ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013\n[ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013\n[ 160.143671]\n[ 160.145338] Allocated by task 2924:\n[ 160.149242] kasan_save_stack+0x19/0x40\n[ 160.153541] __kasan_kmalloc+0x7f/0xa0\n[ 160.157743] __kmalloc+0x1a2/0x2b0\n[ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0\n[ 160.167687] __thermal_cooling_device_register+0x1b5/0x500\n[ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0\n[ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan]\n[ 160.248140]\n[ 160.249807] The buggy address belongs to the object at ffff888116163400\n[ 160.249807] which belongs to the cache kmalloc-1k of size 1024\n[ 160.263814] The buggy address is located 64 bytes to the right of\n[ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800)\n[ 160.277536] The buggy address belongs to the page:\n[ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160\n[ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0\n[ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2)\n[ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0\n[ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000\n[ 160.327033] page dumped because: kasan: bad access detected\n[ 160.333270]\n[ 160.334937] Memory state around the buggy address:\n[ 160.356469] >ffff888116163800: fc .."}, {"lang": "es", "value": "En el kernel de Linux, se resolvi\u00f3 la siguiente vulnerabilidad: hwmon: (mlxreg-fan) Devuelve un valor distinto de cero cuando el estado actual del ventilador se aplica desde sysfs. La velocidad m\u00ednima del ventilador se puede aplicar desde sysfs. Por ejemplo, configurar la velocidad actual del ventilador en 20 se utiliza para hacer que la velocidad del ventilador est\u00e9 al 100 %, 19, para que no est\u00e9 por debajo del 90 %, etc\u00e9tera. Esta caracter\u00edstica brinda la capacidad de limitar la velocidad del ventilador de acuerdo con algunas consideraciones del sistema, como la ausencia de algunas unidades reemplazables o la alta temperatura ambiente del sistema. La solicitud para cambiar la velocidad m\u00ednima del ventilador es una solicitud de configuraci\u00f3n y solo se puede configurar mediante el procedimiento de escritura 'sysfs'. En esta situaci\u00f3n, el valor del argumento \"estado\" est\u00e1 por encima de la velocidad m\u00e1xima nominal del ventilador. En este caso, devuelva un c\u00f3digo distinto de cero para evitar la llamada a Thermal_cooling_device_stats_update(), porque en este caso la actualizaci\u00f3n de estad\u00edsticas viola el rango de la tabla de estad\u00edsticas t\u00e9rmicas. Los problemas se observan en caso de que el kernel est\u00e9 configurado con la opci\u00f3n CONFIG_THERMAL_STATISTICS. Aqu\u00ed est\u00e1 el rastro de KASAN: [159.506659] ERROR: KASAN: slab fuera de los l\u00edmites en Thermal_cooling_device_stats_update+0x7d/0xb0 [159.516016] Lectura de tama\u00f1o 4 en la direcci\u00f3n ffff888116163840 mediante la tarea hw-management.s/7444 [ 625] Llamada Seguimiento: [159.548366] dump_stack+0x92/0xc1 [159.552084]? Thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] Thermal_zone_device_update+0x345/0x780 [ 159.688711] Thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f /0x590 [mlxsw_core] [159.700972]? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.07423 9] C\u00f3digo: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 &lt;48&gt; 3d 01 f0 ff .. [ 160.095242] RSP: 00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 00000000000000013 RSI: 0000000001906008 RDI: 000000000000 0001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 000000246 R12: 00000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Asignado por tarea 2924: [ 160.149242] x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] Thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160. 248140] [160.249807] La direcci\u00f3n con errores pertenece al objeto en ffff888116163400 [160.249807] que pertenece al cach\u00e9 kmalloc-1k de tama\u00f1o 1024 [ 160.263814] La direcci\u00f3n con errores se encuentra 64 bytes a la derecha de [ 160.263814] Regi\u00f3n de 1024 bytes [ffff888116163400, ffff888116163800) [ 160.277536] La direcci\u00f3n con errores pertenece a la p\u00e1gina: [ 160.2 82898] p\u00e1gina:0000000012275840 refcount :1 mapcount:0 mapeo:0000000000000000 \u00edndice:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 orden:3 compuesto_mapcount:0 compuesto_pincount:0 [ 160.303251] banderas: 00000010200(slab|cabeza|nodo=0|zona=2) [ 160.309694 ] sin formato: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] sin formato: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [160.327033] p\u00e1gina volcada porque: kasan: mal acceso detectado [160.333270] [160.334937] Estado de la memoria alrededor de la direcci\u00f3n con errores: [160.356469] &gt;ffff888116163800: fc .."}], "id": "CVE-2021-47393", "lastModified": "2024-11-21T06:36:03.193", "metrics": {}, "published": "2024-05-21T15:15:24.627", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/5c6e0bce647d9cb32a17d58ffa669b3421fcc6ca"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/76bbb482d33bfcd7e9070ecf594c9ec73e01c930"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/a6c42ae1530f94724d3c42cf91fe3d3c5e394f8a"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/aa85fb7bde558bb2e364e85976b14b259c8b6fe8"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/e6fab7af6ba1bc77c78713a83876f60ca7a4a064"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/5c6e0bce647d9cb32a17d58ffa669b3421fcc6ca"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/76bbb482d33bfcd7e9070ecf594c9ec73e01c930"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/a6c42ae1530f94724d3c42cf91fe3d3c5e394f8a"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/aa85fb7bde558bb2e364e85976b14b259c8b6fe8"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://git.kernel.org/stable/c/e6fab7af6ba1bc77c78713a83876f60ca7a4a064"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Awaiting Analysis"}

{"affected_release": [{"advisory": "RHSA-2024:7001", "cpe": "cpe:/a:redhat:enterprise_linux:8::nfv", "package": "kernel-rt-0:4.18.0-553.22.1.rt7.363.el8_10", "product_name": "Red Hat Enterprise Linux 8", "release_date": "2024-09-24T00:00:00Z"}, {"advisory": "RHSA-2024:7000", "cpe": "cpe:/o:redhat:enterprise_linux:8", "package": "kernel-0:4.18.0-553.22.1.el8_10", "product_name": "Red Hat Enterprise Linux 8", "release_date": "2024-09-24T00:00:00Z"}, {"advisory": "RHSA-2024:5065", "cpe": "cpe:/o:redhat:rhel_aus:8.6", "package": "kernel-0:4.18.0-372.115.1.el8_6", "product_name": "Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support", "release_date": "2024-08-07T00:00:00Z"}, {"advisory": "RHSA-2024:5065", "cpe": "cpe:/o:redhat:rhel_tus:8.6", "package": "kernel-0:4.18.0-372.115.1.el8_6", "product_name": "Red Hat Enterprise Linux 8.6 Telecommunications Update Service", "release_date": "2024-08-07T00:00:00Z"}, {"advisory": "RHSA-2024:5065", "cpe": "cpe:/o:redhat:rhel_e4s:8.6", "package": "kernel-0:4.18.0-372.115.1.el8_6", "product_name": "Red Hat Enterprise Linux 8.6 Update Services for SAP Solutions", "release_date": "2024-08-07T00:00:00Z"}, {"advisory": "RHSA-2024:10262", "cpe": "cpe:/o:redhat:rhel_eus:8.8", "package": "kernel-0:4.18.0-477.81.1.el8_8", "product_name": "Red Hat Enterprise Linux 8.8 Extended Update Support", "release_date": "2024-11-26T00:00:00Z"}, {"advisory": "RHSA-2024:6991", "cpe": "cpe:/a:redhat:rhel_e4s:9.0", "package": "kernel-0:5.14.0-70.117.1.el9_0", "product_name": "Red Hat Enterprise Linux 9.0 Update Services for SAP Solutions", "release_date": "2024-09-24T00:00:00Z"}, {"advisory": "RHSA-2024:6990", "cpe": "cpe:/a:redhat:rhel_e4s:9.0::nfv", "package": "kernel-rt-0:5.14.0-70.117.1.rt21.189.el9_0", "product_name": "Red Hat Enterprise Linux 9.0 Update Services for SAP Solutions", "release_date": "2024-09-24T00:00:00Z"}], "bugzilla": {"description": "kernel: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs", "id": "2282345", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2282345"}, "csaw": false, "cvss3": {"cvss3_base_score": "4.7", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H", "status": "verified"}, "cwe": "CWE-754", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nhwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs\nFan speed minimum can be enforced from sysfs. For example, setting\ncurrent fan speed to 20 is used to enforce fan speed to be at 100%\nspeed, 19 - to be not below 90% speed, etcetera. This feature provides\nability to limit fan speed according to some system wise\nconsiderations, like absence of some replaceable units or high system\nambient temperature.\nRequest for changing fan minimum speed is configuration request and can\nbe set only through 'sysfs' write procedure. In this situation value of\nargument 'state' is above nominal fan speed maximum.\nReturn non-zero code in this case to avoid\nthermal_cooling_device_stats_update() call, because in this case\nstatistics update violates thermal statistics table range.\nThe issues is observed in case kernel is configured with option\nCONFIG_THERMAL_STATISTICS.\nHere is the trace from KASAN:\n[ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0\n[ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444\n[ 159.545625] Call Trace:\n[ 159.548366] dump_stack+0x92/0xc1\n[ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0\n[ 159.635869] thermal_zone_device_update+0x345/0x780\n[ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0\n[ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core]\n[ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core]\n[ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core]\n[ 160.070233] RIP: 0033:0x7fd995909970\n[ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ..\n[ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001\n[ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970\n[ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001\n[ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700\n[ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013\n[ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013\n[ 160.143671]\n[ 160.145338] Allocated by task 2924:\n[ 160.149242] kasan_save_stack+0x19/0x40\n[ 160.153541] __kasan_kmalloc+0x7f/0xa0\n[ 160.157743] __kmalloc+0x1a2/0x2b0\n[ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0\n[ 160.167687] __thermal_cooling_device_register+0x1b5/0x500\n[ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0\n[ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan]\n[ 160.248140]\n[ 160.249807] The buggy address belongs to the object at ffff888116163400\n[ 160.249807] which belongs to the cache kmalloc-1k of size 1024\n[ 160.263814] The buggy address is located 64 bytes to the right of\n[ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800)\n[ 160.277536] The buggy address belongs to the page:\n[ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160\n[ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0\n[ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2)\n[ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0\n[ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000\n[ 160.327033] page dumped because: kasan: bad access detected\n[ 160.333270]\n[ 160.334937] Memory state around the buggy address:\n[ 160.356469] >ffff888116163800: fc .."], "mitigation": {"lang": "en:us", "value": "Red Hat has investigated whether a possible mitigation exists for this issue, and has not been able to identify a practical example. Please update the affected package as soon as possible."}, "name": "CVE-2021-47393", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2024-05-21T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2021-47393\nhttps://nvd.nist.gov/vuln/detail/CVE-2021-47393\nhttps://lore.kernel.org/linux-cve-announce/2024052147-CVE-2021-47393-ea1c@gregkh/T"], "statement": "This vulnerability is rated as a moderate severity because it can disrupt system operation by causing crashes or unpredictable behaviour under specific conditions.", "threat_severity": "Moderate", "upstream_fix": "kernel 4.19.209, kernel 5.4.151, kernel 5.10.71, kernel 5.14.10, kernel 5.15"}