{"containers": {"cna": {"affected": [{"product": "Cisco AMP for Endpoints", "vendor": "Cisco", "versions": [{"status": "affected", "version": "n/a"}]}], "datePublic": "2018-10-29T00:00:00", "descriptions": [{"lang": "en", "value": "A vulnerability in the DLL loading component of Cisco Advanced Malware Protection (AMP) for Endpoints on Windows could allow an authenticated, local attacker to disable system scanning services or take other actions to prevent detection of unauthorized intrusions. To exploit this vulnerability, the attacker would need to have administrative credentials on the Windows system. The vulnerability is due to the improper validation of resources loaded by a system process at run time. An attacker could exploit this vulnerability by crafting a malicious DLL file and placing it in a specific location on the targeted system. A successful exploit could allow the attacker to disable the targeted system's scanning services and ultimately prevent the system from being protected from further intrusion. There are no workarounds that address this vulnerability."}], "exploits": [{"lang": "en", "value": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory."}], "metrics": [{"cvssV3_0": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.0"}}], "problemTypes": [{"descriptions": [{"cweId": "CWE-427", "description": "CWE-427", "lang": "en", "type": "CWE"}]}], "providerMetadata": {"dateUpdated": "2018-11-14T10:57:02", "orgId": "d1c1063e-7a18-46af-9102-31f8928bc633", "shortName": "cisco"}, "references": [{"name": "105759", "tags": ["vdb-entry", "x_refsource_BID"], "url": "http://www.securityfocus.com/bid/105759"}, {"name": "20181029 Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability", "tags": ["vendor-advisory", "x_refsource_CISCO"], "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181029-amp-dll"}], "source": {"advisory": "cisco-sa-20181029-amp-dll", "defect": [["CSCvm93525"]], "discovery": "INTERNAL"}, "title": "Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability", "x_legacyV4Record": {"CVE_data_meta": {"ASSIGNER": "psirt@cisco.com", "DATE_PUBLIC": "2018-10-29T16:00:00-0500", "ID": "CVE-2018-15452", "STATE": "PUBLIC", "TITLE": "Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability"}, "affects": {"vendor": {"vendor_data": [{"product": {"product_data": [{"product_name": "Cisco AMP for Endpoints", "version": {"version_data": [{"version_value": "n/a"}]}}]}, "vendor_name": "Cisco"}]}}, "data_format": "MITRE", "data_type": "CVE", "data_version": "4.0", "description": {"description_data": [{"lang": "eng", "value": "A vulnerability in the DLL loading component of Cisco Advanced Malware Protection (AMP) for Endpoints on Windows could allow an authenticated, local attacker to disable system scanning services or take other actions to prevent detection of unauthorized intrusions. To exploit this vulnerability, the attacker would need to have administrative credentials on the Windows system. The vulnerability is due to the improper validation of resources loaded by a system process at run time. An attacker could exploit this vulnerability by crafting a malicious DLL file and placing it in a specific location on the targeted system. A successful exploit could allow the attacker to disable the targeted system's scanning services and ultimately prevent the system from being protected from further intrusion. There are no workarounds that address this vulnerability."}]}, "exploit": [{"lang": "en", "value": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory."}], "impact": {"cvss": {"baseScore": "6.7", "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.0"}}, "problemtype": {"problemtype_data": [{"description": [{"lang": "eng", "value": "CWE-427"}]}]}, "references": {"reference_data": [{"name": "105759", "refsource": "BID", "url": "http://www.securityfocus.com/bid/105759"}, {"name": "20181029 Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability", "refsource": "CISCO", "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181029-amp-dll"}]}, "source": {"advisory": "cisco-sa-20181029-amp-dll", "defect": [["CSCvm93525"]], "discovery": "INTERNAL"}}}, "adp": [{"providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-05T09:54:03.601Z"}, "title": "CVE Program Container", "references": [{"name": "105759", "tags": ["vdb-entry", "x_refsource_BID", "x_transferred"], "url": "http://www.securityfocus.com/bid/105759"}, {"name": "20181029 Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability", "tags": ["vendor-advisory", "x_refsource_CISCO", "x_transferred"], "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181029-amp-dll"}]}, {"metrics": [{"other": {"type": "ssvc", "content": {"timestamp": "2024-11-25T18:47:03.927013Z", "id": "CVE-2018-15452", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "role": "CISA Coordinator", "version": "2.0.3"}}}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-11-26T14:20:54.058Z"}}]}, "cveMetadata": {"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633", "assignerShortName": "cisco", "cveId": "CVE-2018-15452", "datePublished": "2018-11-13T14:00:00Z", "dateReserved": "2018-08-17T00:00:00", "dateUpdated": "2024-11-26T14:20:54.058Z", "state": "PUBLISHED"}, "dataType": "CVE_RECORD", "dataVersion": "5.1"}

{"containers": {"cna": {"affected": [{"product": "Cisco AMP for Endpoints", "vendor": "Cisco", "versions": [{"status": "affected", "version": "n/a"}]}], "datePublic": "2018-10-29T00:00:00", "descriptions": [{"lang": "en", "value": "A vulnerability in the DLL loading component of Cisco Advanced Malware Protection (AMP) for Endpoints on Windows could allow an authenticated, local attacker to disable system scanning services or take other actions to prevent detection of unauthorized intrusions. To exploit this vulnerability, the attacker would need to have administrative credentials on the Windows system. The vulnerability is due to the improper validation of resources loaded by a system process at run time. An attacker could exploit this vulnerability by crafting a malicious DLL file and placing it in a specific location on the targeted system. A successful exploit could allow the attacker to disable the targeted system's scanning services and ultimately prevent the system from being protected from further intrusion. There are no workarounds that address this vulnerability."}], "exploits": [{"lang": "en", "value": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory."}], "metrics": [{"cvssV3_0": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.0"}}], "problemTypes": [{"descriptions": [{"cweId": "CWE-427", "description": "CWE-427", "lang": "en", "type": "CWE"}]}], "providerMetadata": {"dateUpdated": "2018-11-14T10:57:02", "orgId": "d1c1063e-7a18-46af-9102-31f8928bc633", "shortName": "cisco"}, "references": [{"name": "105759", "tags": ["vdb-entry", "x_refsource_BID"], "url": "http://www.securityfocus.com/bid/105759"}, {"name": "20181029 Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability", "tags": ["vendor-advisory", "x_refsource_CISCO"], "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181029-amp-dll"}], "source": {"advisory": "cisco-sa-20181029-amp-dll", "defect": [["CSCvm93525"]], "discovery": "INTERNAL"}, "title": "Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability", "x_legacyV4Record": {"CVE_data_meta": {"ASSIGNER": "psirt@cisco.com", "DATE_PUBLIC": "2018-10-29T16:00:00-0500", "ID": "CVE-2018-15452", "STATE": "PUBLIC", "TITLE": "Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability"}, "affects": {"vendor": {"vendor_data": [{"product": {"product_data": [{"product_name": "Cisco AMP for Endpoints", "version": {"version_data": [{"version_value": "n/a"}]}}]}, "vendor_name": "Cisco"}]}}, "data_format": "MITRE", "data_type": "CVE", "data_version": "4.0", "description": {"description_data": [{"lang": "eng", "value": "A vulnerability in the DLL loading component of Cisco Advanced Malware Protection (AMP) for Endpoints on Windows could allow an authenticated, local attacker to disable system scanning services or take other actions to prevent detection of unauthorized intrusions. To exploit this vulnerability, the attacker would need to have administrative credentials on the Windows system. The vulnerability is due to the improper validation of resources loaded by a system process at run time. An attacker could exploit this vulnerability by crafting a malicious DLL file and placing it in a specific location on the targeted system. A successful exploit could allow the attacker to disable the targeted system's scanning services and ultimately prevent the system from being protected from further intrusion. There are no workarounds that address this vulnerability."}]}, "exploit": [{"lang": "en", "value": "The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory."}], "impact": {"cvss": {"baseScore": "6.7", "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.0"}}, "problemtype": {"problemtype_data": [{"description": [{"lang": "eng", "value": "CWE-427"}]}]}, "references": {"reference_data": [{"name": "105759", "refsource": "BID", "url": "http://www.securityfocus.com/bid/105759"}, {"name": "20181029 Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability", "refsource": "CISCO", "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181029-amp-dll"}]}, "source": {"advisory": "cisco-sa-20181029-amp-dll", "defect": [["CSCvm93525"]], "discovery": "INTERNAL"}}}, "adp": [{"providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-05T09:54:03.601Z"}, "title": "CVE Program Container", "references": [{"name": "105759", "tags": ["vdb-entry", "x_refsource_BID", "x_transferred"], "url": "http://www.securityfocus.com/bid/105759"}, {"name": "20181029 Cisco Advanced Malware Protection for Endpoints on Windows DLL Preloading Vulnerability", "tags": ["vendor-advisory", "x_refsource_CISCO", "x_transferred"], "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181029-amp-dll"}]}, {"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2018-15452", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-11-25T18:47:03.927013Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-11-25T18:49:41.092Z"}}]}, "cveMetadata": {"assignerOrgId": "d1c1063e-7a18-46af-9102-31f8928bc633", "assignerShortName": "cisco", "cveId": "CVE-2018-15452", "datePublished": "2018-11-13T14:00:00Z", "dateReserved": "2018-08-17T00:00:00", "dateUpdated": "2024-11-26T14:20:54.058Z", "state": "PUBLISHED"}, "dataType": "CVE_RECORD", "dataVersion": "5.1"}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:a:cisco:advanced_malware_protection_for_endpoints:-:*:*:*:*:*:*:*", "matchCriteriaId": "7EE173FA-23EB-4046-8FE3-1C136713F44C", "vulnerable": true}], "negate": false, "operator": "OR"}, {"cpeMatch": [{"criteria": "cpe:2.3:o:microsoft:windows:-:*:*:*:*:*:*:*", "matchCriteriaId": "A2572D17-1DE6-457B-99CC-64AFD54487EA", "vulnerable": false}], "negate": false, "operator": "OR"}], "operator": "AND"}], "descriptions": [{"lang": "en", "value": "A vulnerability in the DLL loading component of Cisco Advanced Malware Protection (AMP) for Endpoints on Windows could allow an authenticated, local attacker to disable system scanning services or take other actions to prevent detection of unauthorized intrusions. To exploit this vulnerability, the attacker would need to have administrative credentials on the Windows system. The vulnerability is due to the improper validation of resources loaded by a system process at run time. An attacker could exploit this vulnerability by crafting a malicious DLL file and placing it in a specific location on the targeted system. A successful exploit could allow the attacker to disable the targeted system's scanning services and ultimately prevent the system from being protected from further intrusion. There are no workarounds that address this vulnerability."}, {"lang": "es", "value": "Una vulnerabilidad en el componente de carga de DLL de Cisco Advanced Malware Protection (AMP) for Endpoints en Windows podr\u00eda permitir que un atacante local autenticado deshabilite los servicios de escaneo del sistema o lleve a cabo otras acciones para evitar la detecci\u00f3n de intrusiones no autorizadas. Para explotar esta vulnerabilidad, el atacante necesitar\u00eda contar con credenciales administrativas en el sistema Windows. La vulnerabilidad se debe a la validaci\u00f3n incorrecta de recursos cargados por un proceso del sistema en tiempo de ejecuci\u00f3n. Un atacante podr\u00eda explotar esta vulnerabilidad manipulando un archivo DLL malicioso y coloc\u00e1ndolo en una ubicaci\u00f3n espec\u00edfica del sistema objetivo. Su explotaci\u00f3n con \u00e9xito podr\u00eda permitir que el atacante deshabilite los servicios de escaneo del sistema objetivo y, en \u00faltima instancia, evite que el sistema siga protegido ante m\u00e1s intrusiones. No existen alternativas que aborden esta vulnerabilidad."}], "id": "CVE-2018-15452", "lastModified": "2024-11-21T03:50:50.077", "metrics": {"cvssMetricV2": [{"acInsufInfo": false, "baseSeverity": "MEDIUM", "cvssData": {"accessComplexity": "LOW", "accessVector": "LOCAL", "authentication": "NONE", "availabilityImpact": "PARTIAL", "baseScore": 4.6, "confidentialityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "vectorString": "AV:L/AC:L/Au:N/C:P/I:P/A:P", "version": "2.0"}, "exploitabilityScore": 3.9, "impactScore": 6.4, "obtainAllPrivilege": false, "obtainOtherPrivilege": false, "obtainUserPrivilege": false, "source": "nvd@nist.gov", "type": "Primary", "userInteractionRequired": false}], "cvssMetricV30": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.0"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "ykramarz@cisco.com", "type": "Secondary"}, {"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 6.7, "baseSeverity": "MEDIUM", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "HIGH", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.0/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H", "version": "3.0"}, "exploitabilityScore": 0.8, "impactScore": 5.9, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2018-11-13T14:29:00.230", "references": [{"source": "ykramarz@cisco.com", "tags": ["Third Party Advisory", "VDB Entry"], "url": "http://www.securityfocus.com/bid/105759"}, {"source": "ykramarz@cisco.com", "tags": ["Vendor Advisory"], "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181029-amp-dll"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Third Party Advisory", "VDB Entry"], "url": "http://www.securityfocus.com/bid/105759"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Vendor Advisory"], "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181029-amp-dll"}], "sourceIdentifier": "ykramarz@cisco.com", "vulnStatus": "Modified", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-427"}], "source": "ykramarz@cisco.com", "type": "Secondary"}, {"description": [{"lang": "en", "value": "CWE-427"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{}