Filtered by vendor Linux Subscriptions
Total 26226 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2025-40122 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error When running perf_fuzzer on PTL, sometimes the below "unchecked MSR access error" is seen when accessing IA32_PMC_x_CFG_B MSRs. [ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30) [ 55.611280] Call Trace: [ 55.611282] <TASK> [ 55.611284] ? intel_pmu_config_acr+0x87/0x160 [ 55.611289] intel_pmu_enable_acr+0x6d/0x80 [ 55.611291] intel_pmu_enable_event+0xce/0x460 [ 55.611293] x86_pmu_start+0x78/0xb0 [ 55.611297] x86_pmu_enable+0x218/0x3a0 [ 55.611300] ? x86_pmu_enable+0x121/0x3a0 [ 55.611302] perf_pmu_enable+0x40/0x50 [ 55.611307] ctx_resched+0x19d/0x220 [ 55.611309] __perf_install_in_context+0x284/0x2f0 [ 55.611311] ? __pfx_remote_function+0x10/0x10 [ 55.611314] remote_function+0x52/0x70 [ 55.611317] ? __pfx_remote_function+0x10/0x10 [ 55.611319] generic_exec_single+0x84/0x150 [ 55.611323] smp_call_function_single+0xc5/0x1a0 [ 55.611326] ? __pfx_remote_function+0x10/0x10 [ 55.611329] perf_install_in_context+0xd1/0x1e0 [ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10 [ 55.611333] __do_sys_perf_event_open+0xa76/0x1040 [ 55.611336] __x64_sys_perf_event_open+0x26/0x30 [ 55.611337] x64_sys_call+0x1d8e/0x20c0 [ 55.611339] do_syscall_64+0x4f/0x120 [ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e On PTL, GP counter 0 and 1 doesn't support auto counter reload feature, thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR which requires to enable auto counter reload on GP counter 0. The root cause of causing this issue is the check for auto counter reload (ACR) counter mask from user space is incorrect in intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter mask from user space could be set into hw.config1 and then written into CFG_B MSRs and trigger the MSR access warning. e.g., User may create a perf event with ACR counter mask (config2=0xcb), and there is only 1 event created, so "cpuc->n_events" is 1. The correct check condition should be "i + idx >= cpuc->n_events" instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise, the counter mask would traverse twice and an invalid "cpuc->assign[1]" bit (bit 0) is set into hw.config1 and cause MSR accessing error. Besides, also check if the ACR counter mask corresponding events are ACR events. If not, filter out these counter mask. If a event is not a ACR event, it could be scheduled to an HW counter which doesn't support ACR. It's invalid to add their counter index in ACR counter mask. Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as user could set any invalid ACR counter mask and the warning message could mislead users.
CVE-2025-40121 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: bytcr_rt5651: Fix invalid quirk input mapping When an invalid value is passed via quirk option, currently bytcr_rt5640 driver just ignores and leaves as is, which may lead to unepxected results like OOB access. This patch adds the sanity check and corrects the input mapping to the certain default value if an invalid value is passed.
CVE-2025-40110 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a null-ptr access in the cursor snooper Check that the resource which is converted to a surface exists before trying to use the cursor snooper on it. vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers because some svga commands accept SVGA3D_INVALID_ID to mean "no surface", unfortunately functions that accept the actual surfaces as objects might (and in case of the cursor snooper, do not) be able to handle null objects. Make sure that we validate not only the identifier (via the vmw_cmd_res_check) but also check that the actual resource exists before trying to do something with it. Fixes unchecked null-ptr reference in the snooping code.
CVE-2025-40109 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: crypto: rng - Ensure set_ent is always present Ensure that set_ent is always set since only drbg provides it.
CVE-2023-53782 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: dccp: Fix out of bounds access in DCCP error handler There was a previous attempt to fix an out-of-bounds access in the DCCP error handlers, but that fix assumed that the error handlers only want to access the first 8 bytes of the DCCP header. Actually, they also look at the DCCP sequence number, which is stored beyond 8 bytes, so an explicit pskb_may_pull() is required.
CVE-2023-54058 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Check if ffa_driver remove is present before executing Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194
CVE-2023-54017 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: fix possible memory leak in ibmebus_bus_init() If device_register() returns error in ibmebus_bus_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup().
CVE-2023-54015 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Devcom, fix error flow in mlx5_devcom_register_device In case devcom allocation is failed, mlx5 is always freeing the priv. However, this priv might have been allocated by a different thread, and freeing it might lead to use-after-free bugs. Fix it by freeing the priv only in case it was allocated by the running thread.
CVE-2023-53834 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: iio: adc: ina2xx: avoid NULL pointer dereference on OF device match The affected lines were resulting in a NULL pointer dereference on our platform because the device tree contained the following list of compatible strings: power-sensor@40 { compatible = "ti,ina232", "ti,ina231"; ... }; Since the driver doesn't declare a compatible string "ti,ina232", the OF matching succeeds on "ti,ina231". But the I2C device ID info is populated via the first compatible string, cf. modalias population in of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy I2C device ID table either, the struct i2c_device_id *id pointer in the probe function is NULL. Fix this by using the already populated type variable instead, which points to the proper driver data. Since the name is also wanted, add a generic one to the ina2xx_config table.
CVE-2023-54080 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: skip splitting and logical rewriting on pre-alloc write When doing a relocation, there is a chance that at the time of btrfs_reloc_clone_csums(), there is no checksum for the corresponding region. In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item and so ordered_extent's logical is set to some invalid value. Then, btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a block group and will hit an assert or a null pointer dereference as following. This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16 times) with a null_blk setup. The device's zone size and capacity is set to 32 MB and the storage size is set to 5 GB on my setup. KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00 > 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00 RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827 R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000 R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0 Call Trace: <TASK> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] ? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs] btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs] ? rcu_is_watching+0x11/0xb0 ? lock_release+0x47a/0x620 ? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs] ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs] ? __smp_call_single_queue+0x124/0x350 ? rcu_is_watching+0x11/0xb0 btrfs_work_helper+0x19f/0xc60 [btrfs] ? __pfx_try_to_wake_up+0x10/0x10 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 process_one_work+0x8c1/0x1430 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? _raw_spin_lock_irq+0x52/0x60 worker_thread+0x100/0x12c0 ? __kthread_parkme+0xc1/0x1f0 ? __pfx_worker_thread+0x10/0x10 kthread+0x2ea/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> On the zoned mode, writing to pre-allocated region means data relocation write. Such write always uses WRITE command so there is no need of splitting and rewriting logical address. Thus, we can just skip the function for the case.
CVE-2023-53987 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: ping: Fix potentail NULL deref for /proc/net/icmp. After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets.
CVE-2023-54113 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: rcu: dump vmalloc memory info safely Currently, for double invoke call_rcu(), will dump rcu_head objects memory info, if the objects is not allocated from the slab allocator, the vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to be held, since the call_rcu() can be invoked in interrupt context, therefore, there is a possibility of spinlock deadlock scenarios. And in Preempt-RT kernel, the rcutorture test also trigger the following lockdep warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 1 3 locks held by swapper/0/1: #0: ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0 #1: ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370 #2: ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70 irq event stamp: 565512 hardirqs last enabled at (565511): [<ffffffffb379b138>] __call_rcu_common+0x218/0x940 hardirqs last disabled at (565512): [<ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370 softirqs last enabled at (399112): [<ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170 softirqs last disabled at (399106): [<ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0 Preemption disabled at: [<ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.5.0-rc4-rt2-yocto-preempt-rt+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xb0 dump_stack+0x14/0x20 __might_resched+0x1aa/0x280 ? __pfx_rcu_torture_err_cb+0x10/0x10 rt_spin_lock+0x53/0x130 ? find_vmap_area+0x1f/0x70 find_vmap_area+0x1f/0x70 vmalloc_dump_obj+0x20/0x60 mem_dump_obj+0x22/0x90 __call_rcu_common+0x5bf/0x940 ? debug_smp_processor_id+0x1b/0x30 call_rcu_hurry+0x14/0x20 rcu_torture_init+0x1f82/0x2370 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_init+0x10/0x10 do_one_initcall+0x6c/0x300 ? debug_smp_processor_id+0x1b/0x30 kernel_init_freeable+0x2b9/0x540 ? __pfx_kernel_init+0x10/0x10 kernel_init+0x1f/0x150 ret_from_fork+0x40/0x50 ? __pfx_kernel_init+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The previous patch fixes this by using the deadlock-safe best-effort version of find_vm_area. However, in case of failure print the fact that the pointer was a vmalloc pointer so that we print at least something.
CVE-2023-54115 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: pcmcia: rsrc_nonstatic: Fix memory leak in nonstatic_release_resource_db() When nonstatic_release_resource_db() frees all resources associated with an PCMCIA socket, it forgets to free socket_data too, causing a memory leak observable with kmemleak: unreferenced object 0xc28d1000 (size 64): comm "systemd-udevd", pid 297, jiffies 4294898478 (age 194.484s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f0 85 0e c3 00 00 00 00 ................ 00 00 00 00 0c 10 8d c2 00 00 00 00 00 00 00 00 ................ backtrace: [<ffda4245>] __kmem_cache_alloc_node+0x2d7/0x4a0 [<7e51f0c8>] kmalloc_trace+0x31/0xa4 [<d52b4ca0>] nonstatic_init+0x24/0x1a4 [pcmcia_rsrc] [<a2f13e08>] pcmcia_register_socket+0x200/0x35c [pcmcia_core] [<a728be1b>] yenta_probe+0x4d8/0xa70 [yenta_socket] [<c48fac39>] pci_device_probe+0x99/0x194 [<84b7c690>] really_probe+0x181/0x45c [<8060fe6e>] __driver_probe_device+0x75/0x1f4 [<b9b76f43>] driver_probe_device+0x28/0xac [<648b766f>] __driver_attach+0xeb/0x1e4 [<6e9659eb>] bus_for_each_dev+0x61/0xb4 [<25a669f3>] driver_attach+0x1e/0x28 [<d8671d6b>] bus_add_driver+0x102/0x20c [<df0d323c>] driver_register+0x5b/0x120 [<942cd8a4>] __pci_register_driver+0x44/0x4c [<e536027e>] __UNIQUE_ID___addressable_cleanup_module188+0x1c/0xfffff000 [iTCO_vendor_support] Fix this by freeing socket_data too. Tested on a Acer Travelmate 4002WLMi by manually binding/unbinding the yenta_cardbus driver (yenta_socket).
CVE-2022-50654 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix panic due to wrong pageattr of im->image In the scenario where livepatch and kretfunc coexist, the pageattr of im->image is rox after arch_prepare_bpf_trampoline in bpf_trampoline_update, and then modify_fentry or register_fentry returns -EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag will be configured, and arch_prepare_bpf_trampoline will be re-executed. At this time, because the pageattr of im->image is rox, arch_prepare_bpf_trampoline will read and write im->image, which causes a fault. as follows: insmod livepatch-sample.ko # samples/livepatch/livepatch-sample.c bpftrace -e 'kretfunc:cmdline_proc_show {}' BUG: unable to handle page fault for address: ffffffffa0206000 PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 2 PID: 270 Comm: bpftrace Tainted: G E K 6.1.0 #5 RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0 RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202 RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030 RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400 R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8 R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10 FS: 00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bpf_trampoline_update+0x25a/0x6b0 __bpf_trampoline_link_prog+0x101/0x240 bpf_trampoline_link_prog+0x2d/0x50 bpf_tracing_prog_attach+0x24c/0x530 bpf_raw_tp_link_attach+0x73/0x1d0 __sys_bpf+0x100e/0x2570 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x5b/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd With this patch, when modify_fentry or register_fentry returns -EAGAIN from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset to nx+rw.
CVE-2022-50698 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ASoC: da7219: Fix an error handling path in da7219_register_dai_clks() If clk_hw_register() fails, the corresponding clk should not be unregistered. To handle errors from loops, clean up partial iterations before doing the goto. So add a clk_hw_unregister(). Then use a while (--i >= 0) loop in the unwind section.
CVE-2022-50667 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl() If the copy of the description string from userspace fails, then the page for the instance descriptor doesn't get freed before returning -EFAULT, which leads to a memleak.
CVE-2023-54131 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: Fix memory leak when handling surveys When removing a rt2x00 device, its associated channel surveys are not freed, causing a memory leak observable with kmemleak: unreferenced object 0xffff9620f0881a00 (size 512): comm "systemd-udevd", pid 2290, jiffies 4294906974 (age 33.768s) hex dump (first 32 bytes): 70 44 12 00 00 00 00 00 92 8a 00 00 00 00 00 00 pD.............. 00 00 00 00 00 00 00 00 ab 87 01 00 00 00 00 00 ................ backtrace: [<ffffffffb0ed858b>] __kmalloc+0x4b/0x130 [<ffffffffc1b0f29b>] rt2800_probe_hw+0xc2b/0x1380 [rt2800lib] [<ffffffffc1a9496e>] rt2800usb_probe_hw+0xe/0x60 [rt2800usb] [<ffffffffc1ae491a>] rt2x00lib_probe_dev+0x21a/0x7d0 [rt2x00lib] [<ffffffffc1b3b83e>] rt2x00usb_probe+0x1be/0x980 [rt2x00usb] [<ffffffffc05981e2>] usb_probe_interface+0xe2/0x310 [usbcore] [<ffffffffb13be2d5>] really_probe+0x1a5/0x410 [<ffffffffb13be5c8>] __driver_probe_device+0x78/0x180 [<ffffffffb13be6fe>] driver_probe_device+0x1e/0x90 [<ffffffffb13be972>] __driver_attach+0xd2/0x1c0 [<ffffffffb13bbc57>] bus_for_each_dev+0x77/0xd0 [<ffffffffb13bd2a2>] bus_add_driver+0x112/0x210 [<ffffffffb13bfc6c>] driver_register+0x5c/0x120 [<ffffffffc0596ae8>] usb_register_driver+0x88/0x150 [usbcore] [<ffffffffb0c011c4>] do_one_initcall+0x44/0x220 [<ffffffffb0d6134c>] do_init_module+0x4c/0x220 Fix this by freeing the channel surveys on device removal. Tested with a RT3070 based USB wireless adapter.
CVE-2023-54114 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment() As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff.
CVE-2023-54112 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: kcm: Fix memory leak in error path of kcm_sendmsg() syzbot reported a memory leak like below: BUG: memory leak unreferenced object 0xffff88810b088c00 (size 240): comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s) hex dump (first 32 bytes): 00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634 [<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline] [<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815 [<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline] [<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748 [<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494 [<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548 [<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577 [<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append newly allocated skbs to 'head'. If some bytes are copied, an error occurred, and jumped to out_error label, 'last_skb' is left unmodified. A later kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the 'head' frag_list and causing the leak. This patch fixes this issue by properly updating the last allocated skb in 'last_skb'.
CVE-2023-54108 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests The following message and call trace was seen with debug kernels: DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as single] WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017 check_unmap+0xf42/0x1990 Call Trace: debug_dma_unmap_page+0xc9/0x100 qla_nvme_ls_unmap+0x141/0x210 [qla2xxx] Remove DMA mapping from the driver altogether, as it is already done by FC layer. This prevents the warning.