ReportizFlow
Filtered by vendor
Subscriptions
Total
7495 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39873 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB can_put_echo_skb() takes ownership of the SKB and it may be freed during or after the call. However, xilinx_can xcan_write_frame() keeps using SKB after the call. Fix that by only calling can_put_echo_skb() after the code is done touching the SKB. The tx_lock is held for the entire xcan_write_frame() execution and also on the can_get_echo_skb() side so the order of operations does not matter. An earlier fix commit 3d3c817c3a40 ("can: xilinx_can: Fix usage of skb memory") did not move the can_put_echo_skb() call far enough. [mkl: add "commit" in front of sha1 in patch description] [mkl: fix indention] | ||||
| CVE-2025-39877 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix use-after-free in state_show() state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock. This allows a use-after-free race: CPU 0 CPU 1 ----- ----- state_show() damon_sysfs_turn_damon_on() ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock); damon_destroy_ctx(kdamond->damon_ctx); kdamond->damon_ctx = NULL; mutex_unlock(&damon_sysfs_lock); damon_is_running(ctx); /* ctx is freed */ mutex_lock(&ctx->kdamond_lock); /* UAF */ (The race can also occur with damon_sysfs_kdamonds_rm_dirs() and damon_sysfs_kdamond_release(), which free or replace the context under damon_sysfs_lock.) Fix by taking damon_sysfs_lock before dereferencing the context, mirroring the locking used in pid_show(). The bug has existed since state_show() first accessed kdamond->damon_ctx. | ||||
| CVE-2023-53479 | 1 Linux | 1 Linux Kernel | 2026-01-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/acpi: Fix a use-after-free in cxl_parse_cfmws() KASAN and KFENCE detected an user-after-free in the CXL driver. This happens in the cxl_decoder_add() fail path. KASAN prints the following error: BUG: KASAN: slab-use-after-free in cxl_parse_cfmws (drivers/cxl/acpi.c:299) This happens in cxl_parse_cfmws(), where put_device() is called, releasing cxld, which is accessed later. Use the local variables in the dev_err() instead of pointing to the released memory. Since the dev_err() is printing a resource, change the open coded print format to use the %pr format specifier. | ||||
| CVE-2023-53484 | 1 Linux | 1 Linux Kernel | 2026-01-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: lib: cpu_rmap: Avoid use after free on rmap->obj array entries When calling irq_set_affinity_notifier() with NULL at the notify argument, it will cause freeing of the glue pointer in the corresponding array entry but will leave the pointer in the array. A subsequent call to free_irq_cpu_rmap() will try to free this entry again leading to possible use after free. Fix that by setting NULL to the array entry and checking that we have non-zero at the array entry when iterating over the array in free_irq_cpu_rmap(). The current code does not suffer from this since there are no cases where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the notify arg) is called, followed by a call to free_irq_cpu_rmap() so we don't hit and issue. Subsequent patches in this series excersize this flow, hence the required fix. | ||||
| CVE-2022-50432 | 1 Linux | 1 Linux Kernel | 2026-01-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: kernfs: fix use-after-free in __kernfs_remove Syzkaller managed to trigger concurrent calls to kernfs_remove_by_name_ns() for the same file resulting in a KASAN detected use-after-free. The race occurs when the root node is freed during kernfs_drain(). To prevent this acquire an additional reference for the root of the tree that is removed before calling __kernfs_remove(). Found by syzkaller with the following reproducer (slab_nomerge is required): syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0) r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0) close(r0) pipe2(&(0x7f0000000140)={0xffffffffffffffff, <r1=>0xffffffffffffffff}, 0x800) mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}}) Sample report: ================================================================== BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline] BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857 CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433 kasan_report+0xa3/0x130 mm/kasan/report.c:495 kernfs_type include/linux/kernfs.h:335 [inline] kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 __kernfs_remove fs/kernfs/dir.c:1356 [inline] kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335 p9_client_create+0xd4d/0x1190 net/9p/client.c:993 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610 vfs_get_tree+0x85/0x2e0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x675/0x1d00 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x282/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f725f983aed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed RDX: 00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000 RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000 R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000 </TASK> Allocated by task 855: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:7 ---truncated--- | ||||
| CVE-2022-50433 | 1 Linux | 1 Linux Kernel | 2026-01-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: efi: ssdt: Don't free memory if ACPI table was loaded successfully Amadeusz reports KASAN use-after-free errors introduced by commit 3881ee0b1edc ("efi: avoid efivars layer when loading SSDTs from variables"). The problem appears to be that the memory that holds the new ACPI table is now freed unconditionally, instead of only when the ACPI core reported a failure to load the table. So let's fix this, by omitting the kfree() on success. | ||||
| CVE-2025-38129 | 1 Linux | 1 Linux Kernel | 2026-01-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix use-after-free in page_pool_recycle_in_ring syzbot reported a uaf in page_pool_recycle_in_ring: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 Read of size 8 at addr ffff8880286045a0 by task syz.0.284/6943 CPU: 0 UID: 0 PID: 6943 Comm: syz.0.284 Not tainted 6.13.0-rc3-syzkaller-gdfa94ce54f41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:165 [inline] _raw_spin_unlock_bh+0x1b/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_produce_bh include/linux/ptr_ring.h:164 [inline] page_pool_recycle_in_ring net/core/page_pool.c:707 [inline] page_pool_put_unrefed_netmem+0x748/0xb00 net/core/page_pool.c:826 page_pool_put_netmem include/net/page_pool/helpers.h:323 [inline] page_pool_put_full_netmem include/net/page_pool/helpers.h:353 [inline] napi_pp_put_page+0x149/0x2b0 net/core/skbuff.c:1036 skb_pp_recycle net/core/skbuff.c:1047 [inline] skb_free_head net/core/skbuff.c:1094 [inline] skb_release_data+0x6c4/0x8a0 net/core/skbuff.c:1125 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb net/core/skbuff.c:1204 [inline] sk_skb_reason_drop+0x1c9/0x380 net/core/skbuff.c:1242 kfree_skb_reason include/linux/skbuff.h:1263 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3343 [inline] root cause is: page_pool_recycle_in_ring ptr_ring_produce spin_lock(&r->producer_lock); WRITE_ONCE(r->queue[r->producer++], ptr) //recycle last page to pool page_pool_release page_pool_scrub page_pool_empty_ring ptr_ring_consume page_pool_return_page //release all page __page_pool_destroy free_percpu(pool->recycle_stats); free(pool) //free spin_unlock(&r->producer_lock); //pool->ring uaf read recycle_stat_inc(pool, ring); page_pool can be free while page pool recycle the last page in ring. Add producer-lock barrier to page_pool_release to prevent the page pool from being free before all pages have been recycled. recycle_stat_inc() is empty when CONFIG_PAGE_POOL_STATS is not enabled, which will trigger Wempty-body build warning. Add definition for pool stat macro to fix warning. | ||||
| CVE-2025-38022 | 1 Linux | 1 Linux Kernel | 2026-01-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix "KASAN: slab-use-after-free Read in ib_register_device" problem Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 strlen+0x93/0xa0 lib/string.c:420 __fortify_strlen include/linux/fortify-string.h:268 [inline] get_kobj_path_length lib/kobject.c:118 [inline] kobject_get_path+0x3f/0x2a0 lib/kobject.c:158 kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545 ib_register_device drivers/infiniband/core/device.c:1472 [inline] ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393 rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552 rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225 nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796 rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmsg+0x16d/0x220 net/socket.c:2652 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This problem is similar to the problem that the commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name") fixes. The root cause is: the function ib_device_rename() renames the name with lock. But in the function kobject_uevent(), this name is accessed without lock protection at the same time. The solution is to add the lock protection when this name is accessed in the function kobject_uevent(). | ||||
| CVE-2023-53454 | 1 Linux | 1 Linux Kernel | 2026-01-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Correct devm device reference for hidinput input_dev name Reference the HID device rather than the input device for the devm allocation of the input_dev name. Referencing the input_dev would lead to a use-after-free when the input_dev was unregistered and subsequently fires a uevent that depends on the name. At the point of firing the uevent, the name would be freed by devres management. Use devm_kasprintf to simplify the logic for allocating memory and formatting the input_dev name string. | ||||
| CVE-2023-53494 | 1 Linux | 1 Linux Kernel | 2026-01-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: xts - Handle EBUSY correctly As it is xts only handles the special return value of EINPROGRESS, which means that in all other cases it will free data related to the request. However, as the caller of xts may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free. | ||||
| CVE-2025-39881 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: kernfs: Fix UAF in polling when open file is released A use-after-free (UAF) vulnerability was identified in the PSI (Pressure Stall Information) monitoring mechanism: BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140 Read of size 8 at addr ffff3de3d50bd308 by task systemd/1 psi_trigger_poll+0x3c/0x140 cgroup_pressure_poll+0x70/0xa0 cgroup_file_poll+0x8c/0x100 kernfs_fop_poll+0x11c/0x1c0 ep_item_poll.isra.0+0x188/0x2c0 Allocated by task 1: cgroup_file_open+0x88/0x388 kernfs_fop_open+0x73c/0xaf0 do_dentry_open+0x5fc/0x1200 vfs_open+0xa0/0x3f0 do_open+0x7e8/0xd08 path_openat+0x2fc/0x6b0 do_filp_open+0x174/0x368 Freed by task 8462: cgroup_file_release+0x130/0x1f8 kernfs_drain_open_files+0x17c/0x440 kernfs_drain+0x2dc/0x360 kernfs_show+0x1b8/0x288 cgroup_file_show+0x150/0x268 cgroup_pressure_write+0x1dc/0x340 cgroup_file_write+0x274/0x548 Reproduction Steps: 1. Open test/cpu.pressure and establish epoll monitoring 2. Disable monitoring: echo 0 > test/cgroup.pressure 3. Re-enable monitoring: echo 1 > test/cgroup.pressure The race condition occurs because: 1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it: - Releases PSI triggers via cgroup_file_release() - Frees of->priv through kernfs_drain_open_files() 2. While epoll still holds reference to the file and continues polling 3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv epolling disable/enable cgroup.pressure fd=open(cpu.pressure) while(1) ... epoll_wait kernfs_fop_poll kernfs_get_active = true echo 0 > cgroup.pressure ... cgroup_file_show kernfs_show // inactive kn kernfs_drain_open_files cft->release(of); kfree(ctx); ... kernfs_get_active = false echo 1 > cgroup.pressure kernfs_show kernfs_activate_one(kn); kernfs_fop_poll kernfs_get_active = true cgroup_file_poll psi_trigger_poll // UAF ... end: close(fd) To address this issue, introduce kernfs_get_active_of() for kernfs open files to obtain active references. This function will fail if the open file has been released. Replace kernfs_get_active() with kernfs_get_active_of() to prevent further operations on released file descriptors. | ||||
| CVE-2022-50454 | 1 Linux | 1 Linux Kernel | 2026-01-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table() nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and free the memory.Thus, when nouveau_bo_init() returns an error, the gem object has already been released. Then the call to nouveau_bo_ref() will use the freed "nvbo->bo" and lead to a use-after-free bug. We should delete the call to nouveau_bo_ref() to avoid the use-after-free. | ||||
| CVE-2025-68617 | 1 Fluidsynth | 1 Fluidsynth | 2026-01-15 | 7 High |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From versions 2.5.0 to before 2.5.2, a race condition during unloading of a DLS file can trigger a heap-based use-after-free. A concurrently running thread may be pending to unload a DLS file, leading to use of freed memory, if the synthesizer is being concurrently destroyed, or samples of the (unloaded) DLS file are concurrently used to synthesize audio. This issue has been patched in version 2.5.2. The problem will not occur, when explicitly unloading a DLS file (before synth destruction), provided that at the time of unloading, no samples of the respective file are used by active voices. The problem will not occur in versions of FluidSynth that have been compiled without native DLS support. | ||||
| CVE-2025-39896 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Prevent recovery work from being queued during device removal Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini() to ensure that no new recovery work items can be queued after device removal has started. Previously, recovery work could be scheduled even after canceling existing work, potentially leading to use-after-free bugs if recovery accessed freed resources. Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better reflect its new behavior. | ||||
| CVE-2025-39882 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: fix potential OF node use-after-free The for_each_child_of_node() helper drops the reference it takes to each node as it iterates over children and an explicit of_node_put() is only needed when exiting the loop early. Drop the recently introduced bogus additional reference count decrement at each iteration that could potentially lead to a use-after-free. | ||||
| CVE-2025-39861 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: vhci: Prevent use-after-free by removing debugfs files early Move the creation of debugfs files into a dedicated function, and ensure they are explicitly removed during vhci_release(), before associated data structures are freed. Previously, debugfs files such as "force_suspend", "force_wakeup", and others were created under hdev->debugfs but not removed in vhci_release(). Since vhci_release() frees the backing vhci_data structure, any access to these files after release would result in use-after-free errors. Although hdev->debugfs is later freed in hci_release_dev(), user can access files after vhci_data is freed but before hdev->debugfs is released. | ||||
| CVE-2025-39859 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: fix use-after-free bugs causing by ptp_ocp_watchdog The ptp_ocp_detach() only shuts down the watchdog timer if it is pending. However, if the timer handler is already running, the timer_delete_sync() is not called. This leads to race conditions where the devlink that contains the ptp_ocp is deallocated while the timer handler is still accessing it, resulting in use-after-free bugs. The following details one of the race scenarios. (thread 1) | (thread 2) ptp_ocp_remove() | ptp_ocp_detach() | ptp_ocp_watchdog() if (timer_pending(&bp->watchdog))| bp = timer_container_of() timer_delete_sync() | | devlink_free(devlink) //free | | bp-> //use Resolve this by unconditionally calling timer_delete_sync() to ensure the timer is reliably deactivated, preventing any access after free. | ||||
| CVE-2025-39855 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL access of tx->in_use in ice_ptp_ts_irq The E810 device has support for a "low latency" firmware interface to access and read the Tx timestamps. This interface does not use the standard Tx timestamp logic, due to the latency overhead of proxying sideband command requests over the firmware AdminQ. The logic still makes use of the Tx timestamp tracking structure, ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx timestamps complete. Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker is initialized before its first access. This results in NULL dereference or use-after-free bugs similar to the following: [245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000 [245977.278774] RIP: 0010:_find_first_bit+0x19/0x40 [245977.278796] Call Trace: [245977.278809] ? ice_misc_intr+0x364/0x380 [ice] This can occur if a Tx timestamp interrupt races with the driver reset logic. Fix this by only checking the in_use bitmap (and other fields) if the tracker is marked as initialized. The reset flow will clear the init field under lock before it tears the tracker down, thus preventing any use-after-free or NULL access. | ||||
| CVE-2025-39854 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL access of tx->in_use in ice_ll_ts_intr Recent versions of the E810 firmware have support for an extra interrupt to handle report of the "low latency" Tx timestamps coming from the specialized low latency firmware interface. Instead of polling the registers, software can wait until the low latency interrupt is fired. This logic makes use of the Tx timestamp tracking structure, ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx timestamps complete. Unfortunately, the ice_ll_ts_intr() function does not check if the tracker is initialized before its first access. This results in NULL dereference or use-after-free bugs similar to the issues fixed in the ice_ptp_ts_irq() function. Fix this by only checking the in_use bitmap (and other fields) if the tracker is marked as initialized. The reset flow will clear the init field under lock before it tears the tracker down, thus preventing any use-after-free or NULL access. | ||||
| CVE-2023-53432 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firewire: net: fix use after free in fwnet_finish_incoming_packet() The netif_rx() function frees the skb so we can't dereference it to save the skb->len. | ||||