ReportizFlow
Filtered by vendor
Subscriptions
Total
1392 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-0254 | 2026-04-15 | 5.9 Medium | ||
| HCL Digital Experience components Ring API and dxclient may be vulnerable to man-in-the-middle (MitM) attacks prior to 9.5 CF226. An attacker could intercept and potentially alter communication between two parties. | ||||
| CVE-2025-44018 | 1 Gl-inet | 1 Gl-axt1800 | 2026-04-15 | 8.3 High |
| A firmware downgrade vulnerability exists in the OTA Update functionality of GL-Inet GL-AXT1800 4.7.0. A specially crafted .tar file can lead to a firmware downgrade. An attacker can perform a man-in-the-middle attack to trigger this vulnerability. | ||||
| CVE-2024-4062 | 2026-04-15 | 3.7 Low | ||
| A vulnerability was found in Hualai Xiaofang iSC5 3.2.2_112 and classified as problematic. Affected by this issue is some unknown functionality. The manipulation leads to improper certificate validation. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The identifier of this vulnerability is VDB-261788. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2024-53846 | 1 Erlang | 1 Otp | 2026-04-15 | 5.5 Medium |
| OTP is a set of Erlang libraries, which consists of the Erlang runtime system, a number of ready-to-use components mainly written in Erlang, and a set of design principles for Erlang programs. A regression was introduced into the ssl application of OTP starting at OTP-25.3.2.8, OTP-26.2, and OTP-27.0, resulting in a server or client verifying the peer when incorrect extended key usage is presented (i.e., a server will verify a client if they have server auth ext key usage and vice versa). | ||||
| CVE-2025-9785 | 2026-04-15 | N/A | ||
| PaperCut Print Deploy is an optional component that integrates with PaperCut NG/MF which simplifies printer deployment and management. When the component is deployed to an environment, the customer has an option to configure the system to use a self-signed certificate. If the customer does not fully configure the system to leverage the trust database on the clients, it opens up the communication between clients and the server to man-in-the-middle attacks. It was discovered that certain parts of the documentation related to the configuration of SSL in Print Deploy were lacking, which could potentially contribute to a misconfiguration of the Print Deploy client installation. PaperCut strongly recommends to use valid certificates to secure installations and to follow the updated documentation to ensure the correct SSL configuration. Those who use private CAs and/or self-signed certificates should make sure to copy their Certification Authority certificate, or their self signed certificate if using only one, to the trust store of their operating system and to the Java key store | ||||
| CVE-2025-12047 | 1 Lenovo | 1 Scanner Pro | 2026-04-15 | 5.3 Medium |
| A vulnerability was reported in the Lenovo Scanner pro application during an internal security assessment that, under certain circumstances, could allow an attacker on the same logical network to disclose sensitive user files from the application. | ||||
| CVE-2024-37311 | 2026-04-15 | 8.2 High | ||
| Collabora Online is a collaborative online office suite based on LibreOffice. In affected versions of Collabora Online, https connections from coolwsd to other hosts may incompletely verify the remote host's certificate's against the full chain of trust. This vulnerability is fixed in Collabora Online 24.04.4.3, 23.05.14.1, and 22.05.23.1. | ||||
| CVE-2024-27440 | 2026-04-15 | 4.8 Medium | ||
| The Toyoko Inn official App for iOS versions prior to 1.13.0 and Toyoko Inn official App for Android versions prior 1.3.14 don't properly verify server certificates, which allows a man-in-the-middle attacker to spoof servers and obtain sensitive information via a crafted certificate. | ||||
| CVE-2022-32509 | 1 Nuki | 3 Bridge V1, Bridge V2, Smart Lock | 2026-04-15 | 8.8 High |
| An issue was discovered on certain Nuki Home Solutions devices. Lack of certificate validation on HTTP communications allows attackers to intercept and tamper data. This affects Nuki Smart Lock 3.0 before 3.3.5, Nuki Bridge v1 before 1.22.0 and Nuki Bridge v2 before 2.13.2. | ||||
| CVE-2025-22874 | 2026-04-15 | 7.5 High | ||
| Calling Verify with a VerifyOptions.KeyUsages that contains ExtKeyUsageAny unintentionally disabledpolicy validation. This only affected certificate chains which contain policy graphs, which are rather uncommon. | ||||
| CVE-2024-41996 | 1 Diffie-hellman Key Exchange Project | 1 Diffie-hellman Key Exchange | 2026-04-15 | 7.5 High |
| Validating the order of the public keys in the Diffie-Hellman Key Agreement Protocol, when an approved safe prime is used, allows remote attackers (from the client side) to trigger unnecessarily expensive server-side DHE modular-exponentiation calculations. The client may cause asymmetric resource consumption. The basic attack scenario is that the client must claim that it can only communicate with DHE, and the server must be configured to allow DHE and validate the order of the public key. | ||||
| CVE-2024-5445 | 2026-04-15 | 3.8 Low | ||
| Ecosystem Agent version 4 < 4.1.5.2597 and Ecosystem Agent version 5 < 5.1.4.2473 did not properly validate SSL/TLS certificates, which could allow a malicious actor to perform a Man-in-the-Middle and intercept traffic between the agent and N-able servers from a privileged network position. | ||||
| CVE-2024-42186 | 2026-04-15 | 2.8 Low | ||
| BigFix Patch Download Plug-ins are affected by an insecure protocol support. The application can allow improper handling of SSL certificates validation. | ||||
| CVE-2025-2183 | 1 Palo Alto Networks | 1 Globalprotect App | 2026-04-15 | N/A |
| An insufficient certificate validation issue in the Palo Alto Networks GlobalProtect™ app enables attackers to connect the GlobalProtect app to arbitrary servers. This can enable a local non-administrative operating system user or an attacker on the same subnet to install malicious root certificates on the endpoint and subsequently install malicious software signed by the malicious root certificates on that endpoint. | ||||
| CVE-2024-4063 | 2026-04-15 | 3.7 Low | ||
| A vulnerability was found in EZVIZ CS-C6-21WFR-8 5.2.7 Build 170628. It has been classified as problematic. This affects an unknown part of the component Davinci Application. The manipulation leads to improper certificate validation. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The identifier VDB-261789 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-66001 | 1 Suse | 1 Neuvector | 2026-04-15 | 8.8 High |
| NeuVector supports login authentication through OpenID Connect. However, the TLS verification (which verifies the remote server's authenticity and integrity) for OpenID Connect is not enforced by default. As a result this may expose the system to man-in-the-middle (MITM) attacks. | ||||
| CVE-2025-32057 | 1 Bosch | 1 Infotainment System Ecu | 2026-04-15 | 6.5 Medium |
| The Infotainment ECU manufactured by Bosch which is installed in Nissan Leaf ZE1 – 2020 uses a Redbend service for over-the-air provisioning and updates. HTTPS is used for communication with the back-end server. Due to usage of the default configuration for the underlying SSL engine, the server root certificate is not verified. As a result, an attacker may be able to impersonate a Redbend backend server using a self-signed certificate. First identified on Nissan Leaf ZE1 manufactured in 2020. | ||||
| CVE-2025-54470 | 1 Suse | 1 Neuvector | 2026-04-15 | 8.6 High |
| This vulnerability affects NeuVector deployments only when the Report anonymous cluster data option is enabled. When this option is enabled, NeuVector sends anonymous telemetry data to the telemetry server. In affected versions, NeuVector does not enforce TLS certificate verification when transmitting anonymous cluster data to the telemetry server. As a result, the communication channel is susceptible to man-in-the-middle (MITM) attacks, where an attacker could intercept or modify the transmitted data. Additionally, NeuVector loads the response of the telemetry server is loaded into memory without size limitation, which makes it vulnerable to a Denial of Service(DoS) attack | ||||
| CVE-2025-40801 | 1 Siemens | 8 Comos, Nx, Simcenter 3d and 5 more | 2026-04-15 | 8.1 High |
| A vulnerability has been identified in COMOS V10.6 (All versions < V10.6.1), COMOS V10.6 (All versions < V10.6.1), JT Bi-Directional Translator for STEP (All versions), NX V2412 (All versions < V2412.8900 with Cloud Entitlement (bundled as NX X)), NX V2506 (All versions < V2506.6000 with Cloud Entitlement (bundled as NX X)), Simcenter 3D (All versions < V2506.6000 with Cloud Entitlement (bundled as Simcenter X Mechanical)), Simcenter Femap (All versions < V2506.0002 with Cloud Entitlement (bundled as Simcenter X Mechanical)), Simcenter Studio (All versions < V2506.0001), Simcenter System Architect (All versions < V2506.0001), Tecnomatix Plant Simulation (All versions < V2504.0007). The SALT SDK is missing server certificate validation while establishing TLS connections to the authorization server. This could allow an attacker to perform a man-in-the-middle attack. | ||||
| CVE-2025-52919 | 2026-04-15 | 4.3 Medium | ||
| In Yealink RPS before 2025-05-26, the certificate upload function does not properly validate certificate content, potentially allowing invalid certificates to be uploaded. | ||||