ReportizFlow
Filtered by vendor
Subscriptions
Total
2714 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2017-12211 | 1 Cisco | 2 Ios, Ios Xe | 2025-04-20 | N/A |
| A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640. | ||||
| CVE-2016-6767 | 1 Google | 1 Android | 2025-04-20 | N/A |
| A denial of service vulnerability in Mediaserver could enable an attacker to use a specially crafted file to cause a device hang or reboot. This issue is rated as High due to the possibility of remote denial of service. Product: Android. Versions: 4.4.4. Android ID: A-31833604. | ||||
| CVE-2017-3826 | 1 Cisco | 4 Netflow Generation Appliance 3140, Netflow Generation Appliance 3240, Netflow Generation Appliance 3340 and 1 more | 2025-04-20 | N/A |
| A vulnerability in the Stream Control Transmission Protocol (SCTP) decoder of the Cisco NetFlow Generation Appliance (NGA) with software before 1.1(1a) could allow an unauthenticated, remote attacker to cause the device to hang or unexpectedly reload, causing a denial of service (DoS) condition. The vulnerability is due to incomplete validation of SCTP packets being monitored on the NGA data ports. An attacker could exploit this vulnerability by sending malformed SCTP packets on a network that is monitored by an NGA data port. SCTP packets addressed to the IP address of the NGA itself will not trigger this vulnerability. An exploit could allow the attacker to cause the appliance to become unresponsive or reload, causing a DoS condition. User interaction could be needed to recover the device using the reboot command from the CLI. The following Cisco NetFlow Generation Appliances are vulnerable: NGA 3140, NGA 3240, NGA 3340. Cisco Bug IDs: CSCvc83320. | ||||
| CVE-2017-6609 | 1 Cisco | 1 Adaptive Security Appliance Software | 2025-04-20 | N/A |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. | ||||
| CVE-2017-6653 | 1 Cisco | 1 Identity Services Engine | 2025-04-20 | N/A |
| A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803. | ||||
| CVE-2016-7544 | 2 Cryptopp, Microsoft | 2 Crypto\+\+, Windows | 2025-04-20 | N/A |
| Crypto++ 5.6.4 incorrectly uses Microsoft's stack-based _malloca and _freea functions. The library will request a block of memory to align a table in memory. If the table is later reallocated, then the wrong pointer could be freed. | ||||
| CVE-2016-0780 | 2 Cloudfoundry, Pivotal Software | 2 Cf-release, Cloud Foundry Elastic Runtime | 2025-04-20 | 7.5 High |
| It was discovered that cf-release v231 and lower, Pivotal Cloud Foundry Elastic Runtime 1.5.x versions prior to 1.5.17 and Pivotal Cloud Foundry Elastic Runtime 1.6.x versions prior to 1.6.18 do not properly enforce disk quotas in certain cases. An attacker could use an improper disk quota value to bypass enforcement and consume all the disk on DEAs/CELLs causing a potential denial of service for other applications. | ||||
| CVE-2017-6631 | 1 Cisco | 6 Yesmax Hd, Yesmax Hd Firmware, Yesmaxtotal and 3 more | 2025-04-20 | N/A |
| A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812. | ||||
| CVE-2016-9312 | 2 Microsoft, Ntp | 2 Windows, Ntp | 2025-04-20 | N/A |
| ntpd in NTP before 4.2.8p9, when running on Windows, allows remote attackers to cause a denial of service via a large UDP packet. | ||||
| CVE-2016-5822 | 1 Huawei | 1 Oceanstor 5800 V3 | 2025-04-20 | N/A |
| Huawei Oceanstor 5800 before V300R002C10SPC100 allows remote attackers to cause a denial of service (CPU consumption) via a large number of crafted HTTP packets. | ||||
| CVE-2016-7551 | 2 Debian, Digium | 3 Debian Linux, Asterisk, Certified Asterisk | 2025-04-20 | N/A |
| chain_sip in Asterisk Open Source 11.x before 11.23.1 and 13.x 13.11.1 and Certified Asterisk 11.6 before 11.6-cert15 and 13.8 before 13.8-cert3 allows remote attackers to cause a denial of service (port exhaustion). | ||||
| CVE-2016-10292 | 1 Linux | 1 Linux Kernel | 2025-04-20 | N/A |
| A denial of service vulnerability in the Qualcomm Wi-Fi driver could enable a proximate attacker to cause a denial of service in the Wi-Fi subsystem. This issue is rated as High due to the possibility of remote denial of service. Product: Android. Versions: Kernel-3.10, Kernel-3.18. Android ID: A-34514463. References: QC-CR#1065466. | ||||
| CVE-2016-10227 | 1 Zyxel | 4 Nwa3560-n, Nwa3560-n Firmware, Usg50 and 1 more | 2025-04-20 | N/A |
| Zyxel USG50 Security Appliance and NWA3560-N Access Point allow remote attackers to cause a denial of service (CPU consumption) via a flood of ICMPv4 Port Unreachable packets. | ||||
| CVE-2016-10163 | 1 Virglrenderer Project | 1 Virglrenderer | 2025-04-20 | N/A |
| Memory leak in the vrend_renderer_context_create_internal function in vrend_decode.c in virglrenderer before 0.6.0 allows local guest OS users to cause a denial of service (host memory consumption) by repeatedly creating a decode context. | ||||
| CVE-2016-10186 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2025-04-20 | 7.5 High |
| An issue was discovered on the D-Link DWR-932B router. /var/miniupnpd.conf has no deny rules. | ||||
| CVE-2015-8959 | 1 Imagemagick | 1 Imagemagick | 2025-04-20 | 6.5 Medium |
| coders/dds.c in ImageMagick before 6.9.0-4 Beta allows remote attackers to cause a denial of service (CPU consumption) via a crafted DDS file. | ||||
| CVE-2017-6630 | 1 Cisco | 2 Ip Phone 8800 Series Firmware, Ip Phone 8851 | 2025-04-20 | N/A |
| A vulnerability in the Session Initiation Protocol (SIP) implementation of Cisco IP Phone 8851 11.0(0.1) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to an abnormal SIP message. An attacker could exploit this vulnerability by manipulating the CANCEL packet. An exploit could allow the attacker to cause a disruption of service to the phone. Cisco Bug IDs: CSCvc34795. | ||||
| CVE-2017-6610 | 1 Cisco | 1 Adaptive Security Appliance Software | 2025-04-20 | N/A |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. | ||||
| CVE-2017-6607 | 1 Cisco | 1 Adaptive Security Appliance Software | 2025-04-20 | N/A |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. | ||||
| CVE-2016-10259 | 1 Bluecoat | 8 Ssl Visibility Appliance Sv1800, Ssl Visibility Appliance Sv1800 Firmware, Ssl Visibility Appliance Sv2800 and 5 more | 2025-04-20 | N/A |
| Symantec SSL Visibility (SSLV) 3.8.4FC, 3.9, 3.10 before 3.10.4.1, and 3.11 before 3.11.3.1 is susceptible to a denial-of-service vulnerability that impacts the SSL servers for intercepted SSL connections. A malicious SSL client can, under certain circumstances, temporarily exhaust the TCP connection pool of an SSL server. | ||||