Filtered by vendor Linksys
Subscriptions
Total
235 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2004-0580 | 1 Linksys | 12 Befcmu10, Befn2ps4, Befsr11 and 9 more | 2026-04-16 | N/A |
| DHCP on Linksys BEFSR11, BEFSR41, BEFSR81, and BEFSRU31 Cable/DSL Routers, firmware version 1.45.7, does not properly clear previously used buffer contents in a BOOTP reply packet, which allows remote attackers to obtain sensitive information. | ||||
| CVE-2002-2371 | 1 Linksys | 1 Wet11 | 2026-04-16 | N/A |
| Linksys WET11 firmware 1.31 and 1.32 allows remote attackers to cause a denial of service (crash) via a packet containing the device's hardware address as the source MAC address in the DLC header. | ||||
| CVE-2013-10058 | 1 Linksys | 2 Wrt160nl, Wrt160nv2 | 2026-04-15 | N/A |
| An authenticated OS command injection vulnerability exists in various Linksys router models (tested on WRT160Nv2) running firmware version v2.0.03 via the apply.cgi endpoint. The web interface fails to properly sanitize user-supplied input passed to the ping_size parameter during diagnostic operations. An attacker with valid credentials can inject arbitrary shell commands, enabling remote code execution. | ||||
| CVE-2014-125122 | 1 Linksys | 1 Wrt120n | 2026-04-15 | N/A |
| A stack-based buffer overflow vulnerability exists in the tmUnblock.cgi endpoint of the Linksys WRT120N wireless router. The vulnerability is triggered by sending a specially crafted HTTP POST request with an overly long TM_Block_URL parameter to the endpoint. By exploiting this flaw, an unauthenticated remote attacker can overwrite memory in a controlled manner, enabling them to temporarily reset the administrator password of the device to a blank value. This grants unauthorized access to the router’s web management interface without requiring valid credentials. | ||||
| CVE-2025-6751 | 1 Linksys | 1 E8450 | 2026-04-15 | 8.8 High |
| A vulnerability, which was classified as critical, was found in Linksys E8450 up to 1.2.00.360516. This affects the function set_device_language of the file portal.cgi of the component HTTP POST Request Handler. The manipulation of the argument dut_language leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-6752 | 1 Linksys | 4 Ea7200, Ea7450, Ea7500 and 1 more | 2026-04-15 | 8.8 High |
| A vulnerability has been found in Linksys WRT1900ACS, EA7200, EA7450 and EA7500 up to 20250619 and classified as critical. This vulnerability affects the function SetDefaultConnectionService of the file /upnp/control/Layer3Forwarding of the component IGD. The manipulation of the argument NewDefaultConnectionService leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2013-10062 | 1 Linksys | 1 E1500 | 2026-04-15 | N/A |
| A directory traversal vulnerability exists in Linksys router's web interface (tested on the E1500 model firmware versions 1.0.00, 1.0.04, and 1.0.05), specifically in the /apply.cgi endpoint. Authenticated attackers can exploit the next_page POST parameter to access arbitrary files outside the intended web root by injecting traversal sequences. This allows exposure of sensitive system files and configuration data. | ||||
| CVE-2025-34037 | 1 Linksys | 6 E1000, E1200, E1500 and 3 more | 2026-04-15 | N/A |
| An OS command injection vulnerability exists in various models of E-Series Linksys routers via the /tmUnblock.cgi and /hndUnblock.cgi endpoints over HTTP on port 8080. The CGI scripts improperly process user-supplied input passed to the ttcp_ip parameter without sanitization, allowing unauthenticated attackers to inject shell commands. This vulnerability was reported to be exploited in the wild by the "TheMoon" worm in 2014 to deploy a MIPS ELF payload, enabling arbitrary code execution on the router. Additionally, this vulnerability may affect other Linksys products to include, but not limited to, WAG/WAP/WES/WET/WRT-series router models and Wireless-N access points and routers. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-06 UTC. | ||||
| CVE-2013-3307 | 1 Linksys | 2 E1000, E1200 | 2026-04-15 | 8.3 High |
| Linksys E1000 devices through 2.1.02, E1200 devices before 2.0.05, and E3200 devices through 1.0.04 allow OS command injection via shell metacharacters in the apply.cgi ping_ip parameter on TCP port 52000. | ||||
| CVE-2026-4558 | 1 Linksys | 2 Mr9600, Mr9600 Firmware | 2026-03-25 | 8.8 High |
| A flaw has been found in Linksys MR9600 2.0.6.206937. Affected is the function smartConnectConfigure of the file SmartConnect.lua. Executing a manipulation of the argument configApSsid/configApPassphrase/srpLogin/srpPassword can lead to os command injection. The attack may be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-60690 | 1 Linksys | 2 E1200, E1200 Firmware | 2026-03-17 | 8.8 High |
| A stack-based buffer overflow exists in the get_merge_ipaddr function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to four user-supplied CGI parameters matching <parameter>_0~3 into a fixed-size buffer (a2) without bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication. | ||||
| CVE-2025-29228 | 1 Linksys | 2 E5600, E5600 Firmware | 2026-01-06 | 9.8 Critical |
| Linksys E5600 V1.1.0.26 is vulnerable to command injection in the runtime.macClone function via the mc.ip parameter. | ||||
| CVE-2025-29229 | 1 Linksys | 2 E5600, E5600 Firmware | 2026-01-06 | 9.8 Critical |
| linksys E5600 V1.1.0.26 is vulnerable to command injection in the function ddnsStatus. | ||||
| CVE-2025-44654 | 1 Linksys | 2 E2500, E2500 Firmware | 2026-01-03 | 9.8 Critical |
| In Linksys E2500 3.0.04.002, the chroot_local_user option is enabled in the vsftpd configuration file. This could lead to unauthorized access to system files, privilege escalation, or use of the compromised server as a pivot point for internal network attacks. | ||||
| CVE-2024-40495 | 1 Linksys | 2 E2500, E2500 Firmware | 2026-01-02 | 8 High |
| A vulnerability was discovered in Linksys Router E2500 with firmware 2.0.00, allows authenticated attackers to execute arbitrary code via the hnd_parentalctrl_unblock function. | ||||
| CVE-2025-29231 | 1 Linksys | 2 E5600, E5600 Firmware | 2025-12-31 | 6.1 Medium |
| A stored cross-site scripting (XSS) vulnerability in the page_save component of Linksys E5600 V1.1.0.26 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the hostname and domainName parameters. | ||||
| CVE-2025-52692 | 1 Linksys | 2 E9450-sg, E9450-sg Firmware | 2025-12-23 | 8.8 High |
| Successful exploitation of the vulnerability could allow an attacker with local network access to send a specially crafted URL to access certain administration functions without login credentials. | ||||
| CVE-2025-14133 | 1 Linksys | 12 Re6250, Re6250 Firmware, Re6300 and 9 more | 2025-12-10 | 8.8 High |
| A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function AP_get_wireless_clientlist_setClientsName of the file mod_form.so. Performing manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-14134 | 1 Linksys | 12 Re6250, Re6250 Firmware, Re6300 and 9 more | 2025-12-10 | 8.8 High |
| A vulnerability was determined in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function RE2000v2Repeater_get_wireless_clientlist_setClientsName of the file mod_form.so. Executing manipulation of the argument clientsname_0 can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-14135 | 1 Linksys | 12 Re6250, Re6250 Firmware, Re6300 and 9 more | 2025-12-10 | 8.8 High |
| A vulnerability was identified in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function AP_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
ReportizFlow