Filtered by vendor Linux Subscriptions
Filtered by product Linux Subscriptions
Total 503 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2026-99240 1 Linux 2 Linux, Linux Kernel 2026-11-03 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: error damos_commit_quota_goal() for zero target_value Patch series "mm/damon: move zero damos quota target_value handling to the core layer". Having zero DAMOS quota target value can cause division by zero. DAMON API callers are checking the target value parameters to avoid that. It is easy to make mistakes in some of the multiple API callers. Move that to the core layer. Patch 1 adds the corner case handling into the core layer DAMON parameters validation logic. Patches 2 and 3 remove no more needed DAMON API callers side handling of the corner case in DAMON_LRU_SORT and DMON_SAMPLIE_MTIER, respectively. This patch (of 3): If a DAMOS scheme has a damos_quota_goal of zero target_value, damos_quota_goal() could trigger division-by-zero error. Hence each DAMON API callers should do the zero target_value validation. It is easy to make mistakes. Actually such bugs in DAMON_LRU_SORT and DAMON_SAMPLE_MTIER were found and fixed [1]. It is better to handle the corner case only once in the core layer, instead of multiple places in all DAMON API callers. One straightforward option is using an alternative denominator for the corner case in the damos_quota_goal(). However, the zero target_value is meaningless. In this case, the quota goal is always evaluated as achieved or over-achieved. The quota will only keep being reduced. Simply avoid using zero target_value by adding a check in the core layer DAMOS quota goal parameters validation/commit path, damos_commit_quota_goal(). Update it to return an error in the case. Also update its caller to propagate the error.
CVE-2026-99217 1 Linux 2 Linux, Linux Kernel 2026-11-03 4.1 Medium
This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
CVE-2026-99239 1 Linux 2 Linux, Linux Kernel 2026-11-03 7.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn l2cap_chan may be linked to l2cap_conn at most once. This is assumed in several places, eg l2cap_chan_del cleanup. There is a TOCTOU race where the invariant is violated: [Task 1] [Task 2] l2cap_chan_connect l2cap_sock_bind l2cap_chan_lock lock_sock l2cap_state_change if (sk->sk_state != BT_OPEN) chan->state = BT_CONNECT l2cap_sock_state_change_cb chan->state = BT_BOUND sk->sk_state = BT_BOUND lock_sock <------------------ release_sock sk->sk_state = BT_CONNECT l2cap_sock_connect() does not check sk->sk_state, so since chan->state is now BT_BOUND, subsequent connect() ends up with second __l2cap_chan_add. Explicitly document and check the invariant in __l2cap_chan_add with WARN_ON_ONCE. The only callsite where it could be hit is l2cap_chan_connect, so add pre-check there to avoid relying on chan->state. chan->state read/write is not properly guarded currently so there can be other TOCTOUC problems. Add l2cap_lock_chan in l2cap_sock_bind() to guard chan->state write.
CVE-2026-99237 1 Linux 2 Linux, Linux Kernel 2026-11-03 7.8 High
In the Linux kernel, the following vulnerability has been resolved: tracing: Hold trace_types_lock when resetting last boot data from readers update_last_data_if_empty() is called from tracing_open() with O_TRUNC, tracing_read_pipe() and tracing_buffers_read() without trace_types_lock. Two readers can both pass the LAST_BOOT test and free module_delta twice, and a module notifier can update module_delta while it is being freed. Take trace_types_lock in those paths and keep the callers that already hold it on an unlocked variant.
CVE-2026-99235 1 Linux 2 Linux, Linux Kernel 2026-11-03 7.8 High
In the Linux kernel, the following vulnerability has been resolved: tracing: Save the event file instead of the compatible histogram create_field_var_hist() creates a histogram on the matched event to supply a field variable, and records it on the target so it can be torn down later: hist_data = find_compatible_hist(target_hist_data, file); ... /* Save the compatible histogram information */ var_hist->hist_data = hist_data; hist_data is not the histogram it creates. It is one that was already there, whose keys the new one copies. The saved pointer has a single user, unregister_field_var_hists(), which runs when the target is removed: file = hist_data->field_var_hists[i]->hist_data->event_file; find_compatible_hist() matches on keys alone, so it can pick one with no variables of its own. check_var_refs() then returns false and the user can remove it while the target still points at it: BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320 Read of size 8 at addr ffff8880093b90e0 by task init/1 Freed by task 1: kfree+0x154/0x420 event_hist_trigger_free+0x1d5/0x320 event_hist_trigger_parse+0x35f3/0x69e0 trigger_process_regex+0x1a6/0x250 Save the event file instead. It is all the dereference ever wanted, and it does not go away when the user removes a trigger.
CVE-2026-99233 1 Linux 2 Linux, Linux Kernel 2026-11-03 7.8 High
In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Verify event_call identity when updating synth_event refcount In event_hist_trigger_parse() and hist_unreg_all(), the histogram registration and unregistration paths look up find_synth_event() using trace_event_name(file->event_call) and adjust se->ref if a match is found. Because find_synth_event() only compares the event basename, registering or removing a histogram on a non-synthetic trace event whose basename matches a synthetic event erroneously modifies the synthetic event's reference count. If a histogram is registered on the non-synthetic event before the synthetic event is created and removed afterwards, se->ref is decremented without a matching increment, allowing the synthetic event to be freed while an active histogram action still holds a pointer to it. Introduce find_synth_event_call() to verify that &se->call matches file->event_call before adjusting se->ref.
CVE-2026-99231 1 Linux 2 Linux, Linux Kernel 2026-11-03 7.8 High
In the Linux kernel, the following vulnerability has been resolved: io_uring/waitid: own the request before clearing ->head io_waitid_remove_wq() only takes the wait queue lock if ->head is set. io_waitid_wait() clears ->head first thing, before it tries to become the owner of the request by bumping ->refs. If somebody else owns the request at that point, nothing keeps it from completing the request while the wake up handler is still going to touch it: CPU0 (io_waitid_wait) CPU1 (io_waitid, holds a ref) list_del_init(&wait->entry) smp_store_release(&iw->head, NULL) __do_wait() finds another child io_waitid_remove_wq() // ->head == NULL, no locking io_waitid_finish(), IOU_COMPLETE // request freed and reused atomic_fetch_inc(&iw->refs) The same goes for __io_waitid_cancel() if it claims the request in that window. ->refs is part of the per opcode data of the request, so this increments whatever the next user of the request keeps there. If that happens to be zero, the handler concludes that it owns the request, and queues io_waitid_cb() for it. With the window held open by a delay, and the request reused for a receive that is waiting for data: BUG: KASAN: slab-use-after-free in __wake_up_common+0x1ca/0x1f0 __wake_up_sync_key+0x36/0x50 sock_def_readable+0xf1/0x420 unix_stream_sendmsg+0x60b/0x1110 Allocated by task 87: io_arm_apoll+0x1ed/0x940 Freed by task 87: __io_submit_flush_completions+0x118d/0x1a10 tctx_task_work_run+0x327/0x950 Only clear ->head once the handler owns the request. If it doesn't, the owner finds ->head set and has to wait for the lock, which is held by the caller of the handler. Deleting the already deleted entry again is harmless.
CVE-2026-99250 1 Linux 2 Linux, Linux Kernel 2026-11-03 N/A
In the Linux kernel, the following vulnerability has been resolved: printk: Postpone kthread startup There have been various bug reports related to SMP systems hanging on boot. The reports vary but seem to have some overlap with regard to missed IPI's during SMP setup. The reports also show that reverting NBCON console usage allows the bugs to disappear. The NBCON kthreads for console printing are started very early during boot using early_initcall(). Since these kthreads are asynchronously enabling/disabling interrupts during early boot, they may be interfering with early SMP setup on some hardware platforms. Starting the console printing kthreads later has shown to avoid the hanging on systems that could previously reproduce the issue. Postpone kthread starting until after all arch initcalls have completed.
CVE-2026-99248 1 Linux 2 Linux, Linux Kernel 2026-11-03 N/A
In the Linux kernel, the following vulnerability has been resolved: i2c: xiic: restore non-managed runtime PM to fix clk WARN flood The devres conversion replaced manual pm_runtime_enable()/disable() with devm_pm_runtime_set_active_enabled() and dropped the remove-time runtime PM teardown. The managed release tears runtime PM down in the wrong order: it calls pm_runtime_dont_use_autosuspend() before pm_runtime_disable(), i.e. while runtime PM is still enabled, and devres is LIFO so the devm_clk_get_enabled() release runs afterwards. At remove(), pm_runtime_put_sync() leaves the device active with the autosuspend timer armed. Clearing use_autosuspend then makes rpm_idle() suspend immediately, and xiic_i2c_runtime_suspend() clk_disable()s the clock. The later devm_clk_get_enabled() release clk_disable_unprepare()s the already-disabled clock, so clk_core_disable() WARNs ("clkN already disabled") on every teardown. Drop the managed helper and restore the non-managed runtime PM setup and teardown, so runtime PM is enabled once in probe and disabled once in remove and the clock enable count stays balanced. Order the remove teardown so runtime PM is disabled before the usage count is dropped: pm_runtime_disable() followed by pm_runtime_put_noidle() instead of pm_runtime_put_sync(). Dropping the count first with autosuspend still enabled arms the autosuspend timer, and a preemption before pm_runtime_disable() lets it expire, suspend the device and clk_disable() the clock, which the devm release then disables again - the same WARN. Restore the non-managed IRQ request as well. The probe error paths now unwind runtime PM by hand via goto, and a devm-registered handler is only freed later during devres unwind, so it would stay live across the manual teardown (and across any future failing step added after it). Request the IRQ with request_threaded_irq() and free it explicitly in the probe error path and in remove. The probe error path also clears use_autosuspend, to match the teardown in remove().
CVE-2026-99251 1 Linux 2 Linux, Linux Kernel 2026-11-03 N/A
In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: Avoid infinite retry loop in init_vp_index() There is a retry loop in init_vp_index() where the CPUs from a certain node are stripped out if they have already been in the allocated cpumask or not in HK_TYPE_MANAGED_IRQ housekeeping cpumask. If there is no CPU left, the allocated cpumask is ignored and the process is retried again. However, if the HK_TYPE_MANAGED_IRQ housekeeping cpumask turns out not to contain any CPU in that particular node, that will become an infinite retry loop. This particular problem was reported by sashiko [1]. This should rarely happen, but we still need to guard against this. Fix this infinite loop problem by also skipping NUMA node that has no housekeeping CPU in the inner while loop of init_vp_index(). Also update the early abort check to check for the absence of online housekeeping CPUs instead of just the emptiness of the cpumask. As the outer for loop will only be reached if the housekeeping cpumask has at least one online CPU, a NUMA node with housekeeping CPUs will eventually be found.
CVE-2026-99257 1 Linux 2 Linux, Linux Kernel 2026-11-03 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: gpio: shared: gracefully handle no-device lookup of shared GPIOs We use platform lookup tables for shared GPIOs. This mechanism needs a struct device to work so fwnode-based lookup with no device associated currently causes a NULL-pointer deference. Adding this functionality will require a larger rework and it has never worked anyway so add a check that allows the kernel to gracefully handle this situation with an error ahead of implementing that functionality as a new feature.
CVE-2026-99261 1 Linux 2 Linux, Linux Kernel 2026-11-03 N/A
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: correct reservation fence slots for userq per-vm BOs eviction It fixes both the move overflow and the eviction fence add for evicting these per-vm BOs.
CVE-2026-99247 1 Linux 2 Linux, Linux Kernel 2026-11-03 N/A
In the Linux kernel, the following vulnerability has been resolved: tracing: Do not initialize tracefs work if tracing is disabled If trace buffer allocation fails during early boot (e.g. in early_trace_init() -> allocate_trace_buffers()), tracing_disabled is left set to 1 and the global trace array events list remains uninitialized. Later during boot, tracer_init_tracefs() (invoked via fs_initcall) queues tracerfs_init_work asynchronously without checking if tracing was disabled. When tracer_init_tracefs_work_func() runs, it calls event_trace_init() and init_tracer_tracefs(&global_trace, NULL) unconditionally. This leads to __find_event_file() dereferencing an uninitialized tr->events list, causing an early boot NULL pointer dereference Oops: BUG: Kernel NULL pointer dereference on read at 0x00000010 Faulting instruction address: 0xc000000000485be0 Oops: Kernel access of bad area, sig: 7 [#1] ... NIP [c000000000485be0] __find_event_file+0x70/0x3c0 LR [c000000000448874] init_tracer_tracefs+0x274/0xc80 Call Trace: init_tracer_tracefs+0x274/0xc80 tracer_init_tracefs_work_func+0x50/0x320 process_one_work+0x1e8/0x5c0 worker_thread+0x1dc/0x3d0 kthread+0x194/0x1b0 start_kernel_thread+0x14/0x18 Check tracing_disabled at the beginning of tracer_init_tracefs_work_func() and return immediately if tracing is disabled or failed to initialize, preventing the crash.
CVE-2026-99249 1 Linux 2 Linux, Linux Kernel 2026-11-03 N/A
In the Linux kernel, the following vulnerability has been resolved: pid_namespace: make zap_pid_ns_processes() freezable When the init of a pid namespace exits, zap_pid_ns_processes() waits until all other pids in the namespace are freed. A tracer outside the namespace that does not reap its traced zombies keeps those pids allocated, so this wait has no upper bound, and while it lasts every suspend attempt fails: Freezing user space processes failed after 20.006 seconds (2 tasks refusing to freeze, wq_busy=0): Neither wait is freezable. The first loop sleeps in do_wait(), which returns -ERESTARTSYS on the freezer's fake signal; the loop then clears TIF_SIGPENDING and waits again without ever freezing. The final loop sleeps in TASK_INTERRUPTIBLE, and since nothing clears TIF_SIGPENDING there, schedule() returns immediately after the first freeze attempt and the task spins until the wait ends. Sleep in TASK_INTERRUPTIBLE | TASK_FREEZABLE in do_wait(), so that the freezer can freeze tasks waiting there directly, and in TASK_IDLE | TASK_FREEZABLE in the final loop, like coredump_task_exit() does. This was hit with Chromium-based browsers: crashpad ptrace-attaches the threads of a crashed renderer, which is a pid namespace init, and does not reap those killed during the dump.
CVE-2026-99069 1 Linux 2 Linux, Linux Kernel 2026-11-03 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: Input: ati_remote2 - fix type confusion in device attribute handlers Previously, the channel_mask and mode_mask attributes were registered on the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b ("Input: ati-remote2 - use driver core to instantiate device attributes") converted the driver to let the driver core manage them via dev_groups in struct usb_driver, the attributes moved to the bound usb_interface devices, but the show and store callbacks were not updated accordingly. As a result, the callbacks still invoked to_usb_device() on a device pointer belonging to a struct usb_interface, producing an invalid usb_device pointer. Use to_usb_interface() directly in the attribute handlers to obtain the interface and its driver data.
CVE-2026-99076 1 Linux 2 Linux, Linux Kernel 2026-11-03 3.7 Low
In the Linux kernel, the following vulnerability has been resolved: ipv6: udp: Create exceptions before socket matching Currently, when ICMPv6 Packet Too Big and Redirect Message packets are locally delivered and quote a UDP packet, an exception is only created in the IPv6 exception cache if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the exception cache in order to discover the ephemeral port used by a connected UDP socket. Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and commit a00df2caffed ("ipv6: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the exception cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating an exception, even before trying to find a matching socket. Do that by calling ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in an exception being created or updated in the cache that the attacker can observe. Pass the ifindex of the ingress device and the default uid, in a similar fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any nexthop in ip6_redirect_nh_match() and no exception would be created in response to a Redirect Message. Note that this does not allow attackers to create exceptions that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMPv6 error that quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ip6_sk_update_pmtu() / ip6_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the exception cache of the nexthop resolved by the no socket helpers and another in the exception cache of the nexthop used by the socket.
CVE-2026-99017 1 Linux 2 Linux, Linux Kernel 2026-11-03 7 High
In the Linux kernel, the following vulnerability has been resolved: riscv: errata: select RISCV_ALTERNATIVE_EARLY for THEAD GHOSTWRITE errata_probe_ghostwrite() only marks the CPU as vulnerable when it is called at the RISCV_ALTERNATIVES_EARLY_BOOT stage, and the mitigation in ghostwrite_enable_mitigation() only takes effect if the vulnerable state was recorded before the boot alternatives are patched. The early boot stage is only executed when CONFIG_RISCV_ALTERNATIVE_EARLY is enabled, which currently is only selected by ERRATA_THEAD_MAE. In a kernel built with ERRATA_THEAD_GHOSTWRITE=y but ERRATA_THEAD_MAE=n, the early alternatives never run, so ghostwrite_state is never set to VULNERABLE: ghostwrite_enable_mitigation() returns false, xtheadvector remains enabled, and sysfs reports "Not affected" on a vulnerable T-Head C9xx CPU. Select RISCV_ALTERNATIVE_EARLY from ERRATA_THEAD_GHOSTWRITE so that the vulnerability is detected in the early boot stage and the default mitigation is applied.
CVE-2026-99072 1 Linux 2 Linux, Linux Kernel 2026-11-03 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ipv4: stop route notification sizing when nexthop group shrinks Commit 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") added an RCU-only fib_nlmsg_size() call for asynchronous hardware flag notifications. fib_nlmsg_size() checks fib_info_num_path() before each iteration, then fib_info_nhc() independently reloads nh->nh_grp. If RTM_NEWNEXTHOP replaces a group with fewer paths between those loads, fib_info_nhc() returns NULL and fib_nexthop_nlmsg_size() dereferences it. Stop sizing when the indexed path is absent. Nexthop groups are dense, so the current snapshot has no later path.
CVE-2026-99187 1 Linux 2 Linux, Linux Kernel 2026-11-02 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pmu_migrate_context() leaving events behind __perf_pmu_remove() walks the group leaders of a CPU and PMU with perf_event_groups_for_cpu_pmu(), removing each one as it goes. perf_remove_from_context() takes the leader out of the groups rbtree, after which rb_next() on that node returns NULL, prematurely ending the walk. Other groups stay behind in the source context. On CPU hotplug, they are then torn down with the dying CPU. They keep running until teardown, while the PMU's interrupt and migrated events are on a new CPU, which drivers rely on never happening. Walk ctx->event_list instead and pick out the PMU's events by their pmu_ctx.
CVE-2026-99189 1 Linux 2 Linux, Linux Kernel 2026-11-02 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: gpio: mxc: fix race between chained IRQ handler install and probe completion mxc_update_irq_chained_handler() is called before the IRQ domain, the generic IRQ chip, and the port list entry are set up. If an interrupt arrives in that window: - mx3_gpio_irq_handler() calls generic_handle_domain_irq() with port->domain still NULL. - mx2_gpio_irq_handler() walks mxc_gpio_ports, but the port has not been added to the list yet. Additionally, if any of the subsequent probe steps (gpio_generic_chip_init(), devm_gpiochip_add_data(), irq_domain_create_legacy(), or mxc_gpio_init_gc()) fail, the error paths never unregister the chained handler, leaving a dangling handler that points at freed memory. Move the handler installation after all its dependencies are ready and after list_add_tail(), so the handler is never live while the data structures it touches are incomplete, and is never installed if probe fails.