Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
19590 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50726 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix possible use-after-free in async command interface mlx5_cmd_cleanup_async_ctx should return only after all its callback handlers were completed. Before this patch, the below race between mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and lead to a use-after-free: 1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e. elevated by 1, a single inflight callback). 2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1. 3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and is about to call wake_up(). 4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns immediately as the condition (num_inflight == 0) holds. 5. mlx5_cmd_cleanup_async_ctx returns. 6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx object. 7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed object. Fix it by syncing using a completion object. Mark it completed when num_inflight reaches 0. Trace: BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270 Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0 CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x57/0x7d print_report.cold+0x2d5/0x684 ? do_raw_spin_lock+0x23d/0x270 kasan_report+0xb1/0x1a0 ? do_raw_spin_lock+0x23d/0x270 do_raw_spin_lock+0x23d/0x270 ? rwlock_bug.part.0+0x90/0x90 ? __delete_object+0xb8/0x100 ? lock_downgrade+0x6e0/0x6e0 _raw_spin_lock_irqsave+0x43/0x60 ? __wake_up_common_lock+0xb9/0x140 __wake_up_common_lock+0xb9/0x140 ? __wake_up_common+0x650/0x650 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kasan_set_track+0x21/0x30 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kfree+0x1ba/0x520 ? do_raw_spin_unlock+0x54/0x220 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core] ? dump_command+0xcc0/0xcc0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core] cmd_comp_notifier+0x7e/0xb0 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 ? irq_release+0x140/0x140 [mlx5_core] irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x1f2/0x620 handle_irq_event+0xb2/0x1d0 handle_edge_irq+0x21e/0xb00 __common_interrupt+0x79/0x1a0 common_interrupt+0x78/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x42/0x60 Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00 RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3 R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005 R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000 ? default_idle_call+0xcc/0x450 default_idle_call+0xec/0x450 do_idle+0x394/0x450 ? arch_cpu_idle_exit+0x40/0x40 ? do_idle+0x17/0x450 cpu_startup_entry+0x19/0x20 start_secondary+0x221/0x2b0 ? set_cpu_sibling_map+0x2070/0x2070 secondary_startup_64_no_verify+0xcd/0xdb </TASK> Allocated by task 49502: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 kvmalloc_node+0x48/0xe0 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core] mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1c ---truncated--- | ||||
| CVE-2025-68352 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix out-of-bounds memory access in ch341_transfer_one Discovered by Atuin - Automated Vulnerability Discovery Engine. The 'len' variable is calculated as 'min(32, trans->len + 1)', which includes the 1-byte command header. When copying data from 'trans->tx_buf' to 'ch341->tx_buf + 1', using 'len' as the length is incorrect because: 1. It causes an out-of-bounds read from 'trans->tx_buf' (which has size 'trans->len', i.e., 'len - 1' in this context). 2. It can cause an out-of-bounds write to 'ch341->tx_buf' if 'len' is CH341_PACKET_LENGTH (32). Writing 32 bytes to ch341->tx_buf + 1 overflows the buffer. Fix this by copying 'len - 1' bytes. | ||||
| CVE-2022-50735 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: do not run mt76u_status_worker if the device is not running Fix the following NULL pointer dereference avoiding to run mt76u_status_worker thread if the device is not running yet. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 98 Comm: kworker/u2:2 Not tainted 5.14.0+ #78 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mt76 mt76u_tx_status_data RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: mt76x02_send_tx_status+0x1d2/0xeb0 mt76x02_tx_status_data+0x8e/0xd0 mt76u_tx_status_data+0xe1/0x240 process_one_work+0x92b/0x1460 worker_thread+0x95/0xe00 kthread+0x3a1/0x480 ret_from_fork+0x1f/0x30 Modules linked in: --[ end trace 8df5d20fc5040f65 ]-- RIP: 0010:mt76x02_mac_fill_tx_status.isra.0+0x82c/0x9e0 Code: c5 48 b8 00 00 00 00 00 fc ff df 80 3c 02 00 0f 85 94 01 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 34 24 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 89 01 00 00 41 8b 16 41 0f b7 RSP: 0018:ffffc900005af988 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffc900005afae8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff832fc661 RDI: ffffc900005afc2a RBP: ffffc900005afae0 R08: 0000000000000001 R09: fffff520000b5f3c R10: 0000000000000003 R11: fffff520000b5f3b R12: ffff88810b6132d8 R13: 000000000000ffff R14: 0000000000000000 R15: ffffc900005afc28 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa0eda6a000 CR3: 0000000118f17000 CR4: 0000000000750ef0 PKRU: 55555554 Moreover move stat_work schedule out of the for loop. | ||||
| CVE-2023-53857 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: bpf_sk_storage: Fix invalid wait context lockdep report './test_progs -t test_local_storage' reported a splat: [ 27.137569] ============================= [ 27.138122] [ BUG: Invalid wait context ] [ 27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G O [ 27.139542] ----------------------------- [ 27.140106] test_progs/1729 is trying to lock: [ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130 [ 27.141834] other info that might help us debug this: [ 27.142437] context-{5:5} [ 27.142856] 2 locks held by test_progs/1729: [ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40 [ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0 [ 27.145855] stack backtrace: [ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a #247 [ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 27.149127] Call Trace: [ 27.149490] <TASK> [ 27.149867] dump_stack_lvl+0x130/0x1d0 [ 27.152609] dump_stack+0x14/0x20 [ 27.153131] __lock_acquire+0x1657/0x2220 [ 27.153677] lock_acquire+0x1b8/0x510 [ 27.157908] local_lock_acquire+0x29/0x130 [ 27.159048] obj_cgroup_charge+0xf4/0x3c0 [ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0 [ 27.161931] __kmem_cache_alloc_node+0x51/0x210 [ 27.163557] __kmalloc+0xaa/0x210 [ 27.164593] bpf_map_kzalloc+0xbc/0x170 [ 27.165147] bpf_selem_alloc+0x130/0x510 [ 27.166295] bpf_local_storage_update+0x5aa/0x8e0 [ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0 [ 27.169199] bpf_map_update_value+0x415/0x4f0 [ 27.169871] map_update_elem+0x413/0x550 [ 27.170330] __sys_bpf+0x5e9/0x640 [ 27.174065] __x64_sys_bpf+0x80/0x90 [ 27.174568] do_syscall_64+0x48/0xa0 [ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 27.175932] RIP: 0033:0x7effb40e41ad [ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8 [ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141 [ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad [ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002 [ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788 [ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000 [ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000 [ 27.184958] </TASK> It complains about acquiring a local_lock while holding a raw_spin_lock. It means it should not allocate memory while holding a raw_spin_lock since it is not safe for RT. raw_spin_lock is needed because bpf_local_storage supports tracing context. In particular for task local storage, it is easy to get a "current" task PTR_TO_BTF_ID in tracing bpf prog. However, task (and cgroup) local storage has already been moved to bpf mem allocator which can be used after raw_spin_lock. The splat is for the sk storage. For sk (and inode) storage, it has not been moved to bpf mem allocator. Using raw_spin_lock or not, kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context. However, the local storage helper requires a verifier accepted sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running a bpf prog in a kzalloc unsafe context and also able to hold a verifier accepted sk pointer) could happen. This patch avoids kzalloc after raw_spin_lock to silent the splat. There is an existing kzalloc before the raw_spin_lock. At that point, a kzalloc is very likely required because a lookup has just been done before. Thus, this patch always does the kzalloc before acq ---truncated--- | ||||
| CVE-2025-68350 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix divide-by-zero in exfat_allocate_bitmap The variable max_ra_count can be 0 in exfat_allocate_bitmap(), which causes a divide-by-zero error in the subsequent modulo operation (i % max_ra_count), leading to a system crash. When max_ra_count is 0, it means that readahead is not used. This patch load the bitmap without readahead. | ||||
| CVE-2025-40004 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/9p: Fix buffer overflow in USB transport layer A buffer overflow vulnerability exists in the USB 9pfs transport layer where inconsistent size validation between packet header parsing and actual data copying allows a malicious USB host to overflow heap buffers. The issue occurs because: - usb9pfs_rx_header() validates only the declared size in packet header - usb9pfs_rx_complete() uses req->actual (actual received bytes) for memcpy This allows an attacker to craft packets with small declared size (bypassing validation) but large actual payload (triggering overflow in memcpy). Add validation in usb9pfs_rx_complete() to ensure req->actual does not exceed the buffer capacity before copying data. | ||||
| CVE-2022-50744 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a hard lockup similar to the call trace below may occur. The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer interrupts as expected, so change the strength of the spin lock to _irq. Kernel panic - not syncing: Hard LOCKUP CPU: 3 PID: 110402 Comm: cat Kdump: loaded exception RIP: native_queued_spin_lock_slowpath+91 [IRQ stack] native_queued_spin_lock_slowpath at ffffffffb814e30b _raw_spin_lock at ffffffffb89a667a lpfc_rx_monitor_record at ffffffffc0a73a36 [lpfc] lpfc_cmf_timer at ffffffffc0abbc67 [lpfc] __hrtimer_run_queues at ffffffffb8184250 hrtimer_interrupt at ffffffffb8184ab0 smp_apic_timer_interrupt at ffffffffb8a026ba apic_timer_interrupt at ffffffffb8a01c4f [End of IRQ stack] apic_timer_interrupt at ffffffffb8a01c4f lpfc_rx_monitor_report at ffffffffc0a73c80 [lpfc] lpfc_rx_monitor_read at ffffffffc0addde1 [lpfc] full_proxy_read at ffffffffb83e7fc3 vfs_read at ffffffffb833fe71 ksys_read at ffffffffb83402af do_syscall_64 at ffffffffb800430b entry_SYSCALL_64_after_hwframe at ffffffffb8a000ad | ||||
| CVE-2025-40273 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: free copynotify stateid in nfs4_free_ol_stateid() Typically copynotify stateid is freed either when parent's stateid is being close/freed or in nfsd4_laundromat if the stateid hasn't been used in a lease period. However, in case when the server got an OPEN (which created a parent stateid), followed by a COPY_NOTIFY using that stateid, followed by a client reboot. New client instance while doing CREATE_SESSION would force expire previous state of this client. It leads to the open state being freed thru release_openowner-> nfs4_free_ol_stateid() and it finds that it still has copynotify stateid associated with it. We currently print a warning and is triggerred WARNING: CPU: 1 PID: 8858 at fs/nfsd/nfs4state.c:1550 nfs4_free_ol_stateid+0xb0/0x100 [nfsd] This patch, instead, frees the associated copynotify stateid here. If the parent stateid is freed (without freeing the copynotify stateids associated with it), it leads to the list corruption when laundromat ends up freeing the copynotify state later. [ 1626.839430] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 1626.842828] Modules linked in: nfnetlink_queue nfnetlink_log bluetooth cfg80211 rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd nfs_acl lockd grace nfs_localio ext4 crc16 mbcache jbd2 overlay uinput snd_seq_dummy snd_hrtimer qrtr rfkill vfat fat uvcvideo snd_hda_codec_generic videobuf2_vmalloc videobuf2_memops snd_hda_intel uvc snd_intel_dspcfg videobuf2_v4l2 videobuf2_common snd_hda_codec snd_hda_core videodev snd_hwdep snd_seq mc snd_seq_device snd_pcm snd_timer snd soundcore sg loop auth_rpcgss vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs 8021q garp stp llc mrp nvme ghash_ce e1000e nvme_core sr_mod nvme_keyring nvme_auth cdrom vmwgfx drm_ttm_helper ttm sunrpc dm_mirror dm_region_hash dm_log iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse dm_multipath dm_mod nfnetlink [ 1626.855594] CPU: 2 UID: 0 PID: 199 Comm: kworker/u24:33 Kdump: loaded Tainted: G B W 6.17.0-rc7+ #22 PREEMPT(voluntary) [ 1626.857075] Tainted: [B]=BAD_PAGE, [W]=WARN [ 1626.857573] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024 [ 1626.858724] Workqueue: nfsd4 laundromat_main [nfsd] [ 1626.859304] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1626.860010] pc : __list_del_entry_valid_or_report+0x148/0x200 [ 1626.860601] lr : __list_del_entry_valid_or_report+0x148/0x200 [ 1626.861182] sp : ffff8000881d7a40 [ 1626.861521] x29: ffff8000881d7a40 x28: 0000000000000018 x27: ffff0000c2a98200 [ 1626.862260] x26: 0000000000000600 x25: 0000000000000000 x24: ffff8000881d7b20 [ 1626.862986] x23: ffff0000c2a981e8 x22: 1fffe00012410e7d x21: ffff0000920873e8 [ 1626.863701] x20: ffff0000920873e8 x19: ffff000086f22998 x18: 0000000000000000 [ 1626.864421] x17: 20747562202c3839 x16: 3932326636383030 x15: 3030666666662065 [ 1626.865092] x14: 6220646c756f6873 x13: 0000000000000001 x12: ffff60004fd9e4a3 [ 1626.865713] x11: 1fffe0004fd9e4a2 x10: ffff60004fd9e4a2 x9 : dfff800000000000 [ 1626.866320] x8 : 00009fffb0261b5e x7 : ffff00027ecf2513 x6 : 0000000000000001 [ 1626.866938] x5 : ffff00027ecf2510 x4 : ffff60004fd9e4a3 x3 : 0000000000000000 [ 1626.867553] x2 : 0000000000000000 x1 : ffff000096069640 x0 : 000000000000006d [ 1626.868167] Call trace: [ 1626.868382] __list_del_entry_valid_or_report+0x148/0x200 (P) [ 1626.868876] _free_cpntf_state_locked+0xd0/0x268 [nfsd] [ 1626.869368] nfs4_laundromat+0x6f8/0x1058 [nfsd] [ 1626.869813] laundromat_main+0x24/0x60 [nfsd] [ 1626.870231] process_one_work+0x584/0x1050 [ 1626.870595] worker_thread+0x4c4/0xc60 [ 1626.870893] kthread+0x2f8/0x398 [ 1626.871146] ret_from_fork+0x10/0x20 [ 1626.871422] Code: aa1303e1 aa1403e3 910e8000 97bc55d7 (d4210000) [ 1626.871892] SMP: stopping secondary CPUs | ||||
| CVE-2025-40290 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: avoid data corruption on cq descriptor number Since commit 30f241fcf52a ("xsk: Fix immature cq descriptor production"), the descriptor number is stored in skb control block and xsk_cq_submit_addr_locked() relies on it to put the umem addrs onto pool's completion queue. skb control block shouldn't be used for this purpose as after transmit xsk doesn't have control over it and other subsystems could use it. This leads to the following kernel panic due to a NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 1 PID: 927 Comm: p4xsk.bin Not tainted 6.16.12+deb14-cloud-amd64 #1 PREEMPT(lazy) Debian 6.16.12-1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:xsk_destruct_skb+0xd0/0x180 [...] Call Trace: <IRQ> ? napi_complete_done+0x7a/0x1a0 ip_rcv_core+0x1bb/0x340 ip_rcv+0x30/0x1f0 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x87/0x130 __napi_poll+0x28/0x180 net_rx_action+0x339/0x420 handle_softirqs+0xdc/0x320 ? handle_edge_irq+0x90/0x1e0 do_softirq.part.0+0x3b/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x60/0x70 __dev_direct_xmit+0x14e/0x1f0 __xsk_generic_xmit+0x482/0xb70 ? __remove_hrtimer+0x41/0xa0 ? __xsk_generic_xmit+0x51/0xb70 ? _raw_spin_unlock_irqrestore+0xe/0x40 xsk_sendmsg+0xda/0x1c0 __sys_sendto+0x1ee/0x200 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x84/0x2f0 ? __pfx_pollwake+0x10/0x10 ? __rseq_handle_notify_resume+0xad/0x4c0 ? restore_fpregs_from_fpstate+0x3c/0x90 ? switch_fpu_return+0x5b/0xe0 ? do_syscall_64+0x204/0x2f0 ? do_syscall_64+0x204/0x2f0 ? do_syscall_64+0x204/0x2f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [...] Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x1c000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Instead use the skb destructor_arg pointer along with pointer tagging. As pointers are always aligned to 8B, use the bottom bit to indicate whether this a single address or an allocated struct containing several addresses. | ||||
| CVE-2023-54180 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: handle case when repair happens with dev-replace [BUG] There is a bug report that a BUG_ON() in btrfs_repair_io_failure() (originally repair_io_failure() in v6.0 kernel) got triggered when replacing a unreliable disk: BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3 kernel BUG at fs/btrfs/extent_io.c:2380! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2 Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs] Call Trace: <TASK> clean_io_failure+0x14d/0x180 [btrfs] end_bio_extent_readpage+0x412/0x6e0 [btrfs] ? __switch_to+0x106/0x420 process_one_work+0x1c7/0x380 worker_thread+0x4d/0x380 ? rescuer_thread+0x3a0/0x3a0 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 [CAUSE] Before the BUG_ON(), we got some read errors from the replace target first, note the mirror number (3, which is beyond RAID1 duplication, thus it's read from the replace target device). Then at the BUG_ON() location, we are trying to writeback the repaired sectors back the failed device. The check looks like this: ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical, &map_length, &bioc, mirror_num); if (ret) goto out_counter_dec; BUG_ON(mirror_num != bioc->mirror_num); But inside btrfs_map_block(), we can modify bioc->mirror_num especially for dev-replace: if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 && !need_full_stripe(op) && dev_replace->tgtdev != NULL) { ret = get_extra_mirror_from_replace(fs_info, logical, *length, dev_replace->srcdev->devid, &mirror_num, &physical_to_patch_in_first_stripe); patch_the_first_stripe_for_dev_replace = 1; } Thus if we're repairing the replace target device, we're going to trigger that BUG_ON(). But in reality, the read failure from the replace target device may be that, our replace hasn't reached the range we're reading, thus we're reading garbage, but with replace running, the range would be properly filled later. Thus in that case, we don't need to do anything but let the replace routine to handle it. [FIX] Instead of a BUG_ON(), just skip the repair if we're repairing the device replace target device. | ||||
| CVE-2023-54177 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: quota: fix warning in dqgrab() There's issue as follows when do fault injection: WARNING: CPU: 1 PID: 14870 at include/linux/quotaops.h:51 dquot_disable+0x13b7/0x18c0 Modules linked in: CPU: 1 PID: 14870 Comm: fsconfig Not tainted 6.3.0-next-20230505-00006-g5107a9c821af-dirty #541 RIP: 0010:dquot_disable+0x13b7/0x18c0 RSP: 0018:ffffc9000acc79e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88825e41b980 RDX: 0000000000000000 RSI: ffff88825e41b980 RDI: 0000000000000002 RBP: ffff888179f68000 R08: ffffffff82087ca7 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed102f3ed026 R12: ffff888179f68130 R13: ffff888179f68110 R14: dffffc0000000000 R15: ffff888179f68118 FS: 00007f450a073740(0000) GS:ffff88882fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe96f2efd8 CR3: 000000025c8ad000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dquot_load_quota_sb+0xd53/0x1060 dquot_resume+0x172/0x230 ext4_reconfigure+0x1dc6/0x27b0 reconfigure_super+0x515/0xa90 __x64_sys_fsconfig+0xb19/0xd20 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue may happens as follows: ProcessA ProcessB ProcessC sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_suspend -> suspend all type quota sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_resume ret = dquot_load_quota_sb add_dquot_ref do_open -> open file O_RDWR vfs_open do_dentry_open get_write_access atomic_inc_unless_negative(&inode->i_writecount) ext4_file_open dquot_file_open dquot_initialize __dquot_initialize dqget atomic_inc(&dquot->dq_count); __dquot_initialize __dquot_initialize dqget if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) ext4_acquire_dquot -> Return error DQ_ACTIVE_B flag isn't set dquot_disable invalidate_dquots if (atomic_read(&dquot->dq_count)) dqgrab WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) -> Trigger warning In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when dqgrab(). To solve above issue just replace the dqgrab() use in invalidate_dquots() with atomic_inc(&dquot->dq_count). | ||||
| CVE-2023-54142 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gtp: Fix use-after-free in __gtp_encap_destroy(). syzkaller reported use-after-free in __gtp_encap_destroy(). [0] It shows the same process freed sk and touched it illegally. Commit e198987e7dd7 ("gtp: fix suspicious RCU usage") added lock_sock() and release_sock() in __gtp_encap_destroy() to protect sk->sk_user_data, but release_sock() is called after sock_put() releases the last refcnt. [0]: BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:96 [inline] BUG: KASAN: slab-use-after-free in atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline] BUG: KASAN: slab-use-after-free in queued_spin_lock include/asm-generic/qspinlock.h:111 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock include/linux/spinlock.h:186 [inline] BUG: KASAN: slab-use-after-free in __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline] BUG: KASAN: slab-use-after-free in _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178 Write of size 4 at addr ffff88800dbef398 by task syz-executor.2/2401 CPU: 1 PID: 2401 Comm: syz-executor.2 Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x72/0xa0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:351 [inline] print_report+0xcc/0x620 mm/kasan/report.c:462 kasan_report+0xb2/0xe0 mm/kasan/report.c:572 check_region_inline mm/kasan/generic.c:181 [inline] kasan_check_range+0x39/0x1c0 mm/kasan/generic.c:187 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline] queued_spin_lock include/asm-generic/qspinlock.h:111 [inline] do_raw_spin_lock include/linux/spinlock.h:186 [inline] __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline] _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:355 [inline] release_sock+0x1f/0x1a0 net/core/sock.c:3526 gtp_encap_disable_sock drivers/net/gtp.c:651 [inline] gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664 gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728 unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841 rtnl_delete_link net/core/rtnetlink.c:3216 [inline] rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268 rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423 netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x1b7/0x200 net/socket.c:747 ____sys_sendmsg+0x75a/0x990 net/socket.c:2493 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547 __sys_sendmsg+0xfe/0x1d0 net/socket.c:2576 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f1168b1fe5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f1167edccc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f1168b1fe5d RDX: 0000000000000000 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f1168b80530 R15: 0000000000000000 </TASK> Allocated by task 1483: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x ---truncated--- | ||||
| CVE-2023-53747 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF After a call to console_unlock() in vcs_write() the vc_data struct can be freed by vc_port_destruct(). Because of that, the struct vc_data pointer must be reloaded in the while loop in vcs_write() after console_lock() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119 Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:380) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_write (drivers/tty/vt/vc_screen.c:664) vfs_write (fs/read_write.c:582 fs/read_write.c:564) ... <TASK> Allocated by task 1213: kmalloc_trace (mm/slab_common.c:1064) vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680 drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058) con_install (drivers/tty/vt/vt.c:3334) tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415 drivers/tty/tty_io.c:1392) tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:921) vfs_open (fs/open.c:1052) ... Freed by task 4116: kfree (mm/slab_common.c:1016) vc_port_destruct (drivers/tty/vt/vt.c:1044) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2778) ... The buggy address belongs to the object at ffff8880beab8800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00) The buggy address belongs to the physical page: page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbeab8 head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint | ||||
| CVE-2022-50886 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: toshsd: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, free_irq() also needs be called. | ||||
| CVE-2022-50885 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed There is a null-ptr-deref when mount.cifs over rdma: BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe] Read of size 8 at addr 0000000000000018 by task mount.cifs/3046 CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 kasan_report+0xad/0x130 rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe] execute_in_process_context+0x25/0x90 __rxe_cleanup+0x101/0x1d0 [rdma_rxe] rxe_create_qp+0x16a/0x180 [rdma_rxe] create_qp.part.0+0x27d/0x340 ib_create_qp_kernel+0x73/0x160 rdma_create_qp+0x100/0x230 _smbd_get_connection+0x752/0x20f0 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The root cause of the issue is the socket create failed in rxe_qp_init_req(). So move the reset rxe_qp_do_cleanup() after the NULL ptr check. | ||||
| CVE-2022-50882 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix memory leak in uvc_gpio_parse Previously the unit buffer was allocated before checking the IRQ for privacy GPIO. In case of error, the unit buffer was leaked. Allocate the unit buffer after the IRQ to avoid it. Addresses-Coverity-ID: 1474639 ("Resource leak") | ||||
| CVE-2022-50880 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d ---truncated--- | ||||
| CVE-2022-50879 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: objtool: Fix SEGFAULT find_insn() will return NULL in case of failure. Check insn in order to avoid a kernel Oops for NULL pointer dereference. | ||||
| CVE-2022-50878 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init() A NULL check for bridge->encoder shows that it may be NULL, but it already been dereferenced on all paths leading to the check. 812 if (!bridge->encoder) { Dereference the pointer bridge->encoder. 810 drm_connector_attach_encoder(<9611->connector, bridge->encoder); | ||||
| CVE-2022-50877 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: broadcom: bcm4908_enet: update TX stats after actual transmission Queueing packets doesn't guarantee their transmission. Update TX stats after hardware confirms consuming submitted data. This also fixes a possible race and NULL dereference. bcm4908_enet_start_xmit() could try to access skb after freeing it in the bcm4908_enet_poll_tx(). | ||||
ReportizFlow