Filtered by vendor Linux Subscriptions
Filtered by product Linux Kernel Subscriptions
Total 19587 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2025-68205 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver After restructuring and splitting the HDMI codec driver code, each HDMI codec driver contains the own build_controls and build_pcms ops. A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both build_controls and build_pcms are swapped. Unfortunately both callbacks have the very same form, and the compiler didn't complain it, either. This resulted in a NULL dereference because the PCM instance hasn't been initialized at calling the build_controls callback. Fix it by passing the proper entries.
CVE-2025-68207 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Synchronize Dead CT worker with unbind Cancel and wait for any Dead CT worker to complete before continuing with device unbinding. Else the worker will end up using resources freed by the undind operation. (cherry picked from commit 492671339114e376aaa38626d637a2751cdef263)
CVE-2025-68210 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: erofs: avoid infinite loop due to incomplete zstd-compressed data Currently, the decompression logic incorrectly spins if compressed data is truncated in crafted (deliberately corrupted) images.
CVE-2025-68212 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: fs: Fix uninitialized 'offp' in statmount_string() In statmount_string(), most flags assign an output offset pointer (offp) which is later updated with the string offset. However, the STATMOUNT_MNT_UIDMAP and STATMOUNT_MNT_GIDMAP cases directly set the struct fields instead of using offp. This leaves offp uninitialized, leading to a possible uninitialized dereference when *offp is updated. Fix it by assigning offp for UIDMAP and GIDMAP as well, keeping the code path consistent.
CVE-2025-68213 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: idpf: fix possible vport_config NULL pointer deref in remove Attempting to remove the driver will cause a crash in cases where the vport failed to initialize. Following trace is from an instance where the driver failed during an attempt to create a VF: [ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated [ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms) [ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028 ... [ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf] ... [ 1723.364973] Call Trace: [ 1723.365475] <TASK> [ 1723.365972] pci_device_remove+0x42/0xb0 [ 1723.366481] device_release_driver_internal+0x1a9/0x210 [ 1723.366987] pci_stop_bus_device+0x6d/0x90 [ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20 [ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120 [ 1723.368309] sriov_disable+0x34/0xe0 [ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf] [ 1723.368982] sriov_numvfs_store+0xda/0x1c0 Avoid the NULL pointer dereference by adding NULL pointer check for vport_config[i], before freeing user_config.q_coalesce.
CVE-2025-68217 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: Input: pegasus-notetaker - fix potential out-of-bounds access In the pegasus_notetaker driver, the pegasus_probe() function allocates the URB transfer buffer using the wMaxPacketSize value from the endpoint descriptor. An attacker can use a malicious USB descriptor to force the allocation of a very small buffer. Subsequently, if the device sends an interrupt packet with a specific pattern (e.g., where the first byte is 0x80 or 0x42), the pegasus_parse_packet() function parses the packet without checking the allocated buffer size. This leads to an out-of-bounds memory access.
CVE-2025-68218 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix lockdep WARN due to partition scan work Blktests test cases nvme/014, 057 and 058 fail occasionally due to a lockdep WARN. As reported in the Closes tag URL, the WARN indicates that a deadlock can happen due to the dependency among disk->open_mutex, kblockd workqueue completion and partition_scan_work completion. To avoid the lockdep WARN and the potential deadlock, cut the dependency by running the partition_scan_work not by kblockd workqueue but by nvme_wq.
CVE-2025-68216 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Disable trampoline for kernel module function trace The current LoongArch BPF trampoline implementation is incompatible with tracing functions in kernel modules. This causes several severe and user-visible problems: * The `bpf_selftests/module_attach` test fails consistently. * Kernel lockup when a BPF program is attached to a module function [1]. * Critical kernel modules like WireGuard experience traffic disruption when their functions are traced with fentry [2]. Given the severity and the potential for other unknown side-effects, it is safest to disable the feature entirely for now. This patch prevents the BPF subsystem from allowing trampoline attachments to kernel module functions on LoongArch. This is a temporary mitigation until the core issues in the trampoline code for kernel module handling can be identified and fixed. [root@fedora bpf]# ./test_progs -a module_attach -v bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP test_module_attach:FAIL:skel_attach skeleton attach failed: -524 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. [1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/ [2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/
CVE-2025-68219 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: cifs: fix memory leak in smb3_fs_context_parse_param error path Add proper cleanup of ctx->source and fc->source to the cifs_parse_mount_err error handler. This ensures that memory allocated for the source strings is correctly freed on all error paths, matching the cleanup already performed in the success path by smb3_cleanup_fs_context_contents(). Pointers are also set to NULL after freeing to prevent potential double-free issues. This change fixes a memory leak originally detected by syzbot. The leak occurred when processing Opt_source mount options if an error happened after ctx->source and fc->source were successfully allocated but before the function completed. The specific leak sequence was: 1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory 2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory 3. A subsequent error jumps to cifs_parse_mount_err 4. The old error handler freed passwords but not the source strings, causing the memory to leak. This issue was not addressed by commit e8c73eb7db0a ("cifs: client: fix memory leak in smb3_fs_context_parse_param"), which only fixed leaks from repeated fsconfig() calls but not this error path. Patch updated with minor change suggested by kernel test robot
CVE-2025-68222 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its fields are initialized. Notably, num_custom_params is used in pinconf_generic_parse_dt_config(), resulting in intermittent allocation errors, such as the following splat when probing i2c-imx: WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300 [...] Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT) [...] Call trace: __alloc_pages_noprof+0x290/0x300 (P) ___kmalloc_large_node+0x84/0x168 __kmalloc_large_node_noprof+0x34/0x120 __kmalloc_noprof+0x2ac/0x378 pinconf_generic_parse_dt_config+0x68/0x1a0 s32_dt_node_to_map+0x104/0x248 dt_to_map_one_config+0x154/0x1d8 pinctrl_dt_to_map+0x12c/0x280 create_pinctrl+0x6c/0x270 pinctrl_get+0xc0/0x170 devm_pinctrl_get+0x50/0xa0 pinctrl_bind_pins+0x60/0x2a0 really_probe+0x60/0x3a0 [...] __platform_driver_register+0x2c/0x40 i2c_adap_imx_init+0x28/0xff8 [i2c_imx] [...] This results in later parse failures that can cause issues in dependent drivers: s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property [...] pca953x 0-0022: failed writing register: -6 i2c i2c-0: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property i2c i2c-1: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property i2c i2c-2: IMX I2C adapter registered Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of devm_kmalloc() in s32_pinctrl_probe(), which sets the previously uninitialized fields to zero.
CVE-2025-68227 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix proto fallback detection with BPF The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: <TASK> do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]---
CVE-2025-68328 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix bug in saving controller data Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They both are of the same data and overrides each other. This resulted in the rmmod of the svc driver to fail and throw a kernel panic for kthread_stop and fifo free.
CVE-2025-68377 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: ns: initialize ns_list_node for initial namespaces Make sure that the list is always initialized for initial namespaces.
CVE-2025-68375 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: perf/x86: Fix NULL event access and potential PEBS record loss When intel_pmu_drain_pebs_icl() is called to drain PEBS records, the perf_event_overflow() could be called to process the last PEBS record. While perf_event_overflow() could trigger the interrupt throttle and stop all events of the group, like what the below call-chain shows. perf_event_overflow() -> __perf_event_overflow() ->__perf_event_account_interrupt() -> perf_event_throttle_group() -> perf_event_throttle() -> event->pmu->stop() -> x86_pmu_stop() The side effect of stopping the events is that all corresponding event pointers in cpuc->events[] array are cleared to NULL. Assume there are two PEBS events (event a and event b) in a group. When intel_pmu_drain_pebs_icl() calls perf_event_overflow() to process the last PEBS record of PEBS event a, interrupt throttle is triggered and all pointers of event a and event b are cleared to NULL. Then intel_pmu_drain_pebs_icl() tries to process the last PEBS record of event b and encounters NULL pointer access. To avoid this issue, move cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del(). It's safe since cpuc->active_mask or cpuc->pebs_enabled is always checked before access the event pointer from cpuc->events[].
CVE-2025-68755 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: staging: most: remove broken i2c driver The MOST I2C driver has been completely broken for five years without anyone noticing so remove the driver from staging. Specifically, commit 723de0f9171e ("staging: most: remove device from interface structure") started requiring drivers to set the interface device pointer before registration, but the I2C driver was never updated which results in a NULL pointer dereference if anyone ever tries to probe it.
CVE-2025-68774 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix missing hfs_bnode_get() in __hfs_bnode_create When sync() and link() are called concurrently, both threads may enter hfs_bnode_find() without finding the node in the hash table and proceed to create it. Thread A: hfsplus_write_inode() -> hfsplus_write_system_inode() -> hfs_btree_write() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0) Thread B: hfsplus_create_cat() -> hfs_brec_insert() -> hfs_bnode_split() -> hfs_bmap_alloc() -> hfs_bnode_find(tree, 0) -> __hfs_bnode_create(tree, 0) In this case, thread A creates the bnode, sets refcnt=1, and hashes it. Thread B also tries to create the same bnode, notices it has already been inserted, drops its own instance, and uses the hashed one without getting the node. ``` node2 = hfs_bnode_findhash(tree, cnid); if (!node2) { <- Thread A hash = hfs_bnode_hash(cnid); node->next_hash = tree->node_hash[hash]; tree->node_hash[hash] = node; tree->node_hash_cnt++; } else { <- Thread B spin_unlock(&tree->hash_lock); kfree(node); wait_event(node2->lock_wq, !test_bit(HFS_BNODE_NEW, &node2->flags)); return node2; } ``` However, hfs_bnode_find() requires each call to take a reference. Here both threads end up setting refcnt=1. When they later put the node, this triggers: BUG_ON(!atomic_read(&node->refcnt)) In this scenario, Thread B in fact finds the node in the hash table rather than creating a new one, and thus must take a reference. Fix this by calling hfs_bnode_get() when reusing a bnode newly created by another thread to ensure the refcount is updated correctly. A similar bug was fixed in HFS long ago in commit a9dc087fd3c4 ("fix missing hfs_bnode_get() in __hfs_bnode_create") but the same issue remained in HFS+ until now.
CVE-2025-68781 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: usb: phy: fsl-usb: Fix use-after-free in delayed work during device removal The delayed work item otg_event is initialized in fsl_otg_conf() and scheduled under two conditions: 1. When a host controller binds to the OTG controller. 2. When the USB ID pin state changes (cable insertion/removal). A race condition occurs when the device is removed via fsl_otg_remove(): the fsl_otg instance may be freed while the delayed work is still pending or executing. This leads to use-after-free when the work function fsl_otg_event() accesses the already freed memory. The problematic scenario: (detach thread) | (delayed work) fsl_otg_remove() | kfree(fsl_otg_dev) //FREE| fsl_otg_event() | og = container_of(...) //USE | og-> //USE Fix this by calling disable_delayed_work_sync() in fsl_otg_remove() before deallocating the fsl_otg structure. This ensures the delayed work is properly canceled and completes execution prior to memory deallocation. This bug was identified through static analysis.
CVE-2025-68797 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: char: applicom: fix NULL pointer dereference in ac_ioctl Discovered by Atuin - Automated Vulnerability Discovery Engine. In ac_ioctl, the validation of IndexCard and the check for a valid RamIO pointer are skipped when cmd is 6. However, the function unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the end. If cmd is 6, IndexCard may reference a board that does not exist (where RamIO is NULL), leading to a NULL pointer dereference. Fix this by skipping the readb access when cmd is 6, as this command is a global information query and does not target a specific board context.
CVE-2025-68803 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: NFSD: NFSv4 file creation neglects setting ACL An NFSv4 client that sets an ACL with a named principal during file creation retrieves the ACL afterwards, and finds that it is only a default ACL (based on the mode bits) and not the ACL that was requested during file creation. This violates RFC 8881 section 6.4.1.3: "the ACL attribute is set as given". The issue occurs in nfsd_create_setattr(), which calls nfsd_attrs_valid() to determine whether to call nfsd_setattr(). However, nfsd_attrs_valid() checks only for iattr changes and security labels, but not POSIX ACLs. When only an ACL is present, the function returns false, nfsd_setattr() is skipped, and the POSIX ACL is never applied to the inode. Subsequently, when the client retrieves the ACL, the server finds no POSIX ACL on the inode and returns one generated from the file's mode bits rather than returning the originally-specified ACL.
CVE-2025-68804 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_ishtp: Fix UAF after unbinding driver After unbinding the driver, another kthread `cros_ec_console_log_work` is still accessing the device, resulting an UAF and crash. The driver doesn't unregister the EC device in .remove() which should shutdown sub-devices synchronously. Fix it.