ReportizFlow
Filtered by vendor
Subscriptions
Total
348485 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31903 | 2 Igl, Igl-technologies | 2 Eparking.fi, Eparking.fi | 2026-05-06 | 7.5 High |
| The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access. | ||||
| CVE-2026-42440 | 1 Apache | 1 Opennlp | 2026-05-06 | 7.5 High |
| OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader Versions Affected: before 2.5.9 before 3.0.0-M3 Description: The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load. The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins. Mitigation: * 2.x users should upgrade to 2.5.9. * 3.x users should upgrade to 3.0.0-M3. Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. | ||||
| CVE-2026-42226 | 1 N8n | 1 N8n | 2026-05-06 | 7.5 High |
| n8n is an open source workflow automation platform. Prior to versions 1.123.33 and 2.17.5, the dynamic-node-parameters endpoints did not verify whether the authenticated caller was authorized to use a supplied credential reference. An authenticated user with access to a shared workflow could supply a foreign credential ID in the request body, causing the backend to decrypt and use that credential in a helper execution path where the caller also controls the destination URL. This allowed the caller to force the backend to authenticate against attacker-controlled infrastructure using a credential belonging to another user, effectively exfiltrating a reusable API key. The issue is not limited to any single node type; any node that resolves credentials dynamically through these endpoints may be affected. This issue has been patched in versions 1.123.33, 2.17.5, and 2.18.0. | ||||
| CVE-2026-42227 | 1 N8n | 1 N8n | 2026-05-06 | 6.5 Medium |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an authenticated user with a valid API key scoped to variable:list could read variables from projects they are not a member of by supplying an arbitrary projectId query parameter to the public API variables endpoint. The handler queried the variables repository directly without enforcing project membership checks, bypassing the authorization-aware service layer used by the internal enterprise controller. If variables were misused to store sensitive information such as credentials or tokens, they should be rotated immediately. This issue only affects licensed enterprise or team deployments with multiple projects and the variables feature enabled. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. | ||||
| CVE-2025-20204 | 1 Cisco | 1 Identity Services Engine | 2026-05-06 | 4.8 Medium |
| Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit these vulnerabilities by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have valid administrative credentials. | ||||
| CVE-2025-20205 | 1 Cisco | 1 Identity Services Engine | 2026-05-06 | 4.8 Medium |
| Multiple vulnerabilities in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit these vulnerabilities by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have valid administrative credentials. | ||||
| CVE-2026-42228 | 1 N8n | 1 N8n | 2026-05-06 | 6.5 Medium |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the /chat WebSocket endpoint used by the Chat Trigger node's Hosted Chat feature did not verify that an incoming connection was authorized to interact with the target execution. An unauthenticated remote attacker who could identify a valid execution ID for a workflow in a waiting state could attach to that execution, receive the pending prompt intended for the legitimate user, and submit arbitrary input to resume or influence downstream workflow behavior. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. | ||||
| CVE-2026-42233 | 1 N8n | 1 N8n | 2026-05-06 | 9.8 Critical |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, a flaw in the Oracle Database node's select operation allowed user-controlled input passed into the Limit field via expressions to be interpolated directly into the SQL query without sanitization or parameterization. In workflows where external input is passed into the Limit field (e.g., from a webhook), an attacker could inject arbitrary SQL and exfiltrate data from the connected Oracle database. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. | ||||
| CVE-2026-42234 | 1 N8n | 1 N8n | 2026-05-06 | 8.8 High |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an authenticated user with permission to create or modify workflows containing a Python Code Node could escape the sandbox and achieve arbitrary code execution on the task runner container. This issue only affects instances where the Python Task Runner is enabled. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. | ||||
| CVE-2026-42235 | 1 N8n | 1 N8n | 2026-05-06 | 9.6 Critical |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an unauthenticated attacker could register a malicious MCP OAuth client with a crafted client_name. If a victim user authorized the OAuth consent dialog and a second user subsequently revoked that access, a toast notification would render the injected script. Clicking the link would execute arbitrary JavaScript in the victim's authenticated n8n browser session, enabling credential and session token theft, workflow manipulation, or privilege escalation. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. | ||||
| CVE-2026-43869 | 1 Apache | 1 Thrift | 2026-05-06 | 7.3 High |
| Improper Validation of Certificate with Host Mismatch vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue. | ||||
| CVE-2026-43868 | 1 Apache | 1 Thrift | 2026-05-06 | 5.3 Medium |
| Memory Allocation with Excessive Size Value vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue. | ||||
| CVE-2026-43870 | 1 Apache | 1 Thrift | 2026-05-06 | 7.3 High |
| Origin Validation Error, Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal'), Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting'), Uncontrolled Resource Consumption vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue. | ||||
| CVE-2026-20945 | 1 Microsoft | 5 Sharepoint Enterprise Server 2016, Sharepoint Server, Sharepoint Server 2016 and 2 more | 2026-05-06 | 4.6 Medium |
| Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Office SharePoint allows an authorized attacker to perform spoofing over a network. | ||||
| CVE-2025-47401 | 1 Qualcomm | 491 Ar8035, Ar8035 Firmware, Cologne and 488 more | 2026-05-06 | 6.5 Medium |
| Transient DOS when processing target power rate tables during channel configuration. | ||||
| CVE-2025-47403 | 1 Qualcomm | 515 Ar8035, Ar8035 Firmware, Cologne and 512 more | 2026-05-06 | 6.5 Medium |
| Transient DOS when processing a malformed Fast Transition response frame with an invalid header structure during wireless roaming. | ||||
| CVE-2025-47404 | 1 Qualcomm | 377 215 Mobile, 215 Mobile Firmware, 5g Fixed Wireless Access and 374 more | 2026-05-06 | 6.5 Medium |
| Memory corruption when dynamically changing the size of a previously allocated buffer while its contents are being modified. | ||||
| CVE-2025-47405 | 1 Qualcomm | 33 Fastconnect 6900, Fastconnect 6900 Firmware, Fastconnect 7800 and 30 more | 2026-05-06 | 7.8 High |
| Memory corruption when processing camera sensor input/output control codes with invalid output buffers. | ||||
| CVE-2025-47408 | 1 Qualcomm | 41 Fastconnect 6200, Fastconnect 6200 Firmware, Fastconnect 6900 and 38 more | 2026-05-06 | 7.8 High |
| Memory corruption when another driver calls an IOCTL with invalid input/output buffer. | ||||
| CVE-2025-47406 | 1 Qualcomm | 63 Cologne, Cologne Firmware, Fastconnect 6700 and 60 more | 2026-05-06 | 6.1 Medium |
| Information Disclosure while processing IOCTL handler callbacks without verifying buffer size. | ||||