ReportizFlow
Filtered by vendor Netgear
Subscriptions
Total
1239 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2016-1555 | 1 Netgear | 14 Wn604, Wn604 Firmware, Wn802tv2 and 11 more | 2025-04-20 | 9.8 Critical |
| (1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands. | ||||
| CVE-2017-6366 | 1 Netgear | 5 Dgn2200 Firmware, Dgn2200v1, Dgn2200v2 and 2 more | 2025-04-20 | N/A |
| Cross-site request forgery (CSRF) vulnerability in NETGEAR DGN2200 routers with firmware 10.0.0.20 through 10.0.0.50 allows remote attackers to hijack the authentication of users for requests that perform DNS lookups via the host_name parameter to dnslookup.cgi. NOTE: this issue can be combined with CVE-2017-6334 to execute arbitrary code remotely. | ||||
| CVE-2016-1557 | 1 Netgear | 6 Wnap320, Wnap320 Firmware, Wndap350 and 3 more | 2025-04-20 | N/A |
| Netgear WNAP320, WNDAP350, and WNDAP360 before 3.5.5.0 reveal wireless passwords and administrative usernames and passwords over SNMP. | ||||
| CVE-2022-47210 | 1 Netgear | 2 Rax30, Rax30 Firmware | 2025-04-17 | 7.8 High |
| The default console presented to users over telnet (when enabled) is restricted to a subset of commands. Commands issued at this console, however, appear to be fed directly into a system call or other similar function. This allows any authenticated user to execute arbitrary commands on the device. | ||||
| CVE-2022-47209 | 1 Netgear | 2 Rax30, Rax30 Firmware | 2025-04-17 | 8.8 High |
| A support user exists on the device and appears to be a backdoor for Technical Support staff. The default password for this account is “support” and cannot be changed by a user via any normally accessible means. | ||||
| CVE-2022-47208 | 1 Netgear | 12 Nighthawk Ax11000, Nighthawk Ax11000 Firmware, Nighthawk Ax1800 and 9 more | 2025-04-17 | 8.8 High |
| The “puhttpsniff” service, which runs by default, is susceptible to command injection due to improperly sanitized user input. An unauthenticated attacker on the same network segment as the router can execute arbitrary commands on the device without authentication. | ||||
| CVE-2022-46423 | 1 Netgear | 2 Wnr2000, Wnr2000 Firmware | 2025-04-17 | 8.1 High |
| An exploitable firmware modification vulnerability was discovered on the Netgear WNR2000v1 router. An attacker can conduct a MITM (Man-in-the-Middle) attack to modify the user-uploaded firmware image and bypass the CRC check, allowing attackers to execute arbitrary code or cause a Denial of Service (DoS). This affects v1.2.3.7 and earlier. | ||||
| CVE-2022-46422 | 1 Netgear | 2 Wnr2000, Wnr2000 Firmware | 2025-04-17 | 4.8 Medium |
| An issue in Netgear WNR2000 v1 1.2.3.7 and earlier allows authenticated attackers to cause a Denial of Service (DoS) via uploading a crafted firmware image during the firmware update process. | ||||
| CVE-2024-54804 | 1 Netgear | 2 Wnr854t, Wnr854t Firmware | 2025-04-17 | 9.8 Critical |
| Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter wan_hostname and forcing a reboot. This will result in command injection. | ||||
| CVE-2024-54805 | 1 Netgear | 2 Wnr854t, Wnr854t Firmware | 2025-04-17 | 9.8 Critical |
| Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter get_email. After which, they can visit the send_log.cgi endpoint which uses the parameter in a system call to achieve command execution. | ||||
| CVE-2024-54806 | 1 Netgear | 2 Wnr854t, Wnr854t Firmware | 2025-04-17 | 9.8 Critical |
| Netgear WNR854T 1.5.2 (North America) is vulnerable to Arbitrary command execution in cmd.cgi which allows for the execution of system commands via the web interface. | ||||
| CVE-2024-54807 | 1 Netgear | 2 Wnr854t, Wnr854t Firmware | 2025-04-17 | 9.8 Critical |
| In Netgear WNR854T 1.5.2 (North America), the UPNP service is vulnerable to command injection in the function addmap_exec which parses the NewInternalClient parameter of the AddPortMapping SOAPAction into a system call without sanitation. An attacker can send a specially crafted SOAPAction request for AddPortMapping via the router's WANIPConn1 service to achieve arbitrary command execution. | ||||
| CVE-2024-54808 | 1 Netgear | 2 Wnr854t, Wnr854t Firmware | 2025-04-17 | 9.8 Critical |
| Netgear WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the SetDefaultConnectionService function due to an unconstrained use of sscanf. The vulnerability allows for control of the program counter and can be utilized to achieve arbitrary code execution. | ||||
| CVE-2024-54809 | 1 Netgear | 2 Wnr854t, Wnr854t Firmware | 2025-04-17 | 9.8 Critical |
| Netgear Inc WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the parse_st_header function due to use of a request header parameter in a strncpy where size is determined based on the input specified. By sending a specially crafted packet, an attacker can take control of the program counter and hijack control flow of the program to execute arbitrary system commands. | ||||
| CVE-2022-46424 | 1 Netgear | 2 Xwn5001, Xwn5001 Firmware | 2025-04-16 | 8.1 High |
| An exploitable firmware modification vulnerability was discovered on the Netgear XWN5001 Powerline 500 WiFi Access Point. An attacker can conduct a MITM (Man-in-the-Middle) attack to modify the user-uploaded firmware image and bypass the CRC check, allowing attackers to execute arbitrary code or cause a Denial of Service (DoS). This affects v0.4.1.1 and earlier. | ||||
| CVE-2022-4390 | 1 Netgear | 2 Ax2400, Ax2400 Firmware | 2025-04-14 | 10 Critical |
| A network misconfiguration is present in versions prior to 1.0.9.90 of the NETGEAR RAX30 AX2400 series of routers. IPv6 is enabled for the WAN interface by default on these devices. While there are firewall restrictions in place that define access restrictions for IPv4 traffic, these restrictions do not appear to be applied to the WAN interface for IPv6. This allows arbitrary access to any services running on the device that may be inadvertently listening via IPv6, such as the SSH and Telnet servers spawned on ports 22 and 23 by default. This misconfiguration could allow an attacker to interact with services only intended to be accessible by clients on the local network. | ||||
| CVE-2016-5677 | 2 Netgear, Nuuo | 3 Readynas Surveillance, Nvrmini 2, Nvrsolo | 2025-04-12 | N/A |
| NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.0.0 through 3.0.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 have a hardcoded qwe23622260 password for the nuuoeng account, which allows remote attackers to obtain sensitive information via an __nvr_status___.php request. | ||||
| CVE-2016-5674 | 2 Netgear, Nuuo | 3 Readynas Surveillance, Nvrmini 2, Nvrsolo | 2025-04-12 | N/A |
| __debugging_center_utils___.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.7.5 through 3.0.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the log parameter. | ||||
| CVE-2016-1346 | 6 Cisco, Dell, Netgear and 3 more | 6 Telepresence Server Mse 8710, Emc Powerscale Onefs, Jr6150 Firmware and 3 more | 2025-04-12 | N/A |
| The kernel in Cisco TelePresence Server 3.0 through 4.2(4.18) on Mobility Services Engine (MSE) 8710 devices allows remote attackers to cause a denial of service (panic and reboot) via a crafted sequence of IPv6 packets, aka Bug ID CSCuu46673. | ||||
| CVE-2014-4864 | 1 Netgear | 1 Prosafe Firmware | 2025-04-12 | N/A |
| The NETGEAR ProSafe Plus Configuration Utility creates configuration backup files containing cleartext passwords, which might allow remote attackers to obtain sensitive information by reading a file. | ||||