ReportizFlow
Filtered by vendor Cisco
Subscriptions
Filtered by product Nexus 9000
Subscriptions
Total
52 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-20823 | 1 Cisco | 294 Nexus 3016, Nexus 3016 Firmware, Nexus 3016q and 291 more | 2024-11-21 | 8.6 High |
| A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory. | ||||
| CVE-2021-34714 | 1 Cisco | 225 Firepower 4100, Firepower 4110, Firepower 4112 and 222 more | 2024-11-21 | 7.4 High |
| A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process. | ||||
| CVE-2021-1584 | 1 Cisco | 42 Nexus 9000, Nexus 9000v, Nexus 92160yc-x and 39 more | 2024-11-21 | 6 Medium |
| A vulnerability in Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to insufficient restrictions during the execution of a specific CLI command. An attacker with administrative privileges could exploit this vulnerability by performing a command injection attack on the vulnerable command. A successful exploit could allow the attacker to access the underlying operating system as root. | ||||
| CVE-2021-1583 | 1 Cisco | 42 Nexus 9000, Nexus 9000v, Nexus 92160yc-x and 39 more | 2024-11-21 | 4.4 Medium |
| A vulnerability in the fabric infrastructure file system access control of Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to read arbitrary files on an affected system. This vulnerability is due to improper access control. An attacker with Administrator privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to read arbitrary files on the file system of the affected device. | ||||
| CVE-2019-1732 | 1 Cisco | 18 Nexus 3000, Nexus 3100, Nexus 3100-z and 15 more | 2024-11-21 | 6.4 Medium |
| A vulnerability in the Remote Package Manager (RPM) subsystem of Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to leverage a time-of-check, time-of-use (TOCTOU) race condition to corrupt local variables, which could lead to arbitrary command injection. The vulnerability is due to the lack of a proper locking mechanism on critical variables that need to stay static until used. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a set of RPM-related CLI commands. A successful exploit could allow the attacker to perform arbitrary command injection. The attacker would need administrator credentials for the targeted device. | ||||
| CVE-2019-1729 | 1 Cisco | 20 Nexus 3000, Nexus 3100, Nexus 3100-z and 17 more | 2024-11-21 | 6.0 Medium |
| A vulnerability in the CLI implementation of a specific command used for image maintenance for Cisco NX-OS Software could allow an authenticated, local attacker to overwrite any file on the file system including system files. These file overwrites by the attacker are accomplished at the root privilege level. The vulnerability occurs because there is no verification of user-input parameters and or digital-signature verification for image files when using a specific CLI command. An attacker could exploit this vulnerability by authenticating to the device and issuing a command at the CLI. Because an exploit could allow the attacker to overwrite any file on the disk, including system files, a denial of service (DoS) condition could occur. The attacker must have valid administrator credentials for the affected device to exploit this vulnerability. | ||||
| CVE-2019-1728 | 1 Cisco | 40 Firepower 4110, Firepower 4115, Firepower 4120 and 37 more | 2024-11-21 | N/A |
| A vulnerability in the Secure Configuration Validation functionality of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to run arbitrary commands at system boot time with the privileges of root. The vulnerability is due to a lack of proper validation of system files when the persistent configuration information is read from the file system. An attacker could exploit this vulnerability by authenticating to the device and overwriting the persistent configuration storage with malicious executable files. An exploit could allow the attacker to run arbitrary commands at system startup and those commands will run as the root user. The attacker must have valid administrative credentials for the device. | ||||
| CVE-2019-1618 | 1 Cisco | 2 Nexus 9000, Nx-os | 2024-11-21 | 7.8 High |
| A vulnerability in the Tetration Analytics agent for Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to execute arbitrary code as root. The vulnerability is due to an incorrect permissions setting. An attacker could exploit this vulnerability by replacing valid agent files with malicious code. A successful exploit could result in the execution of code supplied by the attacker. Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running versions prior to 7.0(3)I7(5). | ||||
| CVE-2019-1616 | 1 Cisco | 12 Mds 9000, Nexus 3000, Nexus 3500 and 9 more | 2024-11-21 | N/A |
| A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a buffer overflow, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow, resulting in process crashes and a DoS condition on the device. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(25), 8.1(1b), 8.3(1). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5) Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22) and 8.2(3). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). UCS 6200, 6300, and 6400 Fabric Interconnects are affected running software versions prior to 3.2(3j) and 4.0(2a). | ||||
| CVE-2019-1614 | 1 Cisco | 11 Mds 9000, Nexus 2000, Nexus 3000 and 8 more | 2024-11-21 | 8.8 High |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to incorrect input validation of user-supplied data by the NX-API subsystem. An attacker could exploit this vulnerability by sending malicious HTTP or HTTPS packets to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to perform a command-injection attack and execute arbitrary commands with root privileges. Note: NX-API is disabled by default. MDS 9000 Series Multilayer Switches are affected running software versions prior to 8.1(1b) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected running software versions prior to 7.3(4)N1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 7.3(3)D1(1) and 8.2(3). | ||||
| CVE-2019-1605 | 1 Cisco | 13 Mds 9000, Nexus 2000, Nexus 3000 and 10 more | 2024-11-21 | 7.8 High |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary code as root. The vulnerability is due to incorrect input validation in the NX-API feature. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS request to an internal service on an affected device that has the NX-API feature enabled. A successful exploit could allow the attacker to cause a buffer overflow and execute arbitrary code as root. Note: The NX-API feature is disabled by default. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.1(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(8) and 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(8). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.3(2)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 7.3(3)D1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I4(8) and 7.0(3)I7(1). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | ||||
| CVE-2019-1604 | 1 Cisco | 8 Nexus 3000, Nexus 3500, Nexus 3600 and 5 more | 2024-11-21 | 7.8 High |
| A vulnerability in the user account management interface of Cisco NX-OS Software could allow an authenticated, local attacker to gain elevated privileges on an affected device. The vulnerability is due to an incorrect authorization check of user accounts and their associated Group ID (GID). An attacker could exploit this vulnerability by taking advantage of a logic error that will permit the use of higher privileged commands than what is necessarily assigned. A successful exploit could allow an attacker to execute commands with elevated privileges on the underlying Linux shell of an affected device. Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 8.2(3), and 8.3(2). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | ||||
| CVE-2019-1603 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2024-11-21 | 7.8 High |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to escalate lower-level privileges to the administrator level. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. A successful exploit could allow an attacker to make configuration changes to the system as administrator. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | ||||
| CVE-2019-1602 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2024-11-21 | 7.8 High |
| A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to access sensitive data that could be used to elevate their privileges to administrator. The vulnerability is due to improper implementation of filesystem permissions. An attacker could exploit this vulnerability by logging in to the CLI of an affected device, accessing a specific file, and leveraging this information to authenticate to the NX-API server. A successful exploit could allow an attacker to make configuration changes as administrator. Note: NX-API is disabled by default. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | ||||
| CVE-2019-1601 | 1 Cisco | 13 Mds 9000, Nexus 2000, Nexus 3000 and 10 more | 2024-11-21 | 7.8 High |
| A vulnerability in the filesystem permissions of Cisco NX-OS Software could allow an authenticated, local attacker to gain read and write access to a critical configuration file. The vulnerability is due to a failure to impose strict filesystem permissions on the targeted device. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow an attacker to use the content of this configuration file to bypass authentication and log in as any user of the device. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | ||||
| CVE-2019-1600 | 1 Cisco | 16 Firepower 4100, Firepower 9300, Firepower Extensible Operating System and 13 more | 2024-11-21 | 4.4 Medium |
| A vulnerability in the file system permissions of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to access sensitive information that is stored in the file system of an affected system. The vulnerability is due to improper implementation of file system permissions. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow the attacker to access sensitive and critical files. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.2.2.91 and 2.3.1.110. Firepower 9300 Series Next-Generation Firewalls are affected in versions prior to 2.2.2.91 and 2.3.1.110. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | ||||
| CVE-2019-1599 | 1 Cisco | 15 Nexus 1000v, Nexus 3000, Nexus 3500 and 12 more | 2024-11-21 | 8.6 High |
| A vulnerability in the network stack of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to an issue with allocating and freeing memory buffers in the network stack. An attacker could exploit this vulnerability by sending crafted TCP streams to an affected device in a sustained way. A successful exploit could cause the network stack of an affected device to run out of available buffers, impairing operations of control plane and management plane protocols, resulting in a DoS condition. Note: This vulnerability can be triggered only by traffic that is destined to an affected device and cannot be exploited using traffic that transits an affected device. Nexus 1000V Switch for Microsoft Hyper-V is affected in versions prior to 5.2(1)SM3(2.1). Nexus 1000V Switch for VMware vSphere is affected in versions prior to 5.2(1)SV3(4.1a). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(6) and 9.2(2). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(11), 7.0(3)I7(6), and 9.2(2). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5) and 9.2(2). Nexus 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(5)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22. Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5) and 9.2(2). UCS 6200 and 6300 Series Fabric Interconnect are affected in versions prior to 3.2(3j) and 4.0(2a). UCS 6400 Series Fabric Interconnect are affected in versions prior to 4.0(2a). | ||||
| CVE-2019-1598 | 1 Cisco | 12 Firepower 4100, Firepower 9300, Firepower Extensible Operating System and 9 more | 2024-11-21 | N/A |
| Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(20), 7.3(2)D1(1), and 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). UCS 6200 and 6300 Fabric Interconnect are affected in versions prior to 3.2(2b). | ||||
| CVE-2019-1597 | 1 Cisco | 12 Firepower 4100, Firepower 9300, Firepower Extensible Operating System and 9 more | 2024-11-21 | N/A |
| Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54 and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). Cisco UCS 6200 and 6300 Fabric Interconnect devices are affected in versions prior to 3.2(2b). | ||||
| CVE-2019-1596 | 1 Cisco | 6 Nexus 3000, Nexus 3500, Nexus 3600 and 3 more | 2024-11-21 | 7.8 High |
| A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level to root. The attacker must authenticate with valid user credentials. The vulnerability is due to incorrect permissions of a system executable. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level to root. Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5). | ||||