Filtered by vendor Linux Subscriptions
Filtered by product Linux Kernel Subscriptions
Total 18521 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2023-54213 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: USB: sisusbvga: Add endpoint checks The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of the endpoints.
CVE-2023-54214 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix potential user-after-free This fixes all instances of which requires to allocate a buffer calling alloc_skb which may release the chan lock and reacquire later which makes it possible that the chan is disconnected in the meantime.
CVE-2023-54217 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: Revert "drm/msm: Add missing check and destroy for alloc_ordered_workqueue" This reverts commit 643b7d0869cc7f1f7a5ac7ca6bd25d88f54e31d0. A recent patch that tried to fix up the msm_drm_init() paths with respect to the workqueue but only ended up making things worse: First, the newly added calls to msm_drm_uninit() on early errors would trigger NULL-pointer dereferences, for example, as the kms pointer would not have been initialised. (Note that these paths were also modified by a second broken error handling patch which in effect cancelled out this part when merged.) Second, the newly added allocation sanity check would still leak the previously allocated drm device. Instead of trying to salvage what was badly broken (and clearly not tested), let's revert the bad commit so that clean and backportable fixes can be added in its place. Patchwork: https://patchwork.freedesktop.org/patch/525107/
CVE-2023-54218 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs(). KCSAN found a data race in sock_recv_cmsgs() where the read access to sk->sk_stamp needs READ_ONCE(). BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0: sock_write_timestamp include/net/sock.h:2670 [inline] sock_recv_cmsgs include/net/sock.h:2722 [inline] packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1: sock_recv_cmsgs include/net/sock.h:2721 [inline] packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0xffffffffc4653600 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
CVE-2023-54220 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix oops for port->pm on uart_change_pm() Unloading a hardware specific 8250 driver can produce error "Unable to handle kernel paging request at virtual address" about ten seconds after unloading the driver. This happens on uart_hangup() calling uart_change_pm(). Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind") was only a partial fix. If the hardware specific driver has initialized port->pm function, we need to clear port->pm too. Just reinitializing port->ops does not do this. Otherwise serial8250_pm() will call port->pm() instead of serial8250_do_pm().
CVE-2023-54226 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races around sk->sk_shutdown. KCSAN found a data race around sk->sk_shutdown where unix_release_sock() and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll() and unix_dgram_poll() read it locklessly. We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE(). BUG: KCSAN: data-race in unix_poll / unix_release_sock write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1042 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1397 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1: unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170 sock_poll+0xcf/0x2b0 net/socket.c:1385 vfs_poll include/linux/poll.h:88 [inline] ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855 ep_send_events fs/eventpoll.c:1694 [inline] ep_poll fs/eventpoll.c:1823 [inline] do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258 __do_sys_epoll_wait fs/eventpoll.c:2270 [inline] __se_sys_epoll_wait fs/eventpoll.c:2265 [inline] __x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
CVE-2023-54227 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix tags leak when shrink nr_hw_queues Although we don't need to realloc set->tags[] when shrink nr_hw_queues, we need to free them. Or these tags will be leaked. How to reproduce: 1. mount -t configfs configfs /mnt 2. modprobe null_blk nr_devices=0 submit_queues=8 3. mkdir /mnt/nullb/nullb0 4. echo 1 > /mnt/nullb/nullb0/power 5. echo 4 > /mnt/nullb/nullb0/submit_queues 6. rmdir /mnt/nullb/nullb0 In step 4, will alloc 9 tags (8 submit queues and 1 poll queue), then in step 5, new_nr_hw_queues = 5 (4 submit queues and 1 poll queue). At last in step 6, only these 5 tags are freed, the other 4 tags leaked.
CVE-2023-54228 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: regulator: raa215300: Fix resource leak in case of error The clk_register_clkdev() allocates memory by calling vclkdev_alloc() and this memory is not freed in the error path. Similarly, resources allocated by clk_register_fixed_rate() are not freed in the error path. Fix these issues by using devm_clk_hw_register_fixed_rate() and devm_clk_hw_register_clkdev(). After this, the static variable clk is not needed. Replace it with  local variable hw in probe() and drop calling clk_unregister_fixed_rate() from raa215300_rtc_unregister_device().
CVE-2023-54231 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix memory leak in wx_setup_rx_resources When wx_alloc_page_pool() failed in wx_setup_rx_resources(), it doesn't release DMA buffer. Add dma_free_coherent() in the error path to release the DMA buffer.
CVE-2023-54229 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range Because of what seems to be a typo, a 6Ghz-only phy for which the BDF does not allow the 7115Mhz channel will fail to register: WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954 Modules linked in: ath11k_pci sbsa_gwdt CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9 Hardware name: Freebox V7R Board (DT) Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : wiphy_register+0x914/0x954 lr : ieee80211_register_hw+0x67c/0xc10 sp : ffffff800b123aa0 x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418 x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168 x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014 x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718 x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006 x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284 x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: wiphy_register+0x914/0x954 ieee80211_register_hw+0x67c/0xc10 ath11k_mac_register+0x7c4/0xe10 ath11k_core_qmi_firmware_ready+0x1f4/0x570 ath11k_qmi_driver_event_work+0x198/0x590 process_one_work+0x1b8/0x328 worker_thread+0x6c/0x414 kthread+0x100/0x104 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22 ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22 ath11k_pci 0002:01:00.0: failed to create pdev core: -22
CVE-2023-54232 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: m68k: Only force 030 bus error if PC not in exception table __get_kernel_nofault() does copy data in supervisor mode when forcing a task backtrace log through /proc/sysrq_trigger. This is expected cause a bus error exception on e.g. NULL pointer dereferencing when logging a kernel task has no workqueue associated. This bus error ought to be ignored. Our 030 bus error handler is ill equipped to deal with this: Whenever ssw indicates a kernel mode access on a data fault, we don't even attempt to handle the fault and instead always send a SEGV signal (or panic). As a result, the check for exception handling at the fault PC (buried in send_sig_fault() which gets called from do_page_fault() eventually) is never used. In contrast, both 040 and 060 access error handlers do not care whether a fault happened on supervisor mode access, and will call do_page_fault() on those, ultimately honoring the exception table. Add a check in bus_error030 to call do_page_fault() in case we do have an entry for the fault PC in our exception table. I had attempted a fix for this earlier in 2019 that did rely on testing pagefault_disabled() (see link below) to achieve the same thing, but this patch should be more generic. Tested on 030 Atari Falcon.
CVE-2023-54234 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization Commit c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic") introduced an array mrioc->evtack_cmds but initialization of the array elements was missed. They are just zero cleared. The function mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the zero value of the host_tag field, the function calls clear_bit() for mrico->evtack_cmds_bitmap with wrong bit index. This results in memory access to invalid address and "BUG: KASAN: use-after-free". This BUG was observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add the missing initialization of mrioc->evtack_cmds.
CVE-2023-54235 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: PCI/DOE: Fix destroy_work_on_stack() race The following debug object splat was observed in testing: ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510 WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0 ... Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work RIP: 0010:debug_print_object+0x7d/0xb0 ... Call Trace: ? debug_print_object+0x7d/0xb0 ? __pfx_doe_statemachine_work+0x10/0x10 debug_object_free.part.0+0x11b/0x150 doe_statemachine_work+0x45e/0x510 process_one_work+0x1d4/0x3c0 This occurs because destroy_work_on_stack() was called after signaling the completion in the calling thread. This creates a race between destroy_work_on_stack() and the task->work struct going out of scope in pci_doe(). Signal the work complete after destroying the work struct. This is safe because signal_task_complete() is the final thing the work item does and the workqueue code is careful not to access the work struct after.
CVE-2023-54239 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: iommufd: Check for uptr overflow syzkaller found that setting up a map with a user VA that wraps past zero can trigger WARN_ONs, particularly from pin_user_pages weirdly returning 0 due to invalid arguments. Prevent creating a pages with a uptr and size that would math overflow. WARNING: CPU: 0 PID: 518 at drivers/iommu/iommufd/pages.c:793 pfn_reader_user_pin+0x2e6/0x390 Modules linked in: CPU: 0 PID: 518 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:pfn_reader_user_pin+0x2e6/0x390 Code: b1 11 e9 25 fe ff ff e8 28 e4 0f ff 31 ff 48 89 de e8 2e e6 0f ff 48 85 db 74 0a e8 14 e4 0f ff e9 4d ff ff ff e8 0a e4 0f ff <0f> 0b bb f2 ff ff ff e9 3c ff ff ff e8 f9 e3 0f ff ba 01 00 00 00 RSP: 0018:ffffc90000f9fa30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff821e2b72 RDX: 0000000000000000 RSI: ffff888014184680 RDI: 0000000000000002 RBP: ffffc90000f9fa78 R08: 00000000000000ff R09: 0000000079de6f4e R10: ffffc90000f9f790 R11: ffff888014185418 R12: ffffc90000f9fc60 R13: 0000000000000002 R14: ffff888007879800 R15: 0000000000000000 FS: 00007f4227555740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000043 CR3: 000000000e748005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> pfn_reader_next+0x14a/0x7b0 ? interval_tree_double_span_iter_update+0x11a/0x140 pfn_reader_first+0x140/0x1b0 iopt_pages_rw_slow+0x71/0x280 ? __this_cpu_preempt_check+0x20/0x30 iopt_pages_rw_access+0x2b2/0x5b0 iommufd_access_rw+0x19f/0x2f0 iommufd_test+0xd11/0x16f0 ? write_comp_data+0x2f/0x90 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 ? __pfx_iommufd_fops_ioctl+0x10/0x10 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc
CVE-2023-54243 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: fix table blob use-after-free We are not allowed to return an error at this point. Looking at the code it looks like ret is always 0 at this point, but its not. t = find_table_lock(net, repl->name, &ret, &ebt_mutex); ... this can return a valid table, with ret != 0. This bug causes update of table->private with the new blob, but then frees the blob right away in the caller. Syzbot report: BUG: KASAN: vmalloc-out-of-bounds in __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168 Read of size 4 at addr ffffc90005425000 by task kworker/u4:4/74 Workqueue: netns cleanup_net Call Trace: kasan_report+0xbf/0x1f0 mm/kasan/report.c:517 __ebt_unregister_table+0xc00/0xcd0 net/bridge/netfilter/ebtables.c:1168 ebt_unregister_table+0x35/0x40 net/bridge/netfilter/ebtables.c:1372 ops_exit_list+0xb0/0x170 net/core/net_namespace.c:169 cleanup_net+0x4ee/0xb10 net/core/net_namespace.c:613 ... ip(6)tables appears to be ok (ret should be 0 at this point) but make this more obvious.
CVE-2023-54236 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: net/net_failover: fix txq exceeding warning The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does.
CVE-2023-54246 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle() The rcuscale.holdoff module parameter can be used to delay the start of rcu_scale_writer() kthread. However, the hung-task timeout will trigger when the timeout specified by rcuscale.holdoff is greater than hung_task_timeout_secs: runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M" bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300" [ 247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds. [ 247.072529] Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7 [ 247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.074331] task:rcu_scale_write state:D stack:30144 pid:59 ppid:2 flags:0x00004000 [ 247.075346] Call Trace: [ 247.075660] <TASK> [ 247.075965] __schedule+0x635/0x1280 [ 247.076448] ? __pfx___schedule+0x10/0x10 [ 247.076967] ? schedule_timeout+0x2dc/0x4d0 [ 247.077471] ? __pfx_lock_release+0x10/0x10 [ 247.078018] ? enqueue_timer+0xe2/0x220 [ 247.078522] schedule+0x84/0x120 [ 247.078957] schedule_timeout+0x2e1/0x4d0 [ 247.079447] ? __pfx_schedule_timeout+0x10/0x10 [ 247.080032] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.080591] ? __pfx_process_timeout+0x10/0x10 [ 247.081163] ? __pfx_sched_set_fifo_low+0x10/0x10 [ 247.081760] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.082287] rcu_scale_writer+0x6b1/0x7f0 [ 247.082773] ? mark_held_locks+0x29/0xa0 [ 247.083252] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.083865] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.084412] kthread+0x179/0x1c0 [ 247.084759] ? __pfx_kthread+0x10/0x10 [ 247.085098] ret_from_fork+0x2c/0x50 [ 247.085433] </TASK> This commit therefore replaces schedule_timeout_uninterruptible() with schedule_timeout_idle().
CVE-2023-54250 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: ksmbd: avoid out of bounds access in decode_preauth_ctxt() Confirm that the accessed pneg_ctxt->HashAlgorithms address sits within the SMB request boundary; deassemble_neg_contexts() only checks that the eight byte smb2_neg_context header + (client controlled) DataLength are within the packet boundary, which is insufficient. Checking for sizeof(struct smb2_preauth_neg_context) is overkill given that the type currently assumes SMB311_SALT_SIZE bytes of trailing Salt.
CVE-2023-54253 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: btrfs: set page extent mapped after read_folio in relocate_one_page One of the CI runs triggered the following panic assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 PID: 923660 Comm: btrfs Not tainted 6.5.0-rc3+ #1 pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 sp : ffff800093213720 x29: ffff800093213720 x28: ffff8000932138b4 x27: 000000000c280000 x26: 00000001b5d00000 x25: 000000000c281000 x24: 000000000c281fff x23: 0000000000001000 x22: 0000000000000000 x21: ffffff42b95bf880 x20: ffff42b9528e0000 x19: 0000000000001000 x18: ffffffffffffffff x17: 667274622f736620 x16: 6e69202c65746176 x15: 0000000000000028 x14: 0000000000000003 x13: 00000000002672d7 x12: 0000000000000000 x11: ffffcd3f0ccd9204 x10: ffffcd3f0554ae50 x9 : ffffcd3f0379528c x8 : ffff800093213428 x7 : 0000000000000000 x6 : ffffcd3f091771e8 x5 : ffff42b97f333948 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff42b9556cde80 x0 : 000000000000004f Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_set_dirty+0x38/0xa0 btrfs_page_set_dirty+0x58/0x88 relocate_one_page+0x204/0x5f0 relocate_file_extent_cluster+0x11c/0x180 relocate_data_extent+0xd0/0xf8 relocate_block_group+0x3d0/0x4e8 btrfs_relocate_block_group+0x2d8/0x490 btrfs_relocate_chunk+0x54/0x1a8 btrfs_balance+0x7f4/0x1150 btrfs_ioctl+0x10f0/0x20b8 __arm64_sys_ioctl+0x120/0x11d8 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x158 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x194/0x198 Code: 91098021 b0007fa0 91346000 97e9c6d2 (d4210000) This is the same problem outlined in 17b17fcd6d44 ("btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand") , and the fix is the same. I originally looked for the same pattern elsewhere in our code, but mistakenly skipped over this code because I saw the page cache readahead before we set_page_extent_mapped, not realizing that this was only in the !page case, that we can still end up with a !uptodate page and then do the btrfs_read_folio further down. The fix here is the same as the above mentioned patch, move the set_page_extent_mapped call to after the btrfs_read_folio() block to make sure that we have the subpage blocksize stuff setup properly before using the page.
CVE-2023-54255 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: sh: dma: Fix DMA channel offset calculation Various SoCs of the SH3, SH4 and SH4A family, which use this driver, feature a differing number of DMA channels, which can be distributed between up to two DMAC modules. The existing implementation fails to correctly accommodate for all those variations, resulting in wrong channel offset calculations and leading to kernel panics. Rewrite dma_base_addr() in order to properly calculate channel offsets in a DMAC module. Fix dmaor_read_reg() and dmaor_write_reg(), so that the correct DMAC module base is selected for the DMAOR register.