Filtered by vendor Linux Subscriptions
Filtered by product Linux Kernel Subscriptions
Total 18521 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2023-54172 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs with ConfigVersion 9.3 or later support IBT in the guest. However, current versions of Hyper-V have a bug in that there's not an ENDBR64 instruction at the beginning of the hypercall page. Since hypercalls are made with an indirect call to the hypercall page, all hypercall attempts fail with an exception and Linux panics. A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start with ENDBR. The VM will boot and run without IBT. If future Linux 32-bit kernels were to support IBT, additional hypercall page hackery would be needed to make IBT work for such kernels in a Hyper-V VM.
CVE-2023-54173 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in bpf_event_output We received report [1] of kernel crash, which is caused by using nesting protection without disabled preemption. The bpf_event_output can be called by programs executed by bpf_prog_run_array_cg function that disabled migration but keeps preemption enabled. This can cause task to be preempted by another one inside the nesting protection and lead eventually to two tasks using same perf_sample_data buffer and cause crashes like: BUG: kernel NULL pointer dereference, address: 0000000000000001 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page ... ? perf_output_sample+0x12a/0x9a0 ? finish_task_switch.isra.0+0x81/0x280 ? perf_event_output+0x66/0xa0 ? bpf_event_output+0x13a/0x190 ? bpf_event_output_data+0x22/0x40 ? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb ? xa_load+0x87/0xe0 ? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0 ? release_sock+0x3e/0x90 ? sk_setsockopt+0x1a1/0x12f0 ? udp_pre_connect+0x36/0x50 ? inet_dgram_connect+0x93/0xa0 ? __sys_connect+0xb4/0xe0 ? udp_setsockopt+0x27/0x40 ? __pfx_udp_push_pending_frames+0x10/0x10 ? __sys_setsockopt+0xdf/0x1a0 ? __x64_sys_connect+0xf/0x20 ? do_syscall_64+0x3a/0x90 ? entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixing this by disabling preemption in bpf_event_output. [1] https://github.com/cilium/cilium/issues/26756
CVE-2023-54174 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd group->iommufd is not initialized for the iommufd_ctx_put() [20018.331541] BUG: kernel NULL pointer dereference, address: 0000000000000000 [20018.377508] RIP: 0010:iommufd_ctx_put+0x5/0x10 [iommufd] ... [20018.476483] Call Trace: [20018.479214] <TASK> [20018.481555] vfio_group_fops_unl_ioctl+0x506/0x690 [vfio] [20018.487586] __x64_sys_ioctl+0x6a/0xb0 [20018.491773] ? trace_hardirqs_on+0xc5/0xe0 [20018.496347] do_syscall_64+0x67/0x90 [20018.500340] entry_SYSCALL_64_after_hwframe+0x4b/0xb5
CVE-2023-54182 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to check readonly condition correctly With below case, it can mount multi-device image w/ rw option, however one of secondary device is set as ro, later update will cause panic, so let's introduce f2fs_dev_is_readonly(), and check multi-devices rw status in f2fs_remount() w/ it in order to avoid such inconsistent mount status. mkfs.f2fs -c /dev/zram1 /dev/zram0 -f blockdev --setro /dev/zram1 mount -t f2fs dev/zram0 /mnt/f2fs mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only. mount -t f2fs -o remount,rw mnt/f2fs dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=8192 kernel BUG at fs/f2fs/inline.c:258! RIP: 0010:f2fs_write_inline_data+0x23e/0x2d0 [f2fs] Call Trace: f2fs_write_single_data_page+0x26b/0x9f0 [f2fs] f2fs_write_cache_pages+0x389/0xa60 [f2fs] __f2fs_write_data_pages+0x26b/0x2d0 [f2fs] f2fs_write_data_pages+0x2e/0x40 [f2fs] do_writepages+0xd3/0x1b0 __writeback_single_inode+0x5b/0x420 writeback_sb_inodes+0x236/0x5a0 __writeback_inodes_wb+0x56/0xf0 wb_writeback+0x2a3/0x490 wb_do_writeback+0x2b2/0x330 wb_workfn+0x6a/0x260 process_one_work+0x270/0x5e0 worker_thread+0x52/0x3e0 kthread+0xf4/0x120 ret_from_fork+0x29/0x50
CVE-2023-54184 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsit: Free cmds before session free Commands from recovery entries are freed after session has been closed. That leads to use-after-free at command free or NPE with such call trace: Time2Retain timer expired for SID: 1, cleaning up iSCSI session. BUG: kernel NULL pointer dereference, address: 0000000000000140 RIP: 0010:sbitmap_queue_clear+0x3a/0xa0 Call Trace: target_release_cmd_kref+0xd1/0x1f0 [target_core_mod] transport_generic_free_cmd+0xd1/0x180 [target_core_mod] iscsit_free_cmd+0x53/0xd0 [iscsi_target_mod] iscsit_free_connection_recovery_entries+0x29d/0x320 [iscsi_target_mod] iscsit_close_session+0x13a/0x140 [iscsi_target_mod] iscsit_check_post_dataout+0x440/0x440 [iscsi_target_mod] call_timer_fn+0x24/0x140 Move cleanup of recovery enrties to before session freeing.
CVE-2023-54185 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: btrfs: remove BUG_ON()'s in add_new_free_space() At add_new_free_space() we have these BUG_ON()'s that are there to deal with any failure to add free space to the in memory free space cache. Such failures are mostly -ENOMEM that should be very rare. However there's no need to have these BUG_ON()'s, we can just return any error to the caller and all callers and their upper call chain are already dealing with errors. So just make add_new_free_space() return any errors, while removing the BUG_ON()'s, and returning the total amount of added free space to an optional u64 pointer argument.
CVE-2023-54194 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree The call stack shown below is a scenario in the Linux 4.19 kernel. Allocating memory failed where exfat fs use kmalloc_array due to system memory fragmentation, while the u-disk was inserted without recognition. Devices such as u-disk using the exfat file system are pluggable and may be insert into the system at any time. However, long-term running systems cannot guarantee the continuity of physical memory. Therefore, it's necessary to address this issue. Binder:2632_6: page allocation failure: order:4, mode:0x6040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null) Call trace: [242178.097582] dump_backtrace+0x0/0x4 [242178.097589] dump_stack+0xf4/0x134 [242178.097598] warn_alloc+0xd8/0x144 [242178.097603] __alloc_pages_nodemask+0x1364/0x1384 [242178.097608] kmalloc_order+0x2c/0x510 [242178.097612] kmalloc_order_trace+0x40/0x16c [242178.097618] __kmalloc+0x360/0x408 [242178.097624] load_alloc_bitmap+0x160/0x284 [242178.097628] exfat_fill_super+0xa3c/0xe7c [242178.097635] mount_bdev+0x2e8/0x3a0 [242178.097638] exfat_fs_mount+0x40/0x50 [242178.097643] mount_fs+0x138/0x2e8 [242178.097649] vfs_kern_mount+0x90/0x270 [242178.097655] do_mount+0x798/0x173c [242178.097659] ksys_mount+0x114/0x1ac [242178.097665] __arm64_sys_mount+0x24/0x34 [242178.097671] el0_svc_common+0xb8/0x1b8 [242178.097676] el0_svc_handler+0x74/0x90 [242178.097681] el0_svc+0x8/0x340 By analyzing the exfat code,we found that continuous physical memory is not required here,so kvmalloc_array is used can solve this problem.
CVE-2023-54195 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix timeout of a call that hasn't yet been granted a channel afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may get stalled in the background waiting for a connection to become available); it then calls rxrpc_kernel_set_max_life() to set the timeouts - but that starts the call timer so the call timer might then expire before we get a connection assigned - leading to the following oops if the call stalled: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701 RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157 ... Call Trace: <TASK> rxrpc_send_ACK+0x50/0x13b rxrpc_input_call_event+0x16a/0x67d rxrpc_io_thread+0x1b6/0x45f ? _raw_spin_unlock_irqrestore+0x1f/0x35 ? rxrpc_input_packet+0x519/0x519 kthread+0xe7/0xef ? kthread_complete_and_exit+0x1b/0x1b ret_from_fork+0x22/0x30 Fix this by noting the timeouts in struct rxrpc_call when the call is created. The timer will be started when the first packet is transmitted. It shouldn't be possible to trigger this directly from userspace through AF_RXRPC as sendmsg() will return EBUSY if the call is in the waiting-for-conn state if it dropped out of the wait due to a signal.
CVE-2023-54197 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work" This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f. This patch introduces a possible null-ptr-def problem. Revert it. And the fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition").
CVE-2023-54198 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: tty: fix out-of-bounds access in tty_driver_lookup_tty() When specifying an invalid console= device like console=tty3270, tty_driver_lookup_tty() returns the tty struct without checking whether index is a valid number. To reproduce: qemu-system-x86_64 -enable-kvm -nographic -serial mon:stdio \ -kernel ../linux-build-x86/arch/x86/boot/bzImage \ -append "console=ttyS0 console=tty3270" This crashes with: [ 0.770599] BUG: kernel NULL pointer dereference, address: 00000000000000ef [ 0.771265] #PF: supervisor read access in kernel mode [ 0.771773] #PF: error_code(0x0000) - not-present page [ 0.772609] Oops: 0000 [#1] PREEMPT SMP PTI [ 0.774878] RIP: 0010:tty_open+0x268/0x6f0 [ 0.784013] chrdev_open+0xbd/0x230 [ 0.784444] ? cdev_device_add+0x80/0x80 [ 0.784920] do_dentry_open+0x1e0/0x410 [ 0.785389] path_openat+0xca9/0x1050 [ 0.785813] do_filp_open+0xaa/0x150 [ 0.786240] file_open_name+0x133/0x1b0 [ 0.786746] filp_open+0x27/0x50 [ 0.787244] console_on_rootfs+0x14/0x4d [ 0.787800] kernel_init_freeable+0x1e4/0x20d [ 0.788383] ? rest_init+0xc0/0xc0 [ 0.788881] kernel_init+0x11/0x120 [ 0.789356] ret_from_fork+0x22/0x30
CVE-2023-54199 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() Fix the below kernel panic due to null pointer access: [ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 18.513464] Mem abort info: [ 18.516346] ESR = 0x0000000096000005 [ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits [ 18.525706] SET = 0, FnV = 0 [ 18.528878] EA = 0, S1PTW = 0 [ 18.532117] FSC = 0x05: level 1 translation fault [ 18.537138] Data abort info: [ 18.540110] ISV = 0, ISS = 0x00000005 [ 18.544060] CM = 0, WnR = 0 [ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000 [ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP **Snip** [ 18.696758] Call trace: [ 18.699278] adreno_gpu_cleanup+0x30/0x88 [ 18.703396] a6xx_destroy+0xc0/0x130 [ 18.707066] a6xx_gpu_init+0x308/0x424 [ 18.710921] adreno_bind+0x178/0x288 [ 18.714590] component_bind_all+0xe0/0x214 [ 18.718797] msm_drm_bind+0x1d4/0x614 [ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8 [ 18.728105] __component_add+0xa0/0x158 [ 18.732048] component_add+0x20/0x2c [ 18.735719] adreno_probe+0x40/0xc0 [ 18.739300] platform_probe+0xb4/0xd4 [ 18.743068] really_probe+0xfc/0x284 [ 18.746738] __driver_probe_device+0xc0/0xec [ 18.751129] driver_probe_device+0x48/0x110 [ 18.755421] __device_attach_driver+0xa8/0xd0 [ 18.759900] bus_for_each_drv+0x90/0xdc [ 18.763843] __device_attach+0xfc/0x174 [ 18.767786] device_initial_probe+0x20/0x2c [ 18.772090] bus_probe_device+0x40/0xa0 [ 18.776032] deferred_probe_work_func+0x94/0xd0 [ 18.780686] process_one_work+0x190/0x3d0 [ 18.784805] worker_thread+0x280/0x3d4 [ 18.788659] kthread+0x104/0x1c0 [ 18.791981] ret_from_fork+0x10/0x20 [ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516) [ 18.801913] ---[ end trace 0000000000000000 ]--- [ 18.809039] Kernel panic - not syncing: Oops: Fatal exception Patchwork: https://patchwork.freedesktop.org/patch/515605/
CVE-2023-54200 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: always release netdev hooks from notifier This reverts "netfilter: nf_tables: skip netdev events generated on netns removal". The problem is that when a veth device is released, the veth release callback will also queue the peer netns device for removal. Its possible that the peer netns is also slated for removal. In this case, the device memory is already released before the pre_exit hook of the peer netns runs: BUG: KASAN: slab-use-after-free in nf_hook_entry_head+0x1b8/0x1d0 Read of size 8 at addr ffff88812c0124f0 by task kworker/u8:1/45 Workqueue: netns cleanup_net Call Trace: nf_hook_entry_head+0x1b8/0x1d0 __nf_unregister_net_hook+0x76/0x510 nft_netdev_unregister_hooks+0xa0/0x220 __nft_release_hook+0x184/0x490 nf_tables_pre_exit_net+0x12f/0x1b0 .. Order is: 1. First netns is released, veth_dellink() queues peer netns device for removal 2. peer netns is queued for removal 3. peer netns device is released, unreg event is triggered 4. unreg event is ignored because netns is going down 5. pre_exit hook calls nft_netdev_unregister_hooks but device memory might be free'd already.
CVE-2023-54201 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix wrong resources deallocation order When trying to destroy QP or CQ, we first decrease the refcount and potentially free memory regions allocated for the object and then request the device to destroy the object. If the device fails, the object isn't fully destroyed so the user/IB core can try to destroy the object again which will lead to underflow when trying to decrease an already zeroed refcount. Deallocate resources in reverse order of allocating them to safely free them.
CVE-2023-54202 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix race condition UAF in i915_perf_add_config_ioctl Userspace can guess the id value and try to race oa_config object creation with config remove, resulting in a use-after-free if we dereference the object after unlocking the metrics_lock. For that reason, unlocking the metrics_lock must be done after we are done dereferencing the object. [tursulin: Manually added stable tag.] (cherry picked from commit 49f6f6483b652108bcb73accd0204a464b922395)
CVE-2023-54203 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr When smb1 mount fails, KASAN detect slab-out-of-bounds in init_smb2_rsp_hdr like the following one. For smb1 negotiate(56bytes) , init_smb2_rsp_hdr() for smb2 is called. The issue occurs while handling smb1 negotiate as smb2 server operations. Add smb server operations for smb1 (get_cmd_val, init_rsp_hdr, allocate_rsp_buf, check_user_session) to handle smb1 negotiate so that smb2 server operation does not handle it. [ 411.400423] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers [ 411.400452] CIFS: Attempting to mount \\192.168.45.139\homes [ 411.479312] ksmbd: init_smb2_rsp_hdr : 492 [ 411.479323] ================================================================== [ 411.479327] BUG: KASAN: slab-out-of-bounds in init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479369] Read of size 16 at addr ffff888488ed0734 by task kworker/14:1/199 [ 411.479379] CPU: 14 PID: 199 Comm: kworker/14:1 Tainted: G OE 6.1.21 #3 [ 411.479386] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3801 08/23/2019 [ 411.479390] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 411.479425] Call Trace: [ 411.479428] <TASK> [ 411.479432] dump_stack_lvl+0x49/0x63 [ 411.479444] print_report+0x171/0x4a8 [ 411.479452] ? kasan_complete_mode_report_info+0x3c/0x200 [ 411.479463] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479497] kasan_report+0xb4/0x130 [ 411.479503] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479537] kasan_check_range+0x149/0x1e0 [ 411.479543] memcpy+0x24/0x70 [ 411.479550] init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479585] handle_ksmbd_work+0x109/0x760 [ksmbd] [ 411.479616] ? _raw_spin_unlock_irqrestore+0x50/0x50 [ 411.479624] ? smb3_encrypt_resp+0x340/0x340 [ksmbd] [ 411.479656] process_one_work+0x49c/0x790 [ 411.479667] worker_thread+0x2b1/0x6e0 [ 411.479674] ? process_one_work+0x790/0x790 [ 411.479680] kthread+0x177/0x1b0 [ 411.479686] ? kthread_complete_and_exit+0x30/0x30 [ 411.479692] ret_from_fork+0x22/0x30 [ 411.479702] </TASK>
CVE-2023-54205 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak.
CVE-2023-54209 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: block: fix blktrace debugfs entries leakage Commit 99d055b4fd4b ("block: remove per-disk debugfs files in blk_unregister_queue") moves blk_trace_shutdown() from blk_release_queue() to blk_unregister_queue(), this is safe if blktrace is created through sysfs, however, there is a regression in corner case. blktrace can still be enabled after del_gendisk() through ioctl if the disk is opened before del_gendisk(), and if blktrace is not shutdown through ioctl before closing the disk, debugfs entries will be leaked. Fix this problem by shutdown blktrace in disk_release(), this is safe because blk_trace_remove() is reentrant.
CVE-2023-54208 1 Linux 1 Linux Kernel 2026-04-15 N/A
In the Linux kernel, the following vulnerability has been resolved: media: ov5675: Fix memleak in ov5675_init_controls() There is a kmemleak when testing the media/i2c/ov5675.c with bpf mock device: AssertionError: unreferenced object 0xffff888107362160 (size 16): comm "python3", pid 277, jiffies 4294832798 (age 20.722s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000abe7d67c>] __kmalloc_node+0x44/0x1b0 [<000000008a725aac>] kvmalloc_node+0x34/0x180 [<000000009a53cd11>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev] [<0000000055b46db0>] ov5675_probe+0x38b/0x897 [ov5675] [<00000000153d886c>] i2c_device_probe+0x28d/0x680 [<000000004afb7e8f>] really_probe+0x17c/0x3f0 [<00000000ff2f18e4>] __driver_probe_device+0xe3/0x170 [<000000000a001029>] driver_probe_device+0x49/0x120 [<00000000e39743c7>] __device_attach_driver+0xf7/0x150 [<00000000d32fd070>] bus_for_each_drv+0x114/0x180 [<000000009083ac41>] __device_attach+0x1e5/0x2d0 [<0000000015b4a830>] bus_probe_device+0x126/0x140 [<000000007813deaf>] device_add+0x810/0x1130 [<000000007becb867>] i2c_new_client_device+0x386/0x540 [<000000007f9cf4b4>] of_i2c_register_device+0xf1/0x110 [<00000000ebfdd032>] of_i2c_notify+0xfc/0x1f0 ov5675_init_controls() won't clean all the allocated resources in fail path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to prevent memleak.
CVE-2023-54210 1 Linux 1 Linux Kernel 2026-04-15 7.0 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor() KASAN reports that there's a use-after-free in hci_remove_adv_monitor(). Trawling through the disassembly, you can see that the complaint is from the access in bt_dev_dbg() under the HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because msft_remove_monitor() can end up freeing the monitor structure. Specifically: hci_remove_adv_monitor() -> msft_remove_monitor() -> msft_remove_monitor_sync() -> msft_le_cancel_monitor_advertisement_cb() -> hci_free_adv_monitor() Let's fix the problem by just stashing the relevant data when it's still valid.
CVE-2023-54211 1 Linux 1 Linux Kernel 2026-04-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix warning in trace_buffered_event_disable() Warning happened in trace_buffered_event_disable() at WARN_ON_ONCE(!trace_buffered_event_ref) Call Trace: ? __warn+0xa5/0x1b0 ? trace_buffered_event_disable+0x189/0x1b0 __ftrace_event_enable_disable+0x19e/0x3e0 free_probe_data+0x3b/0xa0 unregister_ftrace_function_probe_func+0x6b8/0x800 event_enable_func+0x2f0/0x3d0 ftrace_process_regex.isra.0+0x12d/0x1b0 ftrace_filter_write+0xe6/0x140 vfs_write+0x1c9/0x6f0 [...] The cause of the warning is in __ftrace_event_enable_disable(), trace_buffered_event_enable() was called once while trace_buffered_event_disable() was called twice. Reproduction script show as below, for analysis, see the comments: ``` #!/bin/bash cd /sys/kernel/tracing/ # 1. Register a 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was set; # 2) trace_buffered_event_enable() was called first time; echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter # 2. Enable the event registered, then: # 1) SOFT_DISABLED_BIT was cleared; # 2) trace_buffered_event_disable() was called first time; echo 1 > events/initcall/initcall_finish/enable # 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was # set again!!! cat /proc/cmdline # 4. Unregister the 'disable_event' command, then: # 1) SOFT_DISABLED_BIT was cleared again; # 2) trace_buffered_event_disable() was called second time!!! echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \ set_ftrace_filter ``` To fix it, IIUC, we can change to call trace_buffered_event_enable() at fist time soft-mode enabled, and call trace_buffered_event_disable() at last time soft-mode disabled.