ReportizFlow
Filtered by vendor Linux
Subscriptions
Total
17525 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54055 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix memory leak of PBLE objects On rmmod of irdma, the PBLE object memory is not being freed. PBLE object memory are not statically pre-allocated at function initialization time unlike other HMC objects. PBLEs objects and the Segment Descriptors (SD) for it can be dynamically allocated during scale up and SD's remain allocated till function deinitialization. Fix this leak by adding IRDMA_HMC_IW_PBLE to the iw_hmc_obj_types[] table and skip pbles in irdma_create_hmc_obj but not in irdma_del_hmc_objects(). | ||||
| CVE-2022-50750 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/panel/panel-sitronix-st7701: Remove panel on DSI attach failure In case mipi_dsi_attach() fails, call drm_panel_remove() to avoid memory leak. | ||||
| CVE-2023-54101 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: driver: soc: xilinx: use _safe loop iterator to avoid a use after free The hash_for_each_possible() loop dereferences "eve_data" to get the next item on the list. However the loop frees eve_data so it leads to a use after free. Use hash_for_each_possible_safe() instead. | ||||
| CVE-2022-50723 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix memory leak in bnxt_nvm_test() Free the kzalloc'ed buffer before returning in the success path. | ||||
| CVE-2023-54104 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op() 'op-cs' is copied in 'fun->mchip_number' which is used to access the 'mchip_offsets' and the 'rnb_gpio' arrays. These arrays have NAND_MAX_CHIPS elements, so the index must be below this limit. Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This would lead to out-of-bound accesses. | ||||
| CVE-2023-54043 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Do not add the same hwpt to the ioas->hwpt_list twice The hwpt is added to the hwpt_list only during its creation, it is never added again. This hunk is some missed leftover from rework. Adding it twice will corrupt the linked list in some cases. It effects HWPT specific attachment, which is something the test suite cannot cover until we can create a legitimate struct device with a non-system iommu "driver" (ie we need the bus removed from the iommu code) | ||||
| CVE-2023-54057 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow, because the string specifier in the format string sscanf() has no width limitation. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2023-54085 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix NULL pointer dereference on fastopen early fallback In case of early fallback to TCP, subflow_syn_recv_sock() deletes the subflow context before returning the newly allocated sock to the caller. The fastopen path does not cope with the above unconditionally dereferencing the subflow context. | ||||
| CVE-2023-54096 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: fix enumeration completion The soundwire subsystem uses two completion structures that allow drivers to wait for soundwire device to become enumerated on the bus and initialised by their drivers, respectively. The code implementing the signalling is currently broken as it does not signal all current and future waiters and also uses the wrong reinitialisation function, which can potentially lead to memory corruption if there are still waiters on the queue. Not signalling future waiters specifically breaks sound card probe deferrals as codec drivers can not tell that the soundwire device is already attached when being reprobed. Some codec runtime PM implementations suffer from similar problems as waiting for enumeration during resume can also timeout despite the device already having been enumerated. | ||||
| CVE-2023-54108 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests The following message and call trace was seen with debug kernels: DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as single] WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017 check_unmap+0xf42/0x1990 Call Trace: debug_dma_unmap_page+0xc9/0x100 qla_nvme_ls_unmap+0x141/0x210 [qla2xxx] Remove DMA mapping from the driver altogether, as it is already done by FC layer. This prevents the warning. | ||||
| CVE-2022-50759 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov5648: Free V4L2 fwnode data on unbind The V4L2 fwnode data structure doesn't get freed on unbind, which leads to a memleak. | ||||
| CVE-2023-54100 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix use after free bug in qedi_remove() In qedi_probe() we call __qedi_probe() which initializes &qedi->recovery_work with qedi_recovery_handler() and &qedi->board_disable_work with qedi_board_disable_work(). When qedi_schedule_recovery_handler() is called, schedule_delayed_work() will finally start the work. In qedi_remove(), which is called to remove the driver, the following sequence may be observed: Fix this by finishing the work before cleanup in qedi_remove(). CPU0 CPU1 |qedi_recovery_handler qedi_remove | __qedi_remove | iscsi_host_free | scsi_host_put | //free shost | |iscsi_host_for_each_session |//use qedi->shost Cancel recovery_work and board_disable_work in __qedi_remove(). | ||||
| CVE-2023-54126 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: safexcel - Cleanup ring IRQ workqueues on load failure A failure loading the safexcel driver results in the following warning on boot, because the IRQ affinity has not been correctly cleaned up. Ensure we clean up the affinity and workqueues on a failure to load the driver. crypto-safexcel: probe of f2800000.crypto failed with error -2 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340 Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4 CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 #3 Hardware name: MikroTik RB5009 (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : free_irq+0x300/0x340 lr : free_irq+0x2e0/0x340 sp : ffff800008fa3890 x29: ffff800008fa3890 x28: 0000000000000000 x27: 0000000000000000 x26: ffff8000008e6dc0 x25: ffff000009034cac x24: ffff000009034d50 x23: 0000000000000000 x22: 000000000000004a x21: ffff0000093e0d80 x20: ffff000009034c00 x19: ffff00000615fc00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 000075f5c1584c5e x14: 0000000000000017 x13: 0000000000000000 x12: 0000000000000040 x11: ffff000000579b60 x10: ffff000000579b62 x9 : ffff800008bbe370 x8 : ffff000000579dd0 x7 : 0000000000000000 x6 : ffff000000579e18 x5 : ffff000000579da8 x4 : ffff800008ca0000 x3 : ffff800008ca0188 x2 : 0000000013033204 x1 : ffff000009034c00 x0 : ffff8000087eadf0 Call trace: free_irq+0x300/0x340 devm_irq_release+0x14/0x20 devres_release_all+0xa0/0x100 device_unbind_cleanup+0x14/0x60 really_probe+0x198/0x2d4 __driver_probe_device+0x74/0xdc driver_probe_device+0x3c/0x110 __driver_attach+0x8c/0x190 bus_for_each_dev+0x6c/0xc0 driver_attach+0x20/0x30 bus_add_driver+0x148/0x1fc driver_register+0x74/0x120 __platform_driver_register+0x24/0x30 safexcel_init+0x48/0x1000 [crypto_safexcel] do_one_initcall+0x4c/0x1b0 do_init_module+0x44/0x1cc load_module+0x1724/0x1be4 __do_sys_finit_module+0xbc/0x110 __arm64_sys_finit_module+0x1c/0x24 invoke_syscall+0x44/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x20/0x80 el0_svc+0x14/0x4c el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x148/0x14c ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2022-50763 | 1 Linux | 1 Linux Kernel | 2025-12-29 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: marvell/octeontx - prevent integer overflows The "code_length" value comes from the firmware file. If your firmware is untrusted realistically there is probably very little you can do to protect yourself. Still we try to limit the damage as much as possible. Also Smatch marks any data read from the filesystem as untrusted and prints warnings if it not capped correctly. The "code_length * 2" can overflow. The round_up(ucode_size, 16) + sizeof() expression can overflow too. Prevent these overflows. | ||||
| CVE-2022-50769 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mxcmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(). | ||||
| CVE-2022-50766 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: set generation before calling btrfs_clean_tree_block in btrfs_init_new_buffer syzbot is reporting uninit-value in btrfs_clean_tree_block() [1], for commit bc877d285ca3dba2 ("btrfs: Deduplicate extent_buffer init code") missed that btrfs_set_header_generation() in btrfs_init_new_buffer() must not be moved to after clean_tree_block() because clean_tree_block() is calling btrfs_header_generation() since commit 55c69072d6bd5be1 ("Btrfs: Fix extent_buffer usage when nodesize != leafsize"). Since memzero_extent_buffer() will reset "struct btrfs_header" part, we can't move btrfs_set_header_generation() to before memzero_extent_buffer(). Just re-add btrfs_set_header_generation() before btrfs_clean_tree_block(). | ||||
| CVE-2023-54050 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memleak when insert_old_idx() failed Following process will cause a memleak for copied up znode: dirty_cow_znode zn = copy_znode(c, znode); err = insert_old_idx(c, zbr->lnum, zbr->offs); if (unlikely(err)) return ERR_PTR(err); // No one refers to zn. Fetch a reproducer in [Link]. Function copy_znode() is split into 2 parts: resource allocation and znode replacement, insert_old_idx() is split in similar way, so resource cleanup could be done in error handling path without corrupting metadata(mem & disk). It's okay that old index inserting is put behind of add_idx_dirt(), old index is used in layout_leb_in_gaps(), so the two processes do not depend on each other. | ||||
| CVE-2023-54110 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: rndis_host: Secure rndis_query check against int overflow Variables off and len typed as uint32 in rndis_query function are controlled by incoming RNDIS response message thus their value may be manipulated. Setting off to a unexpectetly large value will cause the sum with len and 8 to overflow and pass the implemented validation step. Consequently the response pointer will be referring to a location past the expected buffer boundaries allowing information leakage e.g. via RNDIS_OID_802_3_PERMANENT_ADDRESS OID. | ||||
| CVE-2023-54116 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-generic: prohibit potential out-of-bounds access The fbdev test of IGT may write after EOF, which lead to out-of-bound access for drm drivers with fbdev-generic. For example, run fbdev test on a x86+ast2400 platform, with 1680x1050 resolution, will cause the linux kernel hang with the following call trace: Oops: 0000 [#1] PREEMPT SMP PTI [IGT] fbdev: starting subtest eof Workqueue: events drm_fb_helper_damage_work [drm_kms_helper] [IGT] fbdev: starting subtest nullptr RIP: 0010:memcpy_erms+0xa/0x20 RSP: 0018:ffffa17d40167d98 EFLAGS: 00010246 RAX: ffffa17d4eb7fa80 RBX: ffffa17d40e0aa80 RCX: 00000000000014c0 RDX: 0000000000001a40 RSI: ffffa17d40e0b000 RDI: ffffa17d4eb80000 RBP: ffffa17d40167e20 R08: 0000000000000000 R09: ffff89522ecff8c0 R10: ffffa17d4e4c5000 R11: 0000000000000000 R12: ffffa17d4eb7fa80 R13: 0000000000001a40 R14: 000000000000041a R15: ffffa17d40167e30 FS: 0000000000000000(0000) GS:ffff895257380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa17d40e0b000 CR3: 00000001eaeca006 CR4: 00000000001706e0 Call Trace: <TASK> ? drm_fbdev_generic_helper_fb_dirty+0x207/0x330 [drm_kms_helper] drm_fb_helper_damage_work+0x8f/0x170 [drm_kms_helper] process_one_work+0x21f/0x430 worker_thread+0x4e/0x3c0 ? __pfx_worker_thread+0x10/0x10 kthread+0xf4/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> CR2: ffffa17d40e0b000 ---[ end trace 0000000000000000 ]--- The is because damage rectangles computed by drm_fb_helper_memory_range_to_clip() function is not guaranteed to be bound in the screen's active display area. Possible reasons are: 1) Buffers are allocated in the granularity of page size, for mmap system call support. The shadow screen buffer consumed by fbdev emulation may also choosed be page size aligned. 2) The DIV_ROUND_UP() used in drm_fb_helper_memory_range_to_clip() will introduce off-by-one error. For example, on a 16KB page size system, in order to store a 1920x1080 XRGB framebuffer, we need allocate 507 pages. Unfortunately, the size 1920*1080*4 can not be divided exactly by 16KB. 1920 * 1080 * 4 = 8294400 bytes 506 * 16 * 1024 = 8290304 bytes 507 * 16 * 1024 = 8306688 bytes line_length = 1920*4 = 7680 bytes 507 * 16 * 1024 / 7680 = 1081.6 off / line_length = 507 * 16 * 1024 / 7680 = 1081 DIV_ROUND_UP(507 * 16 * 1024, 7680) will yeild 1082 memcpy_toio() typically issue the copy line by line, when copy the last line, out-of-bound access will be happen. Because: 1082 * line_length = 1082 * 7680 = 8309760, and 8309760 > 8306688 Note that userspace may still write to the invisiable area if a larger buffer than width x stride is exposed. But it is not a big issue as long as there still have memory resolve the access if not drafting so far. - Also limit the y1 (Daniel) - keep fix patch it to minimal (Daniel) - screen_size is page size aligned because of it need mmap (Thomas) - Adding fixes tag (Thomas) | ||||
| CVE-2023-54052 | 1 Linux | 1 Linux Kernel | 2025-12-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU txs may be dropped if the frame is aggregated in AMSDU. When the problem shows up, some SKBs would be hold in driver to cause network stopped temporarily. Even if the problem can be recovered by txs timeout handling, mt7921 still need to disable txs in AMSDU to avoid this issue. | ||||