ReportizFlow
Filtered by vendor
Subscriptions
Total
39 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43012 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix switchdev mode rollback in case of failure If for some internal reason switchdev mode fails, we rollback to legacy mode, before this patch, rollback will unregister the uplink netdev and leave it unregistered causing the below kernel bug. To fix this, we need to avoid netdev unregister by setting the proper rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode. devlink (431) used greatest stack depth: 11048 bytes left mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), \ necvfs(0), active vports(0) mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload mlx5_core 0000:00:03.0: Loading uplink representor for vport 65535 mlx5_core 0000:00:03.0: mlx5_cmd_out_err:816:(pid 456): \ QUERY_HCA_CAP(0x100) op_mod(0x0) failed, \ status bad parameter(0x3), syndrome (0x3a3846), err(-22) mlx5_core 0000:00:03.0 enp0s3np0 (unregistered): Unloading uplink \ representor for vport 65535 ------------[ cut here ]------------ kernel BUG at net/core/dev.c:12070! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 456 Comm: devlink Not tainted 6.16.0-rc3+ \ #9 PREEMPT(voluntary) RIP: 0010:unregister_netdevice_many_notify+0x123/0xae0 ... Call Trace: [ 90.923094] unregister_netdevice_queue+0xad/0xf0 [ 90.923323] unregister_netdev+0x1c/0x40 [ 90.923522] mlx5e_vport_rep_unload+0x61/0xc6 [ 90.923736] esw_offloads_enable+0x8e6/0x920 [ 90.923947] mlx5_eswitch_enable_locked+0x349/0x430 [ 90.924182] ? is_mp_supported+0x57/0xb0 [ 90.924376] mlx5_devlink_eswitch_mode_set+0x167/0x350 [ 90.924628] devlink_nl_eswitch_set_doit+0x6f/0xf0 [ 90.924862] genl_family_rcv_msg_doit+0xe8/0x140 [ 90.925088] genl_rcv_msg+0x18b/0x290 [ 90.925269] ? __pfx_devlink_nl_pre_doit+0x10/0x10 [ 90.925506] ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10 [ 90.925766] ? __pfx_devlink_nl_post_doit+0x10/0x10 [ 90.926001] ? __pfx_genl_rcv_msg+0x10/0x10 [ 90.926206] netlink_rcv_skb+0x52/0x100 [ 90.926393] genl_rcv+0x28/0x40 [ 90.926557] netlink_unicast+0x27d/0x3d0 [ 90.926749] netlink_sendmsg+0x1f7/0x430 [ 90.926942] __sys_sendto+0x213/0x220 [ 90.927127] ? __sys_recvmsg+0x6a/0xd0 [ 90.927312] __x64_sys_sendto+0x24/0x30 [ 90.927504] do_syscall_64+0x50/0x1c0 [ 90.927687] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 90.927929] RIP: 0033:0x7f7d0363e047 | ||||
| CVE-2026-43009 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix incorrect pruning due to atomic fetch precision tracking When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as a destination, thus receiving the old value from the memory location. The current backtracking logic does not account for this. It treats atomic fetch operations the same as regular stores where the src register is only an input. This leads the backtrack_insn to fail to propagate precision to the stack location, which is then not marked as precise! Later, the verifier's path pruning can incorrectly consider two states equivalent when they differ in terms of stack state. Meaning, two branches can be treated as equivalent and thus get pruned when they should not be seen as such. Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to also cover atomic fetch operations via is_atomic_fetch_insn() helper. When the fetch dst register is being tracked for precision, clear it, and propagate precision over to the stack slot. For non-stack memory, the precision walk stops at the atomic instruction, same as regular BPF_LDX. This covers all fetch variants. Before: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exit After: 0: (b7) r1 = 8 ; R1=8 1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8 2: (b7) r2 = 0 ; R2=0 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm 4: (bf) r3 = r10 ; R3=fp0 R10=fp0 5: (0f) r3 += r2 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0 mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1 mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8 6: R2=8 R3=fp8 6: (b7) r0 = 0 ; R0=0 7: (95) exit | ||||
| CVE-2026-31445 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid use of half-online-committed context One major usage of damon_call() is online DAMON parameters update. It is done by calling damon_commit_ctx() inside the damon_call() callback function. damon_commit_ctx() can fail for two reasons: 1) invalid parameters and 2) internal memory allocation failures. In case of failures, the damon_ctx that attempted to be updated (commit destination) can be partially updated (or, corrupted from a perspective), and therefore shouldn't be used anymore. The function only ensures the damon_ctx object can safely deallocated using damon_destroy_ctx(). The API callers are, however, calling damon_commit_ctx() only after asserting the parameters are valid, to avoid damon_commit_ctx() fails due to invalid input parameters. But it can still theoretically fail if the internal memory allocation fails. In the case, DAMON may run with the partially updated damon_ctx. This can result in unexpected behaviors including even NULL pointer dereference in case of damos_commit_dests() failure [1]. Such allocation failure is arguably too small to fail, so the real world impact would be rare. But, given the bad consequence, this needs to be fixed. Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving the damon_commit_ctx() failure on the damon_ctx object. For this, introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it when it is failed. kdamond_call() checks if the field is set after each damon_call_control->fn() is executed. If it is set, ignore remaining callback requests and return. All kdamond_call() callers including kdamond_fn() also check the maybe_corrupted field right after kdamond_call() invocations. If the field is set, break the kdamond_fn() main loop so that DAMON sill doesn't use the context that might be corrupted. [[email protected]: let kdamond_call() with cancel regardless of maybe_corrupted] | ||||
| CVE-2026-31734 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU Since commit 8e4f0b1ebcf2 ("bpf: use rcu_read_lock_dont_migrate() for trampoline.c"), the BPF prolog (__bpf_prog_enter) calls migrate_disable() only when CONFIG_PREEMPT_RCU is enabled, via rcu_read_lock_dont_migrate(). Without CONFIG_PREEMPT_RCU, the prolog never touches migration_disabled, so migration_disabled == 1 always means the task is truly migration-disabled regardless of whether it is the current task. The old unconditional p == current check was a false negative in this case, potentially allowing a migration-disabled task to be dispatched to a remote CPU and triggering scx_error in task_can_run_on_remote_rq(). Only apply the p == current disambiguation when CONFIG_PREEMPT_RCU is enabled, where the ambiguity with the BPF prolog still exists. | ||||
| CVE-2026-43273 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: supply snapshot context in ceph_zero_partial_object() The ceph_zero_partial_object function was missing proper snapshot context for its OSD write operations, which could lead to data inconsistencies in snapshots. Reproducer: ../src/vstart.sh --new -x --localhost --bluestore ./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a' mount -t ceph [email protected]=/ /mnt/mycephfs/ -o conf=./ceph.conf dd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1 mkdir /mnt/mycephfs/.snap/snap1 md5sum /mnt/mycephfs/.snap/snap1/foo fallocate -p -o 0 -l 4096 /mnt/mycephfs/foo echo 3 > /proc/sys/vm/drop/caches md5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!! | ||||
| CVE-2026-43226 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: No shortcut out of RDS_CONN_ERROR RDS connections carry a state "rds_conn_path::cp_state" and transitions from one state to another and are conditional upon an expected state: "rds_conn_path_transition." There is one exception to this conditionality, which is "RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop" regardless of what state the condition is currently in. But as soon as a connection enters state "RDS_CONN_ERROR", the connection handling code expects it to go through the shutdown-path. The RDS/TCP multipath changes added a shortcut out of "RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING" via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change"). A subsequent "rds_tcp_reset_callbacks" can then transition the state to "RDS_CONN_RESETTING" with a shutdown-worker queued. That'll trip up "rds_conn_init_shutdown", which was never adjusted to handle "RDS_CONN_RESETTING" and subsequently drops the connection with the dreaded "DR_INV_CONN_STATE", which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever. So we do two things here: a) Don't shortcut "RDS_CONN_ERROR", but take the longer path through the shutdown code. b) Add "RDS_CONN_RESETTING" to the expected states in "rds_conn_init_shutdown" so that we won't error out and get stuck, if we ever hit weird state transitions like this again." | ||||
| CVE-2026-43133 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB. | ||||
| CVE-2026-43145 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Fix invalid loaded resource table detection imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded resource table even when the current firmware does not provide one. When the device tree contains a "rsc-table" entry, priv->rsc_table is non-NULL and denotes where a resource table would be located if one is present in memory. However, when the current firmware has no resource table, rproc->table_ptr is NULL. The function still returns priv->rsc_table, and the remoteproc core interprets this as a valid loaded resource table. Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when there is no resource table for the current firmware (i.e. when rproc->table_ptr is NULL). This aligns the function's semantics with the remoteproc core: a loaded resource table is only reported when a valid table_ptr exists. With this change, starting firmware without a resource table no longer triggers a crash. | ||||
| CVE-2026-31676 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: only handle RESPONSE during service challenge Only process RESPONSE packets while the service connection is still in RXRPC_CONN_SERVICE_CHALLENGING. Check that state under state_lock before running response verification and security initialization, then use a local secured flag to decide whether to queue the secured-connection work after the state transition. This keeps duplicate or late RESPONSE packets from re-running the setup path and removes the unlocked post-transition state test. | ||||
| CVE-2026-43219 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been registered yet If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly. | ||||
| CVE-2026-43030 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug. | ||||
| CVE-2026-31773 | 1 Linux | 1 Linux Kernel | 2026-05-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: derive legacy responder STK authentication from MITM state The legacy responder path in smp_random() currently labels the stored STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH. That reflects what the local service requested, not what the pairing flow actually achieved. For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear and the resulting STK should remain unauthenticated even if the local side requested HIGH security. Use the established MITM state when storing the responder STK so the key metadata matches the pairing result. This also keeps the legacy path aligned with the Secure Connections code, which already treats JUST_WORKS/JUST_CFM as unauthenticated. | ||||
| CVE-2026-31754 | 1 Linux | 1 Linux Kernel | 2026-05-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cleanup because state is still INACTIVE. This violates the DRD controller design specification (Figure22), which requires returning to idle state before switching roles. This leads to a synchronous external abort in xhci_gen_setup() when setting up the host controller: [ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19 [ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget [ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed ... [ 1301.375722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1301.377716] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP [ 1301.382485] pc : xhci_gen_setup+0xa4/0x408 [ 1301.393391] backtrace: ... xhci_gen_setup+0xa4/0x408 <-- CRASH xhci_plat_setup+0x44/0x58 usb_add_hcd+0x284/0x678 ... cdns_role_set+0x9c/0xbc <-- Role switch Fix by calling cdns_drd_gadget_off() in the error path to properly clean up the DRD gadget state. | ||||
| CVE-2026-31600 | 1 Linux | 1 Linux Kernel | 2026-04-29 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mm: Handle invalid large leaf mappings correctly It has been possible for a long time to mark ptes in the linear map as invalid. This is done for secretmem, kfence, realm dma memory un/share, and others, by simply clearing the PTE_VALID bit. But until commit a166563e7ec37 ("arm64: mm: support large block mapping when rodata=full") large leaf mappings were never made invalid in this way. It turns out various parts of the code base are not equipped to handle invalid large leaf mappings (in the way they are currently encoded) and I've observed a kernel panic while booting a realm guest on a BBML2_NOABORT system as a result: [ 15.432706] software IO TLB: Memory encryption is active and system is using DMA bounce buffers [ 15.476896] Unable to handle kernel paging request at virtual address ffff000019600000 [ 15.513762] Mem abort info: [ 15.527245] ESR = 0x0000000096000046 [ 15.548553] EC = 0x25: DABT (current EL), IL = 32 bits [ 15.572146] SET = 0, FnV = 0 [ 15.592141] EA = 0, S1PTW = 0 [ 15.612694] FSC = 0x06: level 2 translation fault [ 15.640644] Data abort info: [ 15.661983] ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000 [ 15.694875] CM = 0, WnR = 1, TnD = 0, TagAccess = 0 [ 15.723740] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 15.755776] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081f3f000 [ 15.800410] [ffff000019600000] pgd=0000000000000000, p4d=180000009ffff403, pud=180000009fffe403, pmd=00e8000199600704 [ 15.855046] Internal error: Oops: 0000000096000046 [#1] SMP [ 15.886394] Modules linked in: [ 15.900029] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc4-dirty #4 PREEMPT [ 15.935258] Hardware name: linux,dummy-virt (DT) [ 15.955612] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 15.986009] pc : __pi_memcpy_generic+0x128/0x22c [ 16.006163] lr : swiotlb_bounce+0xf4/0x158 [ 16.024145] sp : ffff80008000b8f0 [ 16.038896] x29: ffff80008000b8f0 x28: 0000000000000000 x27: 0000000000000000 [ 16.069953] x26: ffffb3976d261ba8 x25: 0000000000000000 x24: ffff000019600000 [ 16.100876] x23: 0000000000000001 x22: ffff0000043430d0 x21: 0000000000007ff0 [ 16.131946] x20: 0000000084570010 x19: 0000000000000000 x18: ffff00001ffe3fcc [ 16.163073] x17: 0000000000000000 x16: 00000000003fffff x15: 646e612065766974 [ 16.194131] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 16.225059] x11: 0000000000000000 x10: 0000000000000010 x9 : 0000000000000018 [ 16.256113] x8 : 0000000000000018 x7 : 0000000000000000 x6 : 0000000000000000 [ 16.287203] x5 : ffff000019607ff0 x4 : ffff000004578000 x3 : ffff000019600000 [ 16.318145] x2 : 0000000000007ff0 x1 : ffff000004570010 x0 : ffff000019600000 [ 16.349071] Call trace: [ 16.360143] __pi_memcpy_generic+0x128/0x22c (P) [ 16.380310] swiotlb_tbl_map_single+0x154/0x2b4 [ 16.400282] swiotlb_map+0x5c/0x228 [ 16.415984] dma_map_phys+0x244/0x2b8 [ 16.432199] dma_map_page_attrs+0x44/0x58 [ 16.449782] virtqueue_map_page_attrs+0x38/0x44 [ 16.469596] virtqueue_map_single_attrs+0xc0/0x130 [ 16.490509] virtnet_rq_alloc.isra.0+0xa4/0x1fc [ 16.510355] try_fill_recv+0x2a4/0x584 [ 16.526989] virtnet_open+0xd4/0x238 [ 16.542775] __dev_open+0x110/0x24c [ 16.558280] __dev_change_flags+0x194/0x20c [ 16.576879] netif_change_flags+0x24/0x6c [ 16.594489] dev_change_flags+0x48/0x7c [ 16.611462] ip_auto_config+0x258/0x1114 [ 16.628727] do_one_initcall+0x80/0x1c8 [ 16.645590] kernel_init_freeable+0x208/0x2f0 [ 16.664917] kernel_init+0x24/0x1e0 [ 16.680295] ret_from_fork+0x10/0x20 [ 16.696369] Code: 927cec03 cb0e0021 8b0e0042 a9411c26 (a900340c) [ 16.723106] ---[ end trace 0000000000000000 ]--- [ 16.752866] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 16.792556] Kernel Offset: 0x3396ea200000 from 0xffff8000800000 ---truncated--- | ||||
| CVE-2026-41388 | 1 Openclaw | 1 Openclaw | 2026-04-29 | 6.5 Medium |
| OpenClaw before 2026.3.31 contains a configuration management vulnerability where startup migration treats empty-array settings as missing values. Attackers can restart the application to rehydrate revoked Tlon configuration from file state, bypassing intended revocation controls. | ||||
| CVE-2026-31545 | 1 Linux | 1 Linux Kernel | 2026-04-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFC: nxp-nci: allow GPIOs to sleep Allow the firmware and enable GPIOs to sleep. This fixes a `WARN_ON' and allows the driver to operate GPIOs which are connected to I2C GPIO expanders. -- >8 -- kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98 -- >8 -- | ||||
| CVE-2026-31534 | 2026-04-25 | 7.0 High | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-41340 | 1 Openclaw | 1 Openclaw | 2026-04-24 | 6.5 Medium |
| OpenClaw before 2026.3.31 contains an authentication boundary vulnerability where Telegram legacy allowFrom migration incorrectly fans default-account trust into all named accounts. Attackers can exploit this trust propagation to bypass authentication controls and gain unauthorized access to named accounts. | ||||
| CVE-2026-23371 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting Running stress-ng --schedpolicy 0 on an RT kernel on a big machine might lead to the following WARNINGs (edited). sched: DL de-boosted task PID 22725: REPLENISH flag missing WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8 ... (running_bw underflow) Call trace: dequeue_task_dl+0x15c/0x1f8 (P) dequeue_task+0x80/0x168 deactivate_task+0x24/0x50 push_dl_task+0x264/0x2e0 dl_task_timer+0x1b0/0x228 __hrtimer_run_queues+0x188/0x378 hrtimer_interrupt+0xfc/0x260 ... The problem is that when a SCHED_DEADLINE task (lock holder) is changed to a lower priority class via sched_setscheduler(), it may fail to properly inherit the parameters of potential DEADLINE donors if it didn't already inherit them in the past (shorter deadline than donor's at that time). This might lead to bandwidth accounting corruption, as enqueue_task_dl() won't recognize the lock holder as boosted. The scenario occurs when: 1. A DEADLINE task (donor) blocks on a PI mutex held by another DEADLINE task (holder), but the holder doesn't inherit parameters (e.g., it already has a shorter deadline) 2. sched_setscheduler() changes the holder from DEADLINE to a lower class while still holding the mutex 3. The holder should now inherit DEADLINE parameters from the donor and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen Fix the issue by introducing __setscheduler_dl_pi(), which detects when a DEADLINE (proper or boosted) task gets setscheduled to a lower priority class. In case, the function makes the task inherit DEADLINE parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to ensure proper bandwidth accounting during the next enqueue operation. | ||||
| CVE-2026-23409 | 1 Linux | 1 Linux Kernel | 2026-04-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix differential encoding verification Differential encoding allows loops to be created if it is abused. To prevent this the unpack should verify that a diff-encode chain terminates. Unfortunately the differential encode verification had two bugs. 1. it conflated states that had gone through check and already been marked, with states that were currently being checked and marked. This means that loops in the current chain being verified are treated as a chain that has already been verified. 2. the order bailout on already checked states compared current chain check iterators j,k instead of using the outer loop iterator i. Meaning a step backwards in states in the current chain verification was being mistaken for moving to an already verified state. Move to a double mark scheme where already verified states get a different mark, than the current chain being kept. This enables us to also drop the backwards verification check that was the cause of the second error as any already verified state is already marked. | ||||