ReportizFlow
Filtered by vendor
Subscriptions
Total
217 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-57295 | 1 H3c | 3 Magic Nx15, Magic Nx15 Firmware, Nx15v100r015 | 2025-10-03 | 8 High |
| H3C devices running firmware version NX15V100R015 are vulnerable to unauthorized access due to insecure default credentials. The root user account has no password set, and the H3C user account uses the default password "admin," both stored in the /etc/shadow file. Attackers with network access can exploit these credentials to gain unauthorized root-level access to the device via the administrative interface or other network services, potentially leading to privilege escalation, information disclosure, or arbitrary code execution. | ||||
| CVE-2025-36222 | 1 Ibm | 3 Storage Fusion, Storage Fusion Hci, Storage Fusion Hci For Watsonx | 2025-10-02 | 8.7 High |
| IBM Fusion 2.2.0 through 2.10.1, IBM Fusion HCI 2.2.0 through 2.10.0, and IBM Fusion HCI for watsonx 2.8.2 through 2.10.0 uses insecure default configurations that could expose AMQStreams without client authentication that could allow an attacker to perform unauthorized actions. | ||||
| CVE-2025-41245 | 1 Vmware | 3 Aria Operations, Cloud Foundation, Tools | 2025-09-30 | 4.9 Medium |
| VMware Aria Operations contains an information disclosure vulnerability. A malicious actor with non-administrative privileges in Aria Operations may exploit this vulnerability to disclose credentials of other users of Aria Operations. | ||||
| CVE-2024-50390 | 1 Qnap | 1 Qurouter | 2025-09-24 | 9.8 Critical |
| A command injection vulnerability has been reported to affect QHora. If exploited, the vulnerability could allow remote attackers to execute arbitrary commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.5.032 and later | ||||
| CVE-2025-41713 | 1 Wago | 1 Cc100 | 2025-09-17 | 6.5 Medium |
| During a short time frame while the device is booting an unauthenticated remote attacker can send traffic to unauthorized networks due to the switch operating in an undefined state until a CPU-induced reset allows proper configuration. | ||||
| CVE-2025-43797 | 1 Liferay | 2 Dxp, Portal | 2025-09-17 | N/A |
| In Liferay Portal 7.1.0 through 7.4.3.111, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions, the default membership type of a newly created site is “Open” which allows any registered users to become a member of the site. A remote attacker with site membership can potentially view, add or edit content on the site. | ||||
| CVE-2025-59044 | 1 Himmelblau-idm | 1 Himmelblau | 2025-09-11 | 4.4 Medium |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Himmelblau 0.9.x derives numeric GIDs for Entra ID groups from the group display name when himmelblau.conf `id_attr_map = name` (the default configuration). Because Microsoft Entra ID allows multiple groups with the same `displayName` (including end-user–created personal/O365 groups, depending on tenant policy), distinct directory groups can collapse to the same numeric GID on Linux. This issue only applies to Himmelblau versions 0.9.0 through 0.9.22. Any resource or service on a Himmelblau-joined host that enforces authorization by numeric GID (files/dirs, etc.) can be unintentionally accessible to a user who creates or joins a different Entra/O365 group that happens to share the same `displayName` as a privileged security group. Users should upgrade to 0.9.23, or 1.0.0 or later, to receive a patch. Group to GID mapping now uses Entra ID object IDs (GUIDs) and does not collide on same-name groups. As a workaround, use tenant policy hardening to restrict arbitrary group creation until all hosts are patched. | ||||
| CVE-2025-32330 | 1 Google | 1 Android | 2025-09-08 | 5.7 Medium |
| In generateRandomPassword of LocalBluetoothLeBroadcast.java, there is a possible way to intercept the Auracast audio stream due to an insecure default value. This could lead to remote (proximal/adjacent) information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2023-48733 | 3 Canonical, Debian, Tianocore | 3 Lxd, Debian Linux, Edk2 | 2025-08-26 | 6.7 Medium |
| An insecure default to allow UEFI Shell in EDK2 was left enabled in Ubuntu's EDK2. This allows an OS-resident attacker to bypass Secure Boot. | ||||
| CVE-2025-7353 | 1 Rockwellautomation | 1 Controllogix | 2025-08-17 | N/A |
| A security issue exists due to the web-based debugger agent enabled on Rockwell Automation ControlLogix® Ethernet Modules. If a specific IP address is used to connect to the WDB agent, it can allow remote attackers to perform memory dumps, modify memory, and control execution flow. | ||||
| CVE-2017-12736 | 1 Siemens | 15 Ruggedcom, Ruggedcom Ros, Ruggedcom Rsl910 and 12 more | 2025-08-12 | 8.8 High |
| After initial configuration, the Ruggedcom Discovery Protocol (RCDP) is still able to write to the device under certain conditions. This could allow an attacker located in the adjacent network of the targeted device to perform unauthorized administrative actions. | ||||
| CVE-2025-44647 | 1 Trendnet | 2 Tew-wlc100p, Tew-wlc100p Firmware | 2025-08-07 | 7.3 High |
| In TRENDnet TEW-WLC100P 2.03b03, the i_dont_care_about_security_and_use_aggressive_mode_psk option is enabled in the strongSwan configuration file, so that IKE Responders are allowed to use IKEv1 Aggressive Mode with Pre-Shared Keys to conduct offline attacks on the openly transmitted hash of the PSK. | ||||
| CVE-2025-27443 | 1 Zoom | 4 Meeting Software Development Kit, Rooms, Rooms Controller and 1 more | 2025-08-01 | 2.8 Low |
| Insecure default variable initialization in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a loss of integrity via local access. | ||||
| CVE-2025-54127 | 2 Haxtheweb, Psu | 2 Haxcms-nodejs, Haxcms-nodejs | 2025-07-30 | 9.8 Critical |
| HAXcms with nodejs backend allows users to start the server in any HAXsite or HAXcms instance. In versions 11.0.6 and below, the NodeJS version of HAXcms uses an insecure default configuration designed for local development. The default configuration does not perform authorization or authentication checks. If a user were to deploy haxcms-nodejs without modifying the default settings, ‘HAXCMS_DISABLE_JWT_CHECKS‘ would be set to ‘true‘ and their deployment would lack session authentication. This is fixed in version 11.0.7. | ||||
| CVE-2020-13927 | 1 Apache | 1 Airflow | 2025-07-30 | 9.8 Critical |
| The previous default setting for Airflow's Experimental API was to allow all API requests without authentication, but this poses security risks to users who miss this fact. From Airflow 1.10.11 the default has been changed to deny all requests by default and is documented at https://airflow.apache.org/docs/1.10.11/security.html#api-authentication. Note this change fixes it for new installs but existing users need to change their config to default `[api]auth_backend = airflow.api.auth.backend.deny_all` as mentioned in the Updating Guide: https://github.com/apache/airflow/blob/1.10.11/UPDATING.md#experimental-api-will-deny-all-request-by-default | ||||
| CVE-2022-24706 | 1 Apache | 1 Couchdb | 2025-07-30 | 9.8 Critical |
| In Apache CouchDB prior to 3.2.2, an attacker can access an improperly secured default installation without authenticating and gain admin privileges. The CouchDB documentation has always made recommendations for properly securing an installation, including recommending using a firewall in front of all CouchDB installations. | ||||
| CVE-2023-27524 | 1 Apache | 1 Superset | 2025-07-30 | 8.9 High |
| Session Validation attacks in Apache Superset versions up to and including 2.0.1. Installations that have not altered the default configured SECRET_KEY according to installation instructions allow for an attacker to authenticate and access unauthorized resources. This does not affect Superset administrators who have changed the default value for SECRET_KEY config. All superset installations should always set a unique secure random SECRET_KEY. Your SECRET_KEY is used to securely sign all session cookies and encrypting sensitive information on the database. Add a strong SECRET_KEY to your `superset_config.py` file like: SECRET_KEY = <YOUR_OWN_RANDOM_GENERATED_SECRET_KEY> Alternatively you can set it with `SUPERSET_SECRET_KEY` environment variable. | ||||
| CVE-2023-6448 | 1 Unitronics | 33 Samba 3.5, Samba 3.5 Firmware, Samba 4.3 and 30 more | 2025-07-30 | 9.8 Critical |
| Unitronics VisiLogic before version 9.9.00, used in Vision and Samba PLCs and HMIs, uses a default administrative password. An unauthenticated attacker with network access can take administrative control of a vulnerable system. | ||||
| CVE-2025-48927 | 1 Smarsh | 1 Telemessage | 2025-07-30 | 5.3 Medium |
| The TeleMessage service through 2025-05-05 configures Spring Boot Actuator with an exposed heap dump endpoint at a /heapdump URI, as exploited in the wild in May 2025. | ||||
| CVE-2025-25271 | 1 Phoenixcontact | 8 Charx Sec-3000, Charx Sec-3000 Firmware, Charx Sec-3050 and 5 more | 2025-07-22 | 8.8 High |
| An unauthenticated adjacent attacker is able to configure a new OCPP backend, due to insecure defaults for the configuration interface. | ||||