ReportizFlow
Filtered by vendor Linux
Subscriptions
Total
14384 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-37925 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jfs: reject on-disk inodes of an unsupported type Syzbot has reported the following BUG: kernel BUG at fs/inode.c:668! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 UID: 0 PID: 139 Comm: jfsCommit Not tainted 6.12.0-rc4-syzkaller-00085-g4e46774408d9 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 RIP: 0010:clear_inode+0x168/0x190 Code: 4c 89 f7 e8 ba fe e5 ff e9 61 ff ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 7c c1 4c 89 f7 e8 90 ff e5 ff eb b7 0b e8 01 5d 7f ff 90 0f 0b e8 f9 5c 7f ff 90 0f 0b e8 f1 5c 7f RSP: 0018:ffffc900027dfae8 EFLAGS: 00010093 RAX: ffffffff82157a87 RBX: 0000000000000001 RCX: ffff888104d4b980 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffffc900027dfc90 R08: ffffffff82157977 R09: fffff520004fbf38 R10: dffffc0000000000 R11: fffff520004fbf38 R12: dffffc0000000000 R13: ffff88811315bc00 R14: ffff88811315bda8 R15: ffff88811315bb80 FS: 0000000000000000(0000) GS:ffff888135f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005565222e0578 CR3: 0000000026ef0000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die_body+0x5f/0xb0 ? die+0x9e/0xc0 ? do_trap+0x15a/0x3a0 ? clear_inode+0x168/0x190 ? do_error_trap+0x1dc/0x2c0 ? clear_inode+0x168/0x190 ? __pfx_do_error_trap+0x10/0x10 ? report_bug+0x3cd/0x500 ? handle_invalid_op+0x34/0x40 ? clear_inode+0x168/0x190 ? exc_invalid_op+0x38/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? clear_inode+0x57/0x190 ? clear_inode+0x167/0x190 ? clear_inode+0x168/0x190 ? clear_inode+0x167/0x190 jfs_evict_inode+0xb5/0x440 ? __pfx_jfs_evict_inode+0x10/0x10 evict+0x4ea/0x9b0 ? __pfx_evict+0x10/0x10 ? iput+0x713/0xa50 txUpdateMap+0x931/0xb10 ? __pfx_txUpdateMap+0x10/0x10 jfs_lazycommit+0x49a/0xb80 ? _raw_spin_unlock_irqrestore+0x8f/0x140 ? lockdep_hardirqs_on+0x99/0x150 ? __pfx_jfs_lazycommit+0x10/0x10 ? __pfx_default_wake_function+0x10/0x10 ? __kthread_parkme+0x169/0x1d0 ? __pfx_jfs_lazycommit+0x10/0x10 kthread+0x2f2/0x390 ? __pfx_jfs_lazycommit+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x4d/0x80 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> This happens when 'clear_inode()' makes an attempt to finalize an underlying JFS inode of unknown type. According to JFS layout description from https://jfs.sourceforge.net/project/pub/jfslayout.pdf, inode types from 5 to 15 are reserved for future extensions and should not be encountered on a valid filesystem. So add an extra check for valid inode type in 'copy_from_dinode()'. | ||||
| CVE-2023-6176 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-17 | 4.7 Medium |
| A null pointer dereference flaw was found in the Linux kernel API for the cryptographic algorithm scatterwalk functionality. This issue occurs when a user constructs a malicious packet with specific socket configuration, which could allow a local user to crash the system or escalate their privileges on the system. | ||||
| CVE-2024-57844 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix fault on fd close after unbind If userspace holds an fd open, unbinds the device and then closes it, the driver shouldn't try to access the hardware. Protect it by using drm_dev_enter()/drm_dev_exit(). This fixes the following page fault: <6> [IGT] xe_wedged: exiting, ret=98 <1> BUG: unable to handle page fault for address: ffffc901bc5e508c <1> #PF: supervisor read access in kernel mode <1> #PF: error_code(0x0000) - not-present page ... <4> xe_lrc_update_timestamp+0x1c/0xd0 [xe] <4> xe_exec_queue_update_run_ticks+0x50/0xb0 [xe] <4> xe_exec_queue_fini+0x16/0xb0 [xe] <4> __guc_exec_queue_fini_async+0xc4/0x190 [xe] <4> guc_exec_queue_fini_async+0xa0/0xe0 [xe] <4> guc_exec_queue_fini+0x23/0x40 [xe] <4> xe_exec_queue_destroy+0xb3/0xf0 [xe] <4> xe_file_close+0xd4/0x1a0 [xe] <4> drm_file_free+0x210/0x280 [drm] <4> drm_close_helper.isra.0+0x6d/0x80 [drm] <4> drm_release_noglobal+0x20/0x90 [drm] (cherry picked from commit 4ca1fd418338d4d135428a0eb1e16e3b3ce17ee8) | ||||
| CVE-2024-57880 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof_sdw: Add space for a terminator into DAIs array The code uses the initialised member of the asoc_sdw_dailink struct to determine if a member of the array is in use. However in the case the array is completely full this will lead to an access 1 past the end of the array, expand the array by one entry to include a space for a terminator. | ||||
| CVE-2024-57898 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-17 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: clear link ID from bitmap during link delete after clean up Currently, during link deletion, the link ID is first removed from the valid_links bitmap before performing any clean-up operations. However, some functions require the link ID to remain in the valid_links bitmap. One such example is cfg80211_cac_event(). The flow is - nl80211_remove_link() cfg80211_remove_link() ieee80211_del_intf_link() ieee80211_vif_set_links() ieee80211_vif_update_links() ieee80211_link_stop() cfg80211_cac_event() cfg80211_cac_event() requires link ID to be present but it is cleared already in cfg80211_remove_link(). Ultimately, WARN_ON() is hit. Therefore, clear the link ID from the bitmap only after completing the link clean-up. | ||||
| CVE-2024-57899 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix mbss changed flags corruption on 32 bit systems On 32-bit systems, the size of an unsigned long is 4 bytes, while a u64 is 8 bytes. Therefore, when using or_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE), the code is incorrectly searching for a bit in a 32-bit variable that is expected to be 64 bits in size, leading to incorrect bit finding. Solution: Ensure that the size of the bits variable is correctly adjusted for each architecture. Call Trace: ? show_regs+0x54/0x58 ? __warn+0x6b/0xd4 ? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211] ? report_bug+0x113/0x150 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x44 ? exc_invalid_op+0x18/0x50 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211] ? exc_overflow+0x30/0x30 ? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211] ? ieee80211_mesh_work+0xff/0x260 [mac80211] ? cfg80211_wiphy_work+0x72/0x98 [cfg80211] ? process_one_work+0xf1/0x1fc ? worker_thread+0x2c0/0x3b4 ? kthread+0xc7/0xf0 ? mod_delayed_work_on+0x4c/0x4c ? kthread_complete_and_exit+0x14/0x14 ? ret_from_fork+0x24/0x38 ? kthread_complete_and_exit+0x14/0x14 ? ret_from_fork_asm+0xf/0x14 ? entry_INT80_32+0xf0/0xf0 [restore no-op path for no changes] | ||||
| CVE-2024-57879 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: iso: Always release hdev at the end of iso_listen_bis Since hci_get_route holds the device before returning, the hdev should be released with hci_dev_put at the end of iso_listen_bis even if the function returns with an error. | ||||
| CVE-2024-57875 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: RCU protect disk->conv_zones_bitmap Ensure that a disk revalidation changing the conventional zones bitmap of a disk does not cause invalid memory references when using the disk_zone_is_conv() helper by RCU protecting the disk->conv_zones_bitmap pointer. disk_zone_is_conv() is modified to operate under the RCU read lock and the function disk_set_conv_zones_bitmap() is added to update a disk conv_zones_bitmap pointer using rcu_replace_pointer() with the disk zone_wplugs_lock spinlock held. disk_free_zone_resources() is modified to call disk_update_zone_resources() with a NULL bitmap pointer to free the disk conv_zones_bitmap. disk_set_conv_zones_bitmap() is also used in disk_update_zone_resources() to set the new (revalidated) bitmap and free the old one. | ||||
| CVE-2024-57839 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()" This reverts commit 7c877586da3178974a8a94577b6045a48377ff25. Anders and Philippe have reported that recent kernels occasionally hang when used with NFS in readahead code. The problem has been bisected to 7c877586da3 ("readahead: properly shorten readahead when falling back to do_page_cache_ra()"). The cause of the problem is that ra->size can be shrunk by read_pages() call and subsequently we end up calling do_page_cache_ra() with negative (read huge positive) number of pages. Let's revert 7c877586da3 for now until we can find a proper way how the logic in read_pages() and page_cache_ra_order() can coexist. This can lead to reduced readahead throughput due to readahead window confusion but that's better than outright hangs. | ||||
| CVE-2024-57809 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: imx6: Fix suspend/resume support on i.MX6QDL The suspend/resume functionality is currently broken on the i.MX6QDL platform, as documented in the NXP errata (ERR005723): https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf This patch addresses the issue by sharing most of the suspend/resume sequences used by other i.MX devices, while avoiding modifications to critical registers that disrupt the PCIe functionality. It targets the same problem as the following downstream commit: https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995 Unlike the downstream commit, this patch also resets the connected PCIe device if possible. Without this reset, certain drivers, such as ath10k or iwlwifi, will crash on resume. The device reset is also done by the driver on other i.MX platforms, making this patch consistent with existing practices. Upon resuming, the kernel will hang and display an error. Here's an example of the error encountered with the ath10k driver: ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible Unhandled fault: imprecise external abort (0x1406) at 0x0106f944 Without this patch, suspend/resume will fail on i.MX6QDL devices if a PCIe device is connected. [kwilczynski: commit log, added tag for stable releases] | ||||
| CVE-2024-57891 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix invalid irq restore in scx_ops_bypass() While adding outer irqsave/restore locking, 0e7ffff1b811 ("scx: Fix raciness in scx_ops_bypass()") forgot to convert an inner rq_unlock_irqrestore() to rq_unlock() which could re-enable IRQ prematurely leading to the following warning: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 1 PID: 96 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40 ... Sched_ext: create_dsq (enabling) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : warn_bogus_irq_restore+0x30/0x40 lr : warn_bogus_irq_restore+0x30/0x40 ... Call trace: warn_bogus_irq_restore+0x30/0x40 (P) warn_bogus_irq_restore+0x30/0x40 (L) scx_ops_bypass+0x224/0x3b8 scx_ops_enable.isra.0+0x2c8/0xaa8 bpf_scx_reg+0x18/0x30 ... irq event stamp: 33739 hardirqs last enabled at (33739): [<ffff8000800b699c>] scx_ops_bypass+0x174/0x3b8 hardirqs last disabled at (33738): [<ffff800080d48ad4>] _raw_spin_lock_irqsave+0xb4/0xd8 Drop the stray _irqrestore(). | ||||
| CVE-2024-57805 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP The linkDMA should not be released on stop trigger since a stream re-start might happen without closing of the stream. This leaves a short time for other streams to 'steal' the linkDMA since it has been released. This issue is not easy to reproduce under normal conditions as usually after stop the stream is closed, or the same stream is restarted, but if another stream got in between the stop and start, like this: aplay -Dhw:0,3 -c2 -r48000 -fS32_LE /dev/zero -d 120 CTRL+z aplay -Dhw:0,0 -c2 -r48000 -fS32_LE /dev/zero -d 120 then the link DMA channels will be mixed up, resulting firmware error or crash. | ||||
| CVE-2024-57804 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs The driver, through the SAS transport, exposes a sysfs interface to enable/disable PHYs in a controller/expander setup. When multiple PHYs are disabled and enabled in rapid succession, the persistent and current config pages related to SAS IO unit/SAS Expander pages could get corrupted. Use separate memory for each config request. | ||||
| CVE-2025-39698 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/futex: ensure io_futex_wait() cleans up properly on failure The io_futex_data is allocated upfront and assigned to the io_kiocb async_data field, but the request isn't marked with REQ_F_ASYNC_DATA at that point. Those two should always go together, as the flag tells io_uring whether the field is valid or not. Additionally, on failure cleanup, the futex handler frees the data but does not clear ->async_data. Clear the data and the flag in the error path as well. Thanks to Trend Micro Zero Day Initiative and particularly ReDress for reporting this. | ||||
| CVE-2025-38561 | 1 Linux | 1 Linux Kernel | 2025-10-17 | 8.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix Preauh_HashValue race condition If client send multiple session setup requests to ksmbd, Preauh_HashValue race condition could happen. There is no need to free sess->Preauh_HashValue at session setup phase. It can be freed together with session at connection termination phase. | ||||
| CVE-2024-57917 | 1 Linux | 1 Linux Kernel | 2025-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: topology: Keep the cpumask unchanged when printing cpumap During fuzz testing, the following warning was discovered: different return values (15 and 11) from vsnprintf("%*pbl ", ...) test:keyward is WARNING in kvasprintf WARNING: CPU: 55 PID: 1168477 at lib/kasprintf.c:30 kvasprintf+0x121/0x130 Call Trace: kvasprintf+0x121/0x130 kasprintf+0xa6/0xe0 bitmap_print_to_buf+0x89/0x100 core_siblings_list_read+0x7e/0xb0 kernfs_file_read_iter+0x15b/0x270 new_sync_read+0x153/0x260 vfs_read+0x215/0x290 ksys_read+0xb9/0x160 do_syscall_64+0x56/0x100 entry_SYSCALL_64_after_hwframe+0x78/0xe2 The call trace shows that kvasprintf() reported this warning during the printing of core_siblings_list. kvasprintf() has several steps: (1) First, calculate the length of the resulting formatted string. (2) Allocate a buffer based on the returned length. (3) Then, perform the actual string formatting. (4) Check whether the lengths of the formatted strings returned in steps (1) and (2) are consistent. If the core_cpumask is modified between steps (1) and (3), the lengths obtained in these two steps may not match. Indeed our test includes cpu hotplugging, which should modify core_cpumask while printing. To fix this issue, cache the cpumask into a temporary variable before calling cpumap_print_{list, cpumask}_to_buf(), to keep it unchanged during the printing process. | ||||
| CVE-2024-57904 | 1 Linux | 1 Linux Kernel | 2025-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: at91: call input_free_device() on allocated iio_dev Current implementation of at91_ts_register() calls input_free_deivce() on st->ts_input, however, the err label can be reached before the allocated iio_dev is stored to st->ts_input. Thus call input_free_device() on input instead of st->ts_input. | ||||
| CVE-2025-21701 | 1 Linux | 1 Linux Kernel | 2025-10-16 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: avoid race between device unregistration and ethnl ops The following trace can be seen if a device is being unregistered while its number of channels are being modified. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120 CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771 RIP: 0010:__mutex_lock+0xc8a/0x1120 Call Trace: <TASK> ethtool_check_max_channel+0x1ea/0x880 ethnl_set_channels+0x3c3/0xb10 ethnl_default_set_doit+0x306/0x650 genl_family_rcv_msg_doit+0x1e3/0x2c0 genl_rcv_msg+0x432/0x6f0 netlink_rcv_skb+0x13d/0x3b0 genl_rcv+0x28/0x40 netlink_unicast+0x42e/0x720 netlink_sendmsg+0x765/0xc20 __sys_sendto+0x3ac/0x420 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because unregister_netdevice_many_notify might run before the rtnl lock section of ethnl operations, eg. set_channels in the above example. In this example the rss lock would be destroyed by the device unregistration path before being used again, but in general running ethnl operations while dismantle has started is not a good idea. Fix this by denying any operation on devices being unregistered. A check was already there in ethnl_ops_begin, but not wide enough. Note that the same issue cannot be seen on the ioctl version (__dev_ethtool) because the device reference is retrieved from within the rtnl lock section there. Once dismantle started, the net device is unlisted and no reference will be found. | ||||
| CVE-2024-57918 | 1 Linux | 1 Linux Kernel | 2025-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix page fault due to max surface definition mismatch DC driver is using two different values to define the maximum number of surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as the unique definition for surface updates across DC. It fixes page fault faced by Cosmic users on AMD display versions that support two overlay planes, since the introduction of cursor overlay mode. [Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b [ +0.000015] #PF: supervisor read access in kernel mode [ +0.000006] #PF: error_code(0x0000) - not-present page [ +0.000005] PGD 0 P4D 0 [ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300 [ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper] [ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b [ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206 [ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070 [ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000 [ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000 [ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000 [ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000 [ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0 [ +0.000005] Call Trace: [ +0.000011] <TASK> [ +0.000010] ? __die_body.cold+0x19/0x27 [ +0.000012] ? page_fault_oops+0x15a/0x2d0 [ +0.000014] ? exc_page_fault+0x7e/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu] [ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu] [ +0.000450] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu] [ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu] [ +0.000464] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? sort+0x31/0x50 [ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu] [ +0.000508] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu] [ +0.000377] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm] [ +0.000058] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_default_wait+0x8c/0x260 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? wait_for_completion_timeout+0x13b/0x170 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_wait_timeout+0x108/0x140 [ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper] [ +0.000024] ? process_one_work+0x177/0x330 [ +0.000008] ? worker_thread+0x266/0x3a0 [ +0.000006] ? __pfx_worker_thread+0x10/0x10 [ +0.000004] ? kthread+0xd2/0x100 [ +0.000006] ? __pfx_kthread+0x10/0x10 [ +0.000006] ? ret_from_fork+0x34/0x50 [ +0.000004] ? __pfx_kthread+0x10/0x10 [ +0.000005] ? ret_from_fork_asm+0x1a/0x30 [ +0.000011] </TASK> (cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7) | ||||
| CVE-2025-21653 | 1 Linux | 1 Linux Kernel | 2025-10-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: cls_flow: validate TCA_FLOW_RSHIFT attribute syzbot found that TCA_FLOW_RSHIFT attribute was not validated. Right shitfing a 32bit integer is undefined for large shift values. UBSAN: shift-out-of-bounds in net/sched/cls_flow.c:329:23 shift exponent 9445 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 1 UID: 0 PID: 54 Comm: kworker/u8:3 Not tainted 6.13.0-rc3-syzkaller-00180-g4f619d518db9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468 flow_classify+0x24d5/0x25b0 net/sched/cls_flow.c:329 tc_classify include/net/tc_wrapper.h:197 [inline] __tcf_classify net/sched/cls_api.c:1771 [inline] tcf_classify+0x420/0x1160 net/sched/cls_api.c:1867 sfb_classify net/sched/sch_sfb.c:260 [inline] sfb_enqueue+0x3ad/0x18b0 net/sched/sch_sfb.c:318 dev_qdisc_enqueue+0x4b/0x290 net/core/dev.c:3793 __dev_xmit_skb net/core/dev.c:3889 [inline] __dev_queue_xmit+0xf0e/0x3f50 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 iptunnel_xmit+0x55d/0x9b0 net/ipv4/ip_tunnel_core.c:82 udp_tunnel_xmit_skb+0x262/0x3b0 net/ipv4/udp_tunnel_core.c:173 geneve_xmit_skb drivers/net/geneve.c:916 [inline] geneve_xmit+0x21dc/0x2d00 drivers/net/geneve.c:1039 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x27a/0x7d0 net/core/dev.c:3606 __dev_queue_xmit+0x1b73/0x3f50 net/core/dev.c:4434 | ||||